Netduma Fraser

As above I believe those are the correct specs.

Perseguiré a Alex para que haga esto.

Thanks for this, I'll have a look through your tests and get back to you. We are still improving auto setup so it may not always provide the best results.

ja tut es

I can't see what the service you used is, are you using any internet apps on the TV at the time?

I'd suggest reupgrading the firmware using the TFTP method, this bypasses the boot process and any issues there then once done do a factory reset for the freshest install possible: https://kb.netgear.com/000059634/How-do-I-upload-firmware-to-my-NETGEAR-router-using-TFTP-from-the-Microsoft-Windows-Command-Prompt?article=000059634 and see if it works after that. If you reboot by unplugging the router without having done a software reboot (which acts as a hard save) then it could wipe settings.

Wir befürworten die Umgehung von SBMM nicht und geben keine Informationen dazu, wie dies zu bewerkstelligen ist, da dies dem Zweck des Routers widerspricht. In den Dateien selbst ist das Land angegeben, z.B. Aus = Australien usw. Wir empfehlen im Allgemeinen nicht, ein VPN für Spiele zu verwenden, da es die Latenz erhöht.

You are on an old version so upgrade to the latest: https://forum.netduma.com/topic/50710-new-r2-firmware-33280/ and see whether that resolves the issue.

The R2 is ahead in software, that's where a lot of people are annoyed because the XR platforms are behind in that sense. There isn't much I can say, I do agree it has been far too long for an update and I know better than to provide an ETA based on current information that may change again closer to the time.

Could you provide a log file from the System Information page when the disconnects happen please? That should give me an indication of what may be happening. How often is it occurring?

Interesting, could you provide a screenshot of your QoS page please?

Hallo, Sie müssen im Moment das erweiterte Setup verwenden, indem Sie den Inhalt der bereitgestellten OpenVPN-Konfigurationsdateien kopieren und einfügen. Dann sollten Sie in der Lage sein, eine Verbindung herzustellen.

Does the message appear when accessing a page or when trying to change a setting? What firmware version are you on?

As above there isn't a one size fits all scenario, best settings for someone else may be terrible for you and vice versa. Best to experiment and see what works best for you. You can enable Classified Games it will cover most of your gaming needs. Gaming/Voice is to be used if the device you're playing on is on WiFi, otherwise for wired devices select normal.

The XR routers are sensitive in what they report as a DoS attack and actually just show connections you've made. For example, from that snippet I can see you've had a connection with Facebook, Google & Amazon. The fact you're getting that when you try to login suggests someone is attempting and failing to login to the router, is it possible someone in your household may be trying to gain access to get around a Traffic Controller rule for example?

Added, you can find it here: https://forum.netduma.com/forum/145-nighthawk-pro-gaming-beta/

Hello, welcome to the forum! Glad to hear Tray was able to help you, any other questions do let us know!

The video is how you would do it but other devices will then be limited to the allocation they have so there is no way to specifically limit a few devices while keeping other devices receiving max speeds currently.

So you named your PC PlayStation and it's appearing offline when you're online? Check the IP on the PC itself, does it match the IP of the device you think it is on the Device Manager?

Brilliant to hear that, thanks for the update, happy gaming!

Hello, welcome to the forum! We never give an ETA on releases because they're always subject to change. For example we'll have a new version available and it'll look good going through testing so we could give an ETA then something is found that needs to be fixed, then you have the dev time to resolve it then go through testing again etc.

On devices themselves they will show the router LAN IP as the DNS address, your DNS change does not affect this, however the device will be using the DNS you have set on the router. It is normal and expected behavior.

Welcome to the forum! Sorry to hear you're having this issue, are other devices having this issue or just the PC? Have you disabled DHCP on the router by any chance?

We're receiving another build this week so we'll test that and it will then depend on how well that goes as to what happens, either we can then prep for release or we/NG will need to fix anything that has found

Todavía no lo hemos hecho, lo he pasado, así que espero que mañana.