-
Posts
83947 -
Joined
-
Days Won
1728
Everything posted by Netduma Fraser
-
So you could delete it after a reboot but it still said you had a device added? We are aware of it
-
Are you assigning the IPs within the DHCP range or outside? - Which one is it?
-
Right-click on the Network/WiFi Windows Network Icon on the PC on the bottom-right hand side of your screen Open Network and Sharing Center. Click Change Adapter Settings. Right-click your connection and go to Properties. Uncheck the box next to Internet Protocol Version 6 (TCP/IPv6) to disable it. Then try accessing the interface and see if it works please.
-
Yes that's correct, although it looks as though it was working with DumaOS Classified Games which does cover consoles also
-
Unplug the router from power for 10 minutes, plug in, then wait 4 minutes before accessing and see if it works then please.
-
Are you assigning the IPs within the DHCP range or outside? Did you restart the WiFi devices?
-
It does appear to be a Poland server, if you open command prompt on your PC and type ping 64.176.64.254 or tracert 64.176.64.254 what ping do you get?
-
NEW XR500 BETA FIRMWARE: 3.3.535
Netduma Fraser replied to Netduma Lew's topic in NETGEAR Nighthawk Support (XR range)
Good to hear, try it on Always as well -
Geo-Filter attaches to Party Host
Netduma Fraser replied to Luis Gomes's topic in Netduma R3 Support
You should definitely be the party leader if you have the Geo-Filter enabled. It is possible that with Geo-Latency enabled that you could still filter without being the leader but I would still advise being the leader -
I can tell you HybridVPN will be in the next version and there will be more fixes/improvements, including for the issue with accessing the interface
-
You'd need to check the box manual, we have no idea what may be required on third party hardware
-
Give the router a reboot, then when you check are you able to delete it?
-
Could you provide the ID of the server when you connect to it please? Use the Simple mode to filter instead of the custom drawing filter and it should more consistently get you games within your radius.
-
Try in increments of 5% so 95%, 85% etc, as I mentioned they don't need to be the same values as well, you'll just need to get the graph looking like the graph from your first picture - it's not going to be a flat line because your base ping/connection isn't a flat line
-
Grab the logs and that'll help! Also though, extend the DHCP lease time and give a reserved IP to the device and see if that helps
-
We've got some fixes coming for this in the next update (hopefully!), so won't be long for that update, perhaps sometime next week
-
But what does the Geo-Filter ping say for that server, is it 45ms as it is in the game?
-
It won't always be able to ping every server unfortunately but some good advice above, with the interface open it is using resources so may provide an extra boost when closed
-
This hasn't been reported to us so it's not being looked into, if you reboot after setting it on .41 does it work and can you access?
-
I don't think you need to turn off the XR1000 as the settings would be applying to the XR as well but that's the best result you can get so you're good!
-
QoS and WiFI
Netduma Fraser replied to fletcherjames1's topic in NETGEAR Nighthawk Support (XR range)
I think it's the last thing before a release so if it's sorted you'll know!