Netduma Fraser

What do you mean you can't reset it exactly? In what way do you think it is bricked? For the 1000 you can just put it in AP mode if you just want to utilize the WiFi.

Could you provide a screenshot of the QoS page please?

Hello, welcome to the forum! You mentioned it happened recently, was there anything you changed around that time? What firmware version are you on currently? Do you use IPv6, VLAN or PPPoE?

@xR1CKJAM3Zxwe're aware of that issue and will get it resolved, glad to hear that it's working well for you otherwise!

Anything changed settings wise, physically with the router/devices at all in that 9 hour period?

Parece que es posible que hayas habilitado el filtro geográfico después de iniciar el juego. Prueba esto: Salga de la aplicación/juego/cliente por completo Eliminar dispositivo del Geo-Filtro Resincronizar desde el menú Geo-Filter Map Vuelva a agregar el dispositivo al Geo-Filtro con la opción manual Configura el Geo-Filtro como quieras Espera 2 minutos Iniciar aplicación/juego/cliente Entonces mira si funciona mejor.

That sounds about right!

If you haven't changed any QoS settings that would be limiting the amount of bandwidth you have then that is just the bandwidth it wants, you can't make it use more and actually it's more than enough, it shouldn't cause you any gameplay issues.

If you make a new topic we can help you there

As above are you able to try accessing the router via ethernet to see if you can complete the wizard? What firmware were you on and what did you upgrade to?

Okay thank you, I'll pass it onto the team to see if they can reproduce it.

What is the actual Android version on the Moto? (You should be able to find this in Settings on the phone) As it may be that the app is not working well with a much newer version and we'll have to test it. We do have a new app version coming out fairly soon which also may help.

Welcome to the forum! There isn't much to go on here, did this happen after changing a setting for example? Are you experiencing a change in gameplay? Technically, the game requires very little bandwidth, less than is pictured there and having 4k doesn't mean the game will use it.

Have a quick run through of this to double check and if not let me know and there might be an extra setting or two we can change. https://support.netduma.com/en/support/solutions/articles/16000076586-dumaos-optimal-settings-guide-maximum-bandwidth-speeds

Estoy esperando una respuesta y cuando sepa lo sabrás.

That's strange, usually the issue is allowing it to auto select the router you're using, selecting it manually then makes it work

For the most compatibility yes that's what I'd recommend

If you're gaming on a PC then set it as that yes, otherwise no need for the device you're viewing with

Are you having the same issue on a PC at all? What version of Android is it?

Maybe a DPI update caused it so disable Adblocker, if that still doesn't work disable QoS fully from the Congestion Control menu and then try

Is there anything that changed coinciding with when that happened? Game/router update/settings change etc?

Well done on getting it sorted! Yes you should see the devices using data but won't necessarily see the AP using data as it's essentially passing all the data right through to the devices.

You'd need to reconnect the device to the other WiFi network for the first R2 and then probably reboot the device you're connecting with, it's not going to work well if you're trying to use it as a WiFi repeater but using separately should be fine.

If you disable Adblocker on the R2 does that then allow you to login?

You have access already if you have a look and can be found here: https://forum.netduma.com/forum/144-netduma-r2-early-access/ no emails are sent for it, you'd just see the new section on the forum when you're approved. Upgrade to that and see if you notice an improvement with CoD.