Netduma Fraser

Buenas noticias, gracias por hacer eso. ¡Qué problema tan extraño!

They've taken off the ability to apply at the moment, not sure why, either because they'll open it again closer to the time or they'll do an open beta.

Hey, welcome to the forum! I've added you both. I've added you both.

Gracias por eso. Desafortunadamente, eso no está relacionado, si actualiza, restablece los valores de fábrica, luego reduce y restablece, ¿sigue viendo dos redes?

No sé cómo es posible después de un restablecimiento de fábrica. Intente actualizar de nuevo a 3.0 y luego vuelva a bajar de categoría.

It's unlikely to be the firmware specifically but you can downgrade to the pre beta firmware using this version the same way you upgraded http://kb.netgear.com/000061157 Great to hear that! We need to do a bit more on that as identified by the users.

¿Lo ve en sus otros dispositivos además de unirse?

It's on our roadmap but I couldn't say when this would be implemented exactly.

Hey, not specifically, we're trying to get it out as fast as possible.

Muy extraño. Desactive el WiFi en el enrutador, aplique y reinicie. Luego habilítelo, aplique, reinicie. Asegúrese de estar conectado a través de Ethernet cuando haga eso. Vea si solo muestra el SSID después de eso.

Hey, welcome to the forum! It's not possible at the moment but we are looking into implementing something to control it from the interface.

We will put out a separate file for that so that will come soon.

That MTU is ridiculous, I'm not surprised it is taking you so long, you've probably got fragmentation. MTU is a placebo affect when it comes to online gaming.

That should be pretty soon, within the next few weeks I suspect. The Rapp store will be included but as it's not our hardware it is up to Netgear what they want on it - I can't imagine they won't want the features. The change log has been included in the post

¿Puede proporcionar una captura de pantalla de lo que está viendo, por favor?

@Apoc thanks for letting us know and glad you got it working again. The new firmware is in testing now and should be available next week and should fix this issue.

For what router?

Okay so I would recommend you connect all your devices to the R2 as those devices connected to the hub will be pulling bandwidth away from the R2 and it won't be able to control it. On the R2 give the R2 a static IP in Settings and for DHCP Lease hours set that to 168. Put the R2 WAN IP found in the System Information page into the DMZ on the hub instead. The second one is definitely the best!

Do you have any devices connected to the hub via ethernet or WiFi? Have you put the hub in modem, bridge mode or put the R2 WAN IP in the DMZ? Could you screenshot the benchmark results? I'm interested in the specific numbers and spikes.

As with all their routers they will decide which features will appear on the router. For example the XR300 doesn't have the Hybrid VPN.

That sounds like a congestion issue then. What is your exact physical setup? What speeds do you get/pay for? Are you using QoS? What are your Connection Benchmark results?

Olvídate' del WiFi en tu PC, ¿desaparece entonces?

It shoots to that ping when viewing the ping in game or on the Geo-Filter? They're different readings so it is important to know which one is spiking.

No lo sigo, ¿estás diciendo que hay una red que aparece en tu lista de WiFi de cuando tenías instalado 3.0 anteriormente? Si es así 'olvídate' del WiFi en tu PC, ¿desaparece entonces? - I don't follow, are you saying there is a network appearing on your WiFi list from when you previously had 3.0 installed? If so 'forget' the WiFi on your PC, does it disappear then?

It hasn't been disabled again, the version has been up since Tuesday https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/Latest-firmware-download/td-p/1976833 Hey, welcome to the forum! It is up to Netgear to decide what features make it onto the router as it is their hardware so we'll have to see.