kinel Posted December 15, 2019 Author Share Posted December 15, 2019 2 hours ago, Kostas83 said: Hi guys!! The last 2 days I had the worst experience with hit detection... I had the following settings: ABB off QoS enable traffic priorization with this ports 3074:3075 - 3100:3500 3100:3500 - 3074:3075 3074:3075 - 30000:45000 30000:45000 - 3074:3075 Yesterday twice it happen to shoot on an enemy at least 5-6 bullets and non of one bullet give hit detection. From the kill cam the game shows that never shoot him!! i decide to reset the router and set it up as normal... ABB on 70% QoS enable and activate the Duma classified games ON. I play and my game experience is very good but not perfect... Now I am little be confused 🥴🥴 what I should do... I did something wrong with my first setup?? I tied to manage the Wireshark to find the ports with no success... I play on PS4 and i leave in Europe. Those settings to me look good byt i would delete the first two rules 3100 3500 as i dont thin there needed Kostas83 1 Link to comment Share on other sites More sharing options...
Kostas83 Posted December 15, 2019 Share Posted December 15, 2019 2 hours ago, kinel said: Those settings to me look good byt i would delete the first two rules 3100 3500 as i dont thin there needed Hi Kinel i will give a try with your suggestion. I will do a reset to the router and I will set it with the second couple of rules. Thank you! Link to comment Share on other sites More sharing options...
Zippy Posted December 16, 2019 Share Posted December 16, 2019 13 hours ago, Netduma Fraser said: The bandwidth that is used by the game even with stats etc is not very much at all so I doubt it would really affect the state of the game to prioritize them or not. There is no problem putting in a range of ports either as if there are ports not being used they simply won't be prioritized. I get that putting in individual rules is working and I'm really pleased to hear that and I have asked directly if being able to see port usage will be implemented in 3.0 so when I get an answer I will let you guys know. Please Fraser by all means let us know once you get an answer. This really would be nice to see! Zippy. Link to comment Share on other sites More sharing options...
OverTheReminds Posted December 16, 2019 Share Posted December 16, 2019 I would like to try it out but the guide is rushed and confusionary, would you mind explaining it slower step by step? Link to comment Share on other sites More sharing options...
kinel Posted December 17, 2019 Author Share Posted December 17, 2019 All you need to do is put these ports into taffic proirtization Rule1 source start 3074 3075 end destination 30000 45000 udp Rule 2 start source 30000 45000 end destination 3074 3075 udp These ports you put in will make you hit detection briliant Thats The simplest way to explain it This guide was made a long time ago for bo4 Thats why its confusing sorry But you could use the ports i posted here instesd of the old ones But throughout this thread users here gave some great helpful advice and shown details on how to do it as well East on these forum has a better guide than mine its brilliant i think if you do read it read through it all theres lots of good help from users in it A user on his guide shows a tactical nuke from using easts guide This thread was never meant as a guide Link to comment Share on other sites More sharing options...
kinel Posted December 17, 2019 Author Share Posted December 17, 2019 14 hours ago, OverTheReminds said: I would like to try it out but the guide is rushed and confusionary, would you mind explaining it slower step by step? Read post above this one its for you i forgot to tag you in it sorry Link to comment Share on other sites More sharing options...
OverTheReminds Posted December 17, 2019 Share Posted December 17, 2019 8 hours ago, kinel said: Read post above this one its for you i forgot to tag you in it sorry Thanks, however my problem is that I don't know how to put the ports in the traffic priorization EDIT: Never mind, solved, I'll give it a try later, thanks in advance Link to comment Share on other sites More sharing options...
Doughboy Posted December 21, 2019 Share Posted December 21, 2019 I was wondering does using the game profiles on the geo filter help in call of duty? Besides the open nat and udp settings? Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted December 23, 2019 Netduma Staff Share Posted December 23, 2019 On 12/21/2019 at 2:37 PM, Doughboy said: I was wondering does using the game profiles on the geo filter help in call of duty? Besides the open nat and udp settings? Those Geo-Filter profiles just give you the recommended distance / Ping Assist / Strict Mode setting for that game. We've plans to improve profiles in the future for the Geo-Filter BlackstormTX 1 Link to comment Share on other sites More sharing options...
Crazy Cat Posted January 5, 2020 Share Posted January 5, 2020 On 10/31/2018 at 2:31 PM, kinel said: I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO It also now shows you how to traffic protize cod mw ports 2019 below I WILL POST COD MW PORTS jUST BELOW HERE these are the ones i found so far i will keep updating it with new ones here I recently upgraded to new dumar os fw and think its great but its missing one thing important i think In network monitor it now does not show you what ports the game you play is connected to uses In cod bo4 now cod mw 20019 i used this feature all the time In cod bo4 same for cod mw19 everytime you would join a new lobby it would show us new ports it was connected to. You would always be connected to two ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys the game changes ports it uses so you need to put new ports in traffic priortaztion I think this is why the connection keeps varying For cod mw 2019 its now three ports instead of two HERES WHY ITS IMPORTANT when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration .And on cod bo4 Somtimes i would do this during a game. i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019 EVEN IF YOUR NOT PLAYING COD you still might need it for other games. i used it for all my other games to help get a better connection and i would like to use it in the future for new games I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT SO ANY GAME YOU WANNA SEE WHAT PORTS IT USES YOU NEED THIS As some games it dosent tell you all the ports it uses I would love to use this for red dead redemption 2 online when its released soon Fraser told me if enough peole want this feture back in the firmware they would put it back in SO I JUST PUT A POLL UP SO PLEASE VOTE THANKY YOU So i am asking any who might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update I hope i made sence sorry for any typos And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there Thanks i have now edited to update for cod mw READ FROM HERE for cod mw 2019 and how to set up ports correctly From members who know how to set it up correctly below RL317 shows how to in this post below He knows more about it than i do ahe advised me how to set it up correctly Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor My hit detection \hit registration is now brilliant since i done these steps Heres why If you want your hit registration or hit detection to be great read this When playing cod mw the game uses 3 ports to play thats if you want godd hit detection \hit registration The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc The second port stays the same untill you restart the game i think this is the data centre or either matchmaking The 3rd port is changes every new game this is the dedi or peer your playing on Thats why you see new people every game and thats why you do good one game but not the next Thats because you changed dedis and the ports have changed So thats why you need 3 ports every game the first is 3074 the send is the matchmaking or data centre the 3rd is for the game mode you play Atm i am making a list for the ports it uses Just letting you know you can do this yourself to see what ports is needed but you have to downgrade to the older firmware well thats on netdumar1 I dont know about other routers Also this cane be done if you have a router with openwrt on it You would have to ask admins as i dont know anything about the other routers Heres a way to put the ports in traffic priortization Source 3074-3075 destination 30000-45000 udp rule 1 Source 30000-45000 destination 3074-3075 udp rule 2 Source 3074-3075 destination 3100-3500 udp rule 3 not nessasery optional Source 3100-3500 destination 3074-3075 udp rule 4 not nessssery optional HERES A LOAD OF PORTS TH GAMES COD MW USES Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019 192.168.88.119 9308 9308 192.168.88.119 UDP DemonwarePortMapping 3074 3074 192.168.88.119 UDP DemonwarePortMapping 3163 3074 192.168.88.55 UDP DemonwarePortMapping 3153 3074 192.168.88.55 UDP DemonwarePortMapping 3172 3074 192.168.88.55 UDP DemonwarePortMapping 3184 3074 192.168.88.55 UDP DemonwarePortMapping 3155 3074 192.168.88.55 UDP DemonwarePortMapping 3123 3074 192.168.88.55 UDP DemonwarePortMapping 3102 3074 192.168.88.55 UDP DemonwarePortMapping 3148 3074 192.168.88.55 UDP DemonwarePortMapping 3111 3074 192.168.88.55 UDP DemonwarePortMapping 3124 3074 192.168.88.55 UDP DemonwarePortMapping 3131 3074 192.168.88.55 UDP DemonwarePortMapping 3150 3074 192.168.88.55 UDP DemonwarePortMapping 3192 3074 192.168.88.55 UDP DemonwarePortMapping 3176 3074 192.168.88.55 UDP DemonwarePortMapping 3125 3074 192.168.88.55 UDP DemonwarePortMapping 3129 3074 192.168.88.55 UDP DemonwarePortMapping 3177 3074 192.168.88.55 UDP DemonwarePortMapping 3115 3074 192.168.88.55 UDP DemonwarePortMapping 3162 3074 192.168.88.55 UDP DemonwarePortMapping 3116 3074 192.168.88.55 UDP DemonwarePortMapping 3147 3074 192.168.88.55 UDP DemonwarePortMapping 3134 3074 192.168.88.55 UDP DemonwarePortMapping 3133 3074 192.168.88.55 UDP DemonwarePortMapping 3100 3074 192.168.88.55 UDP DemonwarePortMapping 3109 3074 192.168.88.55 UDP DemonwarePortMapping 3095 3074 192.168.88.55 UDP DemonwarePortMapping 3127 3074 192.168.88.55 UDP DemonwarePortMapping 3190 3074 192.168.88.55 UDP DemonwarePortMapping 3117 3074 192.168.88.55 UDP DemonwarePortMapping 3126 3074 192.168.88.55 UDP DemonwarePortMapping 3084 3074 192.168.88.55 UDP DemonwarePortMapping 3182 3074 192.168.88.55 UDP DemonwarePortMapping 3138 3074 192.168.88.55 UDP DemonwarePortMapping 3175 3074 192.168.88.55 UDP DemonwarePortMapping 3171 3074 192.168.88.55 UDP DemonwarePortMapping 3165 3074 192.168.88.55 UDP DemonwarePortMapping 3180 3074 192.168.88.55 UDP DemonwarePortMapping 3169 3074 192.168.88.55 UDP DemonwarePortMapping 3085 3074 192.168.88.55 UDP DemonwarePortMapping 3105 3074 192.168.88.55 UDPDemonwarePortMapping 3194 3074 192.168.88.55 UDP DemonwarePortMapping 3074 3074 192.168.88.55 UDP 192.168.88.55 9308 9308 192.168.88.55 UDP Btw i noticed everytime i reset cod mw 2019 these more was added they were added one at a time So i thought these ports are needed as well but now i think there optsinal Here are the ports network monitor shows are in use for cod mw 2019 i will add more when i find them 30410 35710 30350 31300 35300 37160 31350 36360 32700 32710 39860 38280 39500 42420 43300 30040 30080 32560 31080 32540 30110 30020 30030 30070 30230 30500 30600 31030 32930 33640 34260 36050 36290 36930 39550 43610 43840 44790 30020 :30010 :32680 32310 :32350 :30190 :34790 :34790 :30070 30100 32560 :32580 30060 33420 33420 40820 36800 32310 30550 30520 30130 30060 35310 32550 30040 30310 30160 32590 39300 32460 32490 32550 35800 3258032570 These ports made into a range by east so thank you to them They have a brilliant guide on these forums i recken you guys read it I think its the best one Please if you found this helpful please vote this thread was started over a year ago and we are still have no clue if there gonna bring it back SORRY IF I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD But you can still see how the people use traffick prortization correctly you just input your ports instead of the outdated ones Hi, I put like me to the first post and voted your poll hoping to see that option also on xr450/500/700. I wanted to ask you please if you can help me read the traffic via wireshark. I start the program, but I can't find either the ps4 ip address (I find it but not for traffic) or the 3074 udp port. Should I give some rules before starting it? If you could help me out, I'd really appreciate it. Link to comment Share on other sites More sharing options...
kinel Posted January 5, 2020 Author Share Posted January 5, 2020 Daniele sorry i cant help you as i have never used wireshark theres many members here who have like ghost east Post in there thread and they may help you sorry Btw thank you for voting Link to comment Share on other sites More sharing options...
SolidOny Posted April 18, 2020 Share Posted April 18, 2020 On 10/31/2018 at 9:31 AM, kinel said: I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO It also now shows you how to traffic protize cod mw ports 2019 below I WILL POST COD MW PORTS jUST BELOW HERE these are the ones i found so far i will keep updating it with new ones here I recently upgraded to new dumar os fw and think its great but its missing one thing important i think In network monitor it now does not show you what ports the game you play is connected to uses In cod bo4 now cod mw 20019 i used this feature all the time In cod bo4 same for cod mw19 everytime you would join a new lobby it would show us new ports it was connected to. You would always be connected to two ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys the game changes ports it uses so you need to put new ports in traffic priortaztion I think this is why the connection keeps varying For cod mw 2019 its now three ports instead of two HERES WHY ITS IMPORTANT when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration .And on cod bo4 Somtimes i would do this during a game. i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019 EVEN IF YOUR NOT PLAYING COD you still might need it for other games. i used it for all my other games to help get a better connection and i would like to use it in the future for new games I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT SO ANY GAME YOU WANNA SEE WHAT PORTS IT USES YOU NEED THIS As some games it dosent tell you all the ports it uses I would love to use this for red dead redemption 2 online when its released soon Fraser told me if enough peole want this feture back in the firmware they would put it back in SO I JUST PUT A POLL UP SO PLEASE VOTE THANKY YOU So i am asking any who might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update I hope i made sence sorry for any typos And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there Thanks i have now edited to update for cod mw READ FROM HERE for cod mw 2019 and how to set up ports correctly From members who know how to set it up correctly below RL317 shows how to in this post below He knows more about it than i do ahe advised me how to set it up correctly Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor My hit detection \hit registration is now brilliant since i done these steps Heres why If you want your hit registration or hit detection to be great read this When playing cod mw the game uses 3 ports to play thats if you want godd hit detection \hit registration The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc The second port stays the same untill you restart the game i think this is the data centre or either matchmaking The 3rd port is changes every new game this is the dedi or peer your playing on Thats why you see new people every game and thats why you do good one game but not the next Thats because you changed dedis and the ports have changed So thats why you need 3 ports every game the first is 3074 the send is the matchmaking or data centre the 3rd is for the game mode you play Atm i am making a list for the ports it uses Just letting you know you can do this yourself to see what ports is needed but you have to downgrade to the older firmware well thats on netdumar1 I dont know about other routers Also this cane be done if you have a router with openwrt on it You would have to ask admins as i dont know anything about the other routers Heres a way to put the ports in traffic priortization Source 3074-3075 destination 30000-45000 udp rule 1 Source 30000-45000 destination 3074-3075 udp rule 2 Source 3074-3075 destination 3100-3500 udp rule 3 not nessasery optional Source 3100-3500 destination 3074-3075 udp rule 4 not nessssery optional HERES A LOAD OF PORTS TH GAMES COD MW USES Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019 192.168.88.119 9308 9308 192.168.88.119 UDP DemonwarePortMapping 3074 3074 192.168.88.119 UDP DemonwarePortMapping 3163 3074 192.168.88.55 UDP DemonwarePortMapping 3153 3074 192.168.88.55 UDP DemonwarePortMapping 3172 3074 192.168.88.55 UDP DemonwarePortMapping 3184 3074 192.168.88.55 UDP DemonwarePortMapping 3155 3074 192.168.88.55 UDP DemonwarePortMapping 3123 3074 192.168.88.55 UDP DemonwarePortMapping 3102 3074 192.168.88.55 UDP DemonwarePortMapping 3148 3074 192.168.88.55 UDP DemonwarePortMapping 3111 3074 192.168.88.55 UDP DemonwarePortMapping 3124 3074 192.168.88.55 UDP DemonwarePortMapping 3131 3074 192.168.88.55 UDP DemonwarePortMapping 3150 3074 192.168.88.55 UDP DemonwarePortMapping 3192 3074 192.168.88.55 UDP DemonwarePortMapping 3176 3074 192.168.88.55 UDP DemonwarePortMapping 3125 3074 192.168.88.55 UDP DemonwarePortMapping 3129 3074 192.168.88.55 UDP DemonwarePortMapping 3177 3074 192.168.88.55 UDP DemonwarePortMapping 3115 3074 192.168.88.55 UDP DemonwarePortMapping 3162 3074 192.168.88.55 UDP DemonwarePortMapping 3116 3074 192.168.88.55 UDP DemonwarePortMapping 3147 3074 192.168.88.55 UDP DemonwarePortMapping 3134 3074 192.168.88.55 UDP DemonwarePortMapping 3133 3074 192.168.88.55 UDP DemonwarePortMapping 3100 3074 192.168.88.55 UDP DemonwarePortMapping 3109 3074 192.168.88.55 UDP DemonwarePortMapping 3095 3074 192.168.88.55 UDP DemonwarePortMapping 3127 3074 192.168.88.55 UDP DemonwarePortMapping 3190 3074 192.168.88.55 UDP DemonwarePortMapping 3117 3074 192.168.88.55 UDP DemonwarePortMapping 3126 3074 192.168.88.55 UDP DemonwarePortMapping 3084 3074 192.168.88.55 UDP DemonwarePortMapping 3182 3074 192.168.88.55 UDP DemonwarePortMapping 3138 3074 192.168.88.55 UDP DemonwarePortMapping 3175 3074 192.168.88.55 UDP DemonwarePortMapping 3171 3074 192.168.88.55 UDP DemonwarePortMapping 3165 3074 192.168.88.55 UDP DemonwarePortMapping 3180 3074 192.168.88.55 UDP DemonwarePortMapping 3169 3074 192.168.88.55 UDP DemonwarePortMapping 3085 3074 192.168.88.55 UDP DemonwarePortMapping 3105 3074 192.168.88.55 UDPDemonwarePortMapping 3194 3074 192.168.88.55 UDP DemonwarePortMapping 3074 3074 192.168.88.55 UDP 192.168.88.55 9308 9308 192.168.88.55 UDP Btw i noticed everytime i reset cod mw 2019 these more was added they were added one at a time So i thought these ports are needed as well but now i think there optsinal Here are the ports network monitor shows are in use for cod mw 2019 i will add more when i find them 30410 35710 30350 31300 35300 37160 31350 36360 32700 32710 39860 38280 39500 42420 43300 30040 30080 32560 31080 32540 30110 30020 30030 30070 30230 30500 30600 31030 32930 33640 34260 36050 36290 36930 39550 43610 43840 44790 30020 :30010 :32680 32310 :32350 :30190 :34790 :34790 :30070 30100 32560 :32580 30060 33420 33420 40820 36800 32310 30550 30520 30130 30060 35310 32550 30040 30310 30160 32590 39300 32460 32490 32550 35800 3258032570 These ports made into a range by east so thank you to them They have a brilliant guide on these forums i recken you guys read it I think its the best one Please if you found this helpful please vote this thread was started over a year ago and we are still have no clue if there gonna bring it back SORRY IF I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD But you can still see how the people use traffick prortization correctly you just input your ports instead of the outdated ones Hello! im new to this of port forwarding. Ive bought my netgear router for gaming as i Live in the caribbean (PUERTO RICO) and i want the best hit registration possible. My geo filter is set to florida US that there is a dedicated server sometimes connects to georgia but i think thats when the servers nearest are full. all i need to do is port forward THIS number? 3074 UDP? i dont know much about the router so thats why i try to read everything before asking. as im traducing everything in my head lol Thanks in advance! Link to comment Share on other sites More sharing options...
kinel Posted April 19, 2020 Author Share Posted April 19, 2020 To get the best hit reg hit detection You wanna use traffi priortozation in the qos settings You want to put these in the traffic priotization Rule 1 source start 3074 end 3075 destination start 30000 end 45000 udp protocol Rule 2 source start 30000 end 45000 destination start 3074 end3075 udp protocol These other rules are optional Rule 3 source start 3074 end 3075 destination start 3100 end 3500 udp protocol Rule 4 source start 3100 end 3500 destination start 3074 end 3075 udp protocol Rule 5 source start 3074end 3075 destination start50000 end 65535 tcp Rule 6 source start 50000 end 65535 destination start 3074 end 3075 You can try these this is for both xbox and ps4 as you never mentioned what you play on Also i would disable classified games in traffic priotization I hope this help Link to comment Share on other sites More sharing options...
TomaLLoS Posted May 5, 2020 Share Posted May 5, 2020 Just checked this and after few matches I noticed better registration! It works for me ! But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted May 5, 2020 Administrators Share Posted May 5, 2020 1 hour ago, TomaLLoS said: Just checked this and after few matches I noticed better registration! It works for me ! But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? You don't need to open the ports at the same time, if you have an Open NAT then you don't need to change anything else. UPnP should open the ports for you when needed. Link to comment Share on other sites More sharing options...
TomaLLoS Posted May 6, 2020 Share Posted May 6, 2020 19 hours ago, Netduma Fraser said: You don't need to open the ports at the same time, if you have an Open NAT then you don't need to change anything else. UPnP should open the ports for you when needed. Oke that means I should live UPnP on and disabled DMZ if I understand correctly. Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted May 6, 2020 Administrators Share Posted May 6, 2020 15 minutes ago, TomaLLoS said: Oke that means I should live UPnP on and disabled DMZ if I understand correctly. Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering Yes that's right, though UPnP and DMZ isn't too bad but do try with it disabled first. EL ALE64 and TomaLLoS 2 Link to comment Share on other sites More sharing options...
kinel Posted May 7, 2020 Author Share Posted May 7, 2020 On 5/5/2020 at 10:10 PM, TomaLLoS said: Just checked this and after few matches I noticed better registration! It works for me ! But I have a question about port forwarding. Do I need to open those ports manually also in the port forwarding option ? Because this is just a prioritization for those ports and ports have to be added manually in port forwarding right ? Or UPnP will also work in this case? Or should I totally open them via DMZ ? You could try with dmz enabled thats what i would do Also please remember to vote if this helped you TomaLLoS 1 Link to comment Share on other sites More sharing options...
Sable Posted May 7, 2020 Share Posted May 7, 2020 15 hours ago, TomaLLoS said: Oke that means I should live UPnP on and disabled DMZ if I understand correctly. Because I noticed that should be only one option available at the same time. For example if I have UPnP then port forwarding should be off, and DMZ and port triggering I personally port forward and turn off upnp. DMZ should only be used as last resort. TomaLLoS 1 Link to comment Share on other sites More sharing options...
Sable Posted May 7, 2020 Share Posted May 7, 2020 On 10/31/2018 at 1:31 PM, kinel said: I HAVE UPDATED IT FOR COD MW READ JUST BELOW HOPE ITS NOT TO CONFUSING BUT THIS TOPIC WAS STARTED A LONG TIME AGO It also now shows you how to traffic protize cod mw ports 2019 below I WILL POST COD MW PORTS jUST BELOW HERE these are the ones i found so far i will keep updating it with new ones here I recently upgraded to new dumar os fw and think its great but its missing one thing important i think In network monitor it now does not show you what ports the game you play is connected to uses In cod bo4 now cod mw 20019 i used this feature all the time In cod bo4 same for cod mw19 everytime you would join a new lobby it would show us new ports it was connected to. You would always be connected to two ports in every game this first port is always port 3074 udp the second was always diffrent ever new lobby you join uses diffrent ports If you stayed in the same lobby for an hour the two ports would be the same for an hour or how long you stayed in that lobby . Once you change lobbys the game changes ports it uses so you need to put new ports in traffic priortaztion I think this is why the connection keeps varying For cod mw 2019 its now three ports instead of two HERES WHY ITS IMPORTANT when i put in the ports it uses for that game in traffic priortization my hit registration would get a lot lot better i did this before on cod ww2 now i do it for cod mw2019 and it helped my hit registration .And on cod bo4 Somtimes i would do this during a game. i would be playing a game and struggling to get a kill then in same lobby same people playing i would enter those port number in and the hit registration was great easier kills same for cod mw2019 EVEN IF YOUR NOT PLAYING COD you still might need it for other games. i used it for all my other games to help get a better connection and i would like to use it in the future for new games I really dont wanna downgrade to an older fw just to use this feature as it was so GREAT SO ANY GAME YOU WANNA SEE WHAT PORTS IT USES YOU NEED THIS As some games it dosent tell you all the ports it uses I would love to use this for red dead redemption 2 online when its released soon Fraser told me if enough peole want this feture back in the firmware they would put it back in SO I JUST PUT A POLL UP SO PLEASE VOTE THANKY YOU So i am asking any who might use it before or might wanna use it in the future please vote on the poll here if you would like to see it in i future update I hope i made sence sorry for any typos And please post to say you would like it the more people who say they want it they saidthey would reinstall it if the demands there Thanks i have now edited to update for cod mw READ FROM HERE for cod mw 2019 and how to set up ports correctly From members who know how to set it up correctly below RL317 shows how to in this post below He knows more about it than i do ahe advised me how to set it up correctly Just letting you guys know i think now playing cod mw that the next update that the dumar has has to reinstall the older network monitor My hit detection \hit registration is now brilliant since i done these steps Heres why If you want your hit registration or hit detection to be great read this When playing cod mw the game uses 3 ports to play thats if you want godd hit detection \hit registration The first is port 3074 this is on ps4 i think its 3075 on xbox but i am not sure i dont know about pc The second port stays the same untill you restart the game i think this is the data centre or either matchmaking The 3rd port is changes every new game this is the dedi or peer your playing on Thats why you see new people every game and thats why you do good one game but not the next Thats because you changed dedis and the ports have changed So thats why you need 3 ports every game the first is 3074 the send is the matchmaking or data centre the 3rd is for the game mode you play Atm i am making a list for the ports it uses Just letting you know you can do this yourself to see what ports is needed but you have to downgrade to the older firmware well thats on netdumar1 I dont know about other routers Also this cane be done if you have a router with openwrt on it You would have to ask admins as i dont know anything about the other routers Heres a way to put the ports in traffic priortization Source 3074-3075 destination 30000-45000 udp rule 1 Source 30000-45000 destination 3074-3075 udp rule 2 Source 3074-3075 destination 3100-3500 udp rule 3 not nessasery optional Source 3100-3500 destination 3074-3075 udp rule 4 not nessssery optional HERES A LOAD OF PORTS TH GAMES COD MW USES Heres is a copy of my upnp settings screen after playing a losd of cod mw 2019 192.168.88.119 9308 9308 192.168.88.119 UDP DemonwarePortMapping 3074 3074 192.168.88.119 UDP DemonwarePortMapping 3163 3074 192.168.88.55 UDP DemonwarePortMapping 3153 3074 192.168.88.55 UDP DemonwarePortMapping 3172 3074 192.168.88.55 UDP DemonwarePortMapping 3184 3074 192.168.88.55 UDP DemonwarePortMapping 3155 3074 192.168.88.55 UDP DemonwarePortMapping 3123 3074 192.168.88.55 UDP DemonwarePortMapping 3102 3074 192.168.88.55 UDP DemonwarePortMapping 3148 3074 192.168.88.55 UDP DemonwarePortMapping 3111 3074 192.168.88.55 UDP DemonwarePortMapping 3124 3074 192.168.88.55 UDP DemonwarePortMapping 3131 3074 192.168.88.55 UDP DemonwarePortMapping 3150 3074 192.168.88.55 UDP DemonwarePortMapping 3192 3074 192.168.88.55 UDP DemonwarePortMapping 3176 3074 192.168.88.55 UDP DemonwarePortMapping 3125 3074 192.168.88.55 UDP DemonwarePortMapping 3129 3074 192.168.88.55 UDP DemonwarePortMapping 3177 3074 192.168.88.55 UDP DemonwarePortMapping 3115 3074 192.168.88.55 UDP DemonwarePortMapping 3162 3074 192.168.88.55 UDP DemonwarePortMapping 3116 3074 192.168.88.55 UDP DemonwarePortMapping 3147 3074 192.168.88.55 UDP DemonwarePortMapping 3134 3074 192.168.88.55 UDP DemonwarePortMapping 3133 3074 192.168.88.55 UDP DemonwarePortMapping 3100 3074 192.168.88.55 UDP DemonwarePortMapping 3109 3074 192.168.88.55 UDP DemonwarePortMapping 3095 3074 192.168.88.55 UDP DemonwarePortMapping 3127 3074 192.168.88.55 UDP DemonwarePortMapping 3190 3074 192.168.88.55 UDP DemonwarePortMapping 3117 3074 192.168.88.55 UDP DemonwarePortMapping 3126 3074 192.168.88.55 UDP DemonwarePortMapping 3084 3074 192.168.88.55 UDP DemonwarePortMapping 3182 3074 192.168.88.55 UDP DemonwarePortMapping 3138 3074 192.168.88.55 UDP DemonwarePortMapping 3175 3074 192.168.88.55 UDP DemonwarePortMapping 3171 3074 192.168.88.55 UDP DemonwarePortMapping 3165 3074 192.168.88.55 UDP DemonwarePortMapping 3180 3074 192.168.88.55 UDP DemonwarePortMapping 3169 3074 192.168.88.55 UDP DemonwarePortMapping 3085 3074 192.168.88.55 UDP DemonwarePortMapping 3105 3074 192.168.88.55 UDPDemonwarePortMapping 3194 3074 192.168.88.55 UDP DemonwarePortMapping 3074 3074 192.168.88.55 UDP 192.168.88.55 9308 9308 192.168.88.55 UDP Btw i noticed everytime i reset cod mw 2019 these more was added they were added one at a time So i thought these ports are needed as well but now i think there optsinal Here are the ports network monitor shows are in use for cod mw 2019 i will add more when i find them 30410 35710 30350 31300 35300 37160 31350 36360 32700 32710 39860 38280 39500 42420 43300 30040 30080 32560 31080 32540 30110 30020 30030 30070 30230 30500 30600 31030 32930 33640 34260 36050 36290 36930 39550 43610 43840 44790 30020 :30010 :32680 32310 :32350 :30190 :34790 :34790 :30070 30100 32560 :32580 30060 33420 33420 40820 36800 32310 30550 30520 30130 30060 35310 32550 30040 30310 30160 32590 39300 32460 32490 32550 35800 3258032570 These ports made into a range by east so thank you to them They have a brilliant guide on these forums i recken you guys read it I think its the best one Please if you found this helpful please vote this thread was started over a year ago and we are still have no clue if there gonna bring it back SORRY IF I DOUBLE POSTED A FEW PORTS TWICE BUT I HAVENT HAD TIME TO EDIT THIE LIST YET BTW ANY PORTS LISTED BELOW HERE ARE FOR OLDER COD But you can still see how the people use traffick prortization correctly you just input your ports instead of the outdated ones The Various ports you listed at the bottom, was the source port for them ports always 3074? Link to comment Share on other sites More sharing options...
Infoseye Posted May 10, 2020 Share Posted May 10, 2020 On 4/19/2020 at 4:47 PM, kinel said: To get the best hit reg hit detection You wanna use traffi priortozation in the qos settings You want to put these in the traffic priotization Rule 1 source start 3074 end 3075 destination start 30000 end 45000 udp protocol Rule 2 source start 30000 end 45000 destination start 3074 end3075 udp protocol These other rules are optional Rule 3 source start 3074 end 3075 destination start 3100 end 3500 udp protocol Rule 4 source start 3100 end 3500 destination start 3074 end 3075 udp protocol Rule 5 source start 3074end 3075 destination start50000 end 65535 tcp Rule 6 source start 50000 end 65535 destination start 3074 end 3075 You can try these this is for both xbox and ps4 as you never mentioned what you play on Also i would disable classified games in traffic priotization I hope this help On 12/17/2019 at 7:31 AM, kinel said: All you need to do is put these ports into taffic proirtization Rule1 source start 3074 3075 end destination 30000 45000 udp Rule 2 start source 30000 45000 end destination 3074 3075 udp These ports you put in will make you hit detection briliant Thats The simplest way to explain it This guide was made a long time ago for bo4 Thats why its confusing sorry But you could use the ports i posted here instesd of the old ones But throughout this thread users here gave some great helpful advice and shown details on how to do it as well East on these forum has a better guide than mine its brilliant i think if you do read it read through it all theres lots of good help from users in it A user on his guide shows a tactical nuke from using easts guide This thread was never meant as a guide The second rule doesn't seem to work, playing Ps4 Bo4-Blackout any advice. And Some times DumaOS classified games enables it self even when turned offS Classified Games Link to comment Share on other sites More sharing options...
BIG__DOG Posted May 10, 2020 Share Posted May 10, 2020 Snake Oil springs to mind. DanologyUK and starlord2687 1 1 Link to comment Share on other sites More sharing options...
Xûr Posted May 28, 2020 Share Posted May 28, 2020 On 12/17/2019 at 2:31 AM, kinel said: All you need to do is put these ports into taffic proirtization Rule1 source start 3074 3075 end destination 30000 45000 udp Rule 2 start source 30000 45000 end destination 3074 3075 udp These ports you put in will make you hit detection briliant Thats The simplest way to explain it This guide was made a long time ago for bo4 Thats why its confusing sorry But you could use the ports i posted here instesd of the old ones But throughout this thread users here gave some great helpful advice and shown details on how to do it as well East on these forum has a better guide than mine its brilliant i think if you do read it read through it all theres lots of good help from users in it A user on his guide shows a tactical nuke from using easts guide This thread was never meant as a guide hi, this work for console? ps4? Link to comment Share on other sites More sharing options...
iCreats Posted May 29, 2020 Share Posted May 29, 2020 On 4/19/2020 at 11:47 AM, kinel said: To get the best hit reg hit detection You wanna use traffi priortozation in the qos settings You want to put these in the traffic priotization Rule 1 source start 3074 end 3075 destination start 30000 end 45000 udp protocol Rule 2 source start 30000 end 45000 destination start 3074 end3075 udp protocol These other rules are optional Rule 3 source start 3074 end 3075 destination start 3100 end 3500 udp protocol Rule 4 source start 3100 end 3500 destination start 3074 end 3075 udp protocol Rule 5 source start 3074end 3075 destination start50000 end 65535 tcp Rule 6 source start 50000 end 65535 destination start 3074 end 3075 You can try these this is for both xbox and ps4 as you never mentioned what you play on Also i would disable classified games in traffic priotization I hope this help Dude, you just saved my life ! Thank you so much ! Since the beginning i through my Netduma was useless on CoD MW. I live in Guadeloupe (West Indies) and it's hard for us to found perfect lobbies, so i've add your settings in trafic prioritization and the hit detection is almost perfect, on multiplayer and even on Warzone ! For these who's experimenting lags, you have to try this ! Link to comment Share on other sites More sharing options...
kinel Posted May 30, 2020 Author Share Posted May 30, 2020 On 5/7/2020 at 4:55 PM, Sable said: The Various ports you listed at the bottom, was the source port for them ports always 3074? Yeh the source ports was always 3074 Sorry i havent been viewing this topic in ages lol sorry i thought the thread was dead Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now