Netduma Fraser

As a test, please make a rule on Traffic Prioritization for the test PC: Source 1-65535 Destination 1-65535 Protocol TCP/UDP and then do speedtest.net via ethernet, what do you get?

I've chased the dev on this. Thanks for the info, did you have this on the previous beta version at all? Has anything else in your network changed? We're still looking into that unfortunately.

You don't need to add it but if you cover the server with your Geo-Filter radius then it should allow you to force the server

He respondido a tu tema

Set the IP statically in the R2 WAN Settings as well please and also change the DHCP hours in DHCP settings to 168. Reboot the router from the interface once you've applied both. Settings for static will be: IP 10.0.0.106 Subnet 255.255.255.0 Gateway/router 10.0.0.1

Gotcha, thanks for the feedback! You can disable Ads by unticking the checkbox next to it in the lists panel. Is it paused on your PC but not the phone? What happens when you try to set automatic width?

How did you set the static IP address exactly, did you use the WAN IP from the System Information page?

I can see you're using IPv6 now, if you disable this do you see the same issue?

Yes please

That's certainly an option but you could have the same issue on a previous version. What is the model of the modem/router the R2 is connected to? Are you able to set a static/reserved address for the R2 on the modem? In theory this should help to resolve the issue.

As in it says QoS disabled on each of the panels?

It's possible that they are mislocated, or as they're different games it could just be that's the lowest you can get to those particular servers. For example I live quite close to London but my ping to the UK server is about 20ms for MW. If you put the IPs in the form as mislocated we can double check and move them if needed.

¡Hola! Gracias por hacérmelo saber, le pediré al equipo que revise el formulario y envíe una actualización.

@Killerelite06 thank you for the feedback, to answer some of your points: Thanks for letting me know, I will raise a request to have PPPoE as an option for the setup wizard. Could you let me know the WiFi password you were trying to use or the format of the password e.g. letters, numbers, symbols etc. I think SA only has 2 servers so that could be why, I imagine that the whole of Africa for the most part are forced onto those servers so they may be under load. We'll be doing a Ping Heatmap update next week and then the servers should reappear there DSLReports doesn't play nice with Traffic Prioritization which is why the results can be off, if CB says you're good then that's great! You should be able to do that if you enter it as a domain. Interesting, what do you get if you select a custom channel? Glad to hear it! I believe on the NG routers UPnP works but doesn't always show them as entries

Creo que puede que le falte un servidor de autenticación, debería haber un ícono de reproductor en el este de los EE. UU. Que aparece; intente permitir esto cuando lo vea y luego vea si funciona mejor

En su segunda captura de pantalla que es correcta, ya que no ha configurado el Geo-Filter para permitir un rango, debe hacer esto antes de comenzar el juego.

Cuando intentas buscar un juego con el filtro geográfico habilitado, ¿ves algo que aparece bloqueado en el mapa? Si es así, ¿puede proporcionarme la identificación y el ping, por favor?

No, está bien, ¿dónde se encuentra realmente?

Deshabilite el modo de filtrado en el filtro geográfico, pero observe lo que sucede y dónde lo ubica para obtener los servidores de ping más bajos que observó. Una vez que haya identificado esto, habilite el Modo de filtrado y coloque su radio / polígono sobre esa área y vea si el ping permanece igual y si puede obtenerlo de manera consistente. - Disable Filtering Mode on the Geo-Filter but watch what happens and where it places you to get the lowest ping servers you observed. Once you have identified this, then enable Filtering Mode and place your radius/polygon over that area and see if the ping stays the same and whether you can get it consistently.

Good thought but then if QoS was fully disabled on DumaOS that would make it work but it doesn't seem to so may not be as simple unfortunately

How often is that happening while you're staying on the page? Which router? There are no settings around the interface login

Vaya a la página de Información del sistema en el R2 y copie la IP WAN, que es la IP para ingresar en la DMZ en Ubee

Te sugiero que vuelvas a cambiar esa IP. Ubee ya le habría asignado al R2 una IP en el rango 192.168.0.x que habría encontrado en la página de Información del sistema

@Private Greenie have you put any devices in the DMZ or anything like that at all? Have you disabled any of the protection options in WAN Settings? I think the Geo-Filter entries/settings are fine, of course you'll need to enable Filtering Mode there.

Toma la IP de R2 WAN de la página de Información del sistema y la coloca en la función Ubee DMZ, probablemente ubicada en la configuración de Firewall, Seguridad o LAN