DanologyUK Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 1:58 AM, xBuTcHeRx said: Thank you ND Team. I'll give my feedback regarding CPU Spike. Hopefully this fixes geo filter too. MW3 Is sooo strict. Expand Looking at the change log, there is no mention of geo filter changes. iOrcus 1 Link to comment Share on other sites More sharing options...
boothay Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 6:11 AM, cljackhammer said: Firmware is working well. Expand Why is "Syn Flood Protection" Off? Also........how do i clear the R3's cache Link to comment Share on other sites More sharing options...
TG3NOC1D3 Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 11:03 AM, Netduma Fraser said: The link was for you, everything else was directed at others. Nope, not in the change log. Glad it's working better for you though. So it doesn't say 3 list active at all? I assume you waited to confirm the update did complete properly before resetting? We didn't make any specific changes to Geo. Might be worth you re-upgrading again to see if that irons out your issues. Do you see anything blocked on the map when you launch it and that happens? Reboot the router then do an update and it'll work Please read the entirety of the first post in this topic. Expand It does not, after upgrading I waited 10 minutes before factory reset. I'll downgrade and then upgrade again without a factory this time and see if the issue persists. Link to comment Share on other sites More sharing options...
cljackhammer Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 5:05 PM, boothay said: Why is "Syn Flood Protection" Off? Also........how do i clear the R3's cache Expand I only use the R3 for gaming devices on a separate VLAN behind a opnsense router. Link to comment Share on other sites More sharing options...
SamT98 Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 3:33 AM, TG3NOC1D3 said: Already turned them off and same thing. I might factory reset again as my hit detection is abysmal and it is taking forever to kill anything as well. So far, I'm not impressed with this update. Seems to have broken more than it fixed. Geo-filtering works but it tries a bazillion times to connect to servers outside my filter before grabbing some inside. If resetting works I'll be pulling this router from my network as I need vpn for my YouTubeTV stuff and I refuse to play with this terrible hit detection. Expand It’s not just me then, fyi I done a full factory reset made 0 difference in gameplay at all. The only thing I can see that this patch has done in a positive way is fix the cpu2 topping out at idle. Like you said it’s broken more than it’s fixed. For example in .16 the geo filter searching bug outside your radius was there but fixed during .23 but now has reappeared in .40. I’ve now done a full reset and reverted back to .23 gameplay much better again! iOrcus 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 28, 2024 Author Administrators Share Posted January 28, 2024 On 1/28/2024 at 3:28 PM, Stilts29 said: The device in question is wirelessly connected directly to the R3 Expand It's IP/MAC address may have changed potentially, it won't cause you any issues, it's purely aesthetic On 1/28/2024 at 3:38 PM, euphidra said: @Netduma Fraser Hi Fraser, after I restart the router the smartphone's wifi works but after a while it works but writes connected without internet. I don't know if it's a Samsung bug after the ONE UI 6 update. I'll send you the two photos. The icon adds an exclamation point when connected without internet. I enabled ipv6 lan and wan after update 4.0.40 without any problem on the TIM network in PPPOE. Expand The same issue you were having before yes? We'll look into it. On 1/28/2024 at 4:50 PM, He4DHuNt3r_XIM said: @Netduma Fraser For some reason, my upload speed is low with SmartBOOST disabled with .40 About 70Mbps When I enabled SmartBOOST, it's over 800 Mbps Expand Interesting, how do you have Congestion Control set exactly? On 1/28/2024 at 5:19 PM, TG3NOC1D3 said: It does not, after upgrading I waited 10 minutes before factory reset. I'll downgrade and then upgrade again without a factory this time and see if the issue persists. Expand Keep us posted! On 1/28/2024 at 6:36 PM, SamT98 said: It’s not just me then, fyi I done a full factory reset made 0 difference in gameplay at all. The only thing I can see that this patch has done in a positive way is fix the cpu2 topping out at idle. Like you said it’s broken more than it’s fixed. For example in .16 the geo filter searching bug outside your radius was there but fixed during .23 but now has reappeared in .40. I’ve now done a full reset and reverted back to .23 gameplay much better again! Expand The firmware wasn't made to affect gameplay specifically but to fix the bugs like you mentioned. If the previous version works best for you that's great. More firmware will be coming. Link to comment Share on other sites More sharing options...
euphidra Posted January 28, 2024 Share Posted January 28, 2024 @Netduma Fraser Yes. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Sentinel82 Posted January 28, 2024 Share Posted January 28, 2024 Hi Fraser No connection After upgrading to v.4 factory reset 3 times and nothing working. I’m back to v.23 for now. Link to comment Share on other sites More sharing options...
He4DHuNt3r_XIM Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 7:15 PM, Netduma Fraser said: Interesting, how do you have Congestion Control set exactly? Expand Default settings Auto Link to comment Share on other sites More sharing options...
JasonKnight Posted January 28, 2024 Share Posted January 28, 2024 Not sure why but I've been getting VERY bad latency spikes in my games. In fortnite I keep getting the yellow and red x now. My settings are just gaming selected as my only priority. Upnp enabled, my modem is in modem mode note I've also tried it in router mode with my ps5 in the dmz and got same results. And I've tried every possible option for Congestion Control that I can think. Anyone know of a solution. Link to comment Share on other sites More sharing options...
Movement Posted January 28, 2024 Share Posted January 28, 2024 Can I please link to download new update ? Disrek 1 Link to comment Share on other sites More sharing options...
TG3NOC1D3 Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 9:12 PM, Movement said: Can I please link to download new update ? Expand It's on the first page of this thread, you have to click to show it on the icon below the patch notes. Disrek 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 28, 2024 Author Administrators Share Posted January 28, 2024 On 1/28/2024 at 8:14 PM, Sentinel82 said: Hi Fraser No connection After upgrading to v.4 factory reset 3 times and nothing working. I’m back to v.23 for now. Expand Upgrade again, then reboot the modem, wait 2 minutes, reboot the R3, wait 4 minutes and see if you get internet then. On 1/28/2024 at 8:34 PM, He4DHuNt3r_XIM said: Default settings Auto Expand Do you have speed test bypass enabled/disabled? On 1/28/2024 at 9:10 PM, JasonKnight said: Not sure why but I've been getting VERY bad latency spikes in my games. In fortnite I keep getting the yellow and red x now. My settings are just gaming selected as my only priority. Upnp enabled, my modem is in modem mode note I've also tried it in router mode with my ps5 in the dmz and got same results. And I've tried every possible option for Congestion Control that I can think. Anyone know of a solution. Expand There is an issue on PC & Xbox that we know of for Fortnite preventing logging into the game so it could be related potentially, do you experience it on any other game? Sentinel82 1 Link to comment Share on other sites More sharing options...
Damg31 Posted January 28, 2024 Share Posted January 28, 2024 I uploaded the new version and from that moment, when entering R3 it says internal server error in the application, and I have to turn off and on the R3 to make it work!! What do you have to do, to fix that problem? Link to comment Share on other sites More sharing options...
JasonKnight Posted January 28, 2024 Share Posted January 28, 2024 On 1/28/2024 at 10:39 PM, Netduma Fraser said: Upgrade again, then reboot the modem, wait 2 minutes, reboot the R3, wait 4 minutes and see if you get internet then. Do you have speed test bypass enabled/disabled? There is an issue on PC & Xbox that we know of for Fortnite preventing logging into the game so it could be related potentially, do you experience it on any other game? Expand Yes in all the multiplayer games i play atm. COD, Battlefield, fortnite. I'm on PS5 BTW. Link to comment Share on other sites More sharing options...
cedric108 Posted January 28, 2024 Share Posted January 28, 2024 Hello, I have a question. What’s the expected behavior of Geo-Latency Mode? I have been playing with Geo-Latency off since 4.0.20, after upgrading to .40, I want to do some tests. Let’s say I am from Europe, with Ping Assist off, Strict Mode on. If I put the filter circle in the US, am I going to only get US lobbies with Geo Latency on? If not, how does Geo Latency work? Link to comment Share on other sites More sharing options...
JR_ Posted January 28, 2024 Share Posted January 28, 2024 Getting some absolutely dire download 'speeds' from Steam after updating I typically got ~90-100mb/s on my isp router Link to comment Share on other sites More sharing options...
JR_ Posted January 29, 2024 Share Posted January 29, 2024 Yet another issue, I straight up cannot connect to the router now - last update it would break and require a reboot, but it would at least get to the router web ui, now it's just failing to connect entirely. Going to try a hard reboot. edit: rebooting let me connect, downloads were still glacial though - I turned smartboost on and it sped up, I've had it disabled previously - note my peak speed here is still ~30-40% slower than my previous peaks edit again: It's doing this consistently, it starts out fast, then goes down over time until it stalls out almost completely - also note the identical peak speed, as though it's clamped: Link to comment Share on other sites More sharing options...
Hotchin88 Posted January 29, 2024 Share Posted January 29, 2024 Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. crunkjuice1 1 Link to comment Share on other sites More sharing options...
therealzome Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 3:31 AM, Hotchin88 said: Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. Expand switched back to the XR1000 today. too many issues with the R3 after the first two months, and new ones unfortunately seem to pop up with every new patch. Will set it back up in a few months after they iron out the bugs Hotchin88, 999Call and Joel M 3 Link to comment Share on other sites More sharing options...
cedric108 Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 4:37 AM, therealzome said: switched back to the XR1000 today. too many issues with the R3 after the first two months, and new ones unfortunately seem to pop up with every new patch. Will set it back up in a few months after they iron out the bugs Expand Is the XR1000 more stable? I've come across some Reddit posts expressing concerns about the XR1000, particularly regarding QoS and Congestion Control. Personally, I don't need these two features. If the Geo-Filter and the router's basic features are stable and bug-free, I am also interested in temporarily switching to the XR1000. I will, of course, continue using the R3 in parallel and assist the ND team in improving the firmware. Link to comment Share on other sites More sharing options...
markandmark Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 3:31 AM, Hotchin88 said: Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. Expand People with problems will report these problems, people without problems have no need to do that, this might be the reason why it looks like it is a total mess. Because of your post I will share my experiences with this router so far. The router was already running "good enough" for me on the last firmware, I had to change a couple of things in the settings. I installed this new firmware this morning, reset everything to factory default. So far everything runs smoothly without changing anything. I did disable WiFi, but that is because I have my accespoints throughout the house. I was never tempted to switch back to my old (R2) router because the troubles I had were manageable. I'm not saying the people complaining in here have no reason to do this. Clearly there are problems for them! With this post I just want to make clear that there are people happy with the hardware and software, And I'm sure future updates will only make this a better product! Before this update my Xbox showed NAT as moderate. After de update it shows OPEN! I'm happy with this router, but I knew I was jumping on the train early. I know that with early releases there will always be unwanted bugs. This team seems to be on top of this and are working hard to tackle these bugs. iOrcus, Yoda and Miiiithraaks 2 1 Link to comment Share on other sites More sharing options...
Yoda Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 3:31 AM, Hotchin88 said: Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. Expand Depends on your setup etc. We’re seeing posts mainly here of people that need assistance. I get that, if it’s not working for you then it’s a little frustrating, especially if you have a set up in family house with wife and kids on your back about the connection. The flip side of that coin is when it does work. I have two R3’s (one launch and one received a week or two later). These R3’s are at different locations (with FTTP and FTTC connections). I split my week between the two sites. Both work on the whole on .40 and I’ve had some absolutely brilliant hit reg on both R3’s playing BF2042. The main issue I have is with both R3s is Wifi range. Reaching devices like the Ring doorbell for example. Netduma are aware and are taking a 👀. I’m confident things will get resolved. There will be more firmware updates. Resolving issues a step at a time. markandmark and titofuenla 2 Link to comment Share on other sites More sharing options...
Stilts29 Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 3:31 AM, Hotchin88 said: Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. Expand Hi @Hotchin88, Although the forums may not reflect it, there are a lot of satisfied owners, myself included. Yes there are some issues which some users are facing which are important to them but they will get fixed. For gaming, and lets face it that's what we got the R3 for wasn't it, the experience is awesome now. When it arrives, put release .40 on it, do a factory reset and configure it as you like it. Then try some games out, I'm sure you will like it. If not you have the option to return. markandmark, Miiiithraaks, DOGGAVELI and 1 other 4 Link to comment Share on other sites More sharing options...
DOGGAVELI Posted January 29, 2024 Share Posted January 29, 2024 On 1/29/2024 at 3:31 AM, Hotchin88 said: Recently purchased the R3, and it should arrive tomorrow. Does anyone's R3 actually work fine ? Im a bit concerned by all the issues im seeing. Expand Some bugs but it will be resolved and you’ve made a great purchase 😀👊🏻 Link to comment Share on other sites More sharing options...
Recommended Posts
Posted by Netduma Alex,
0 reactions
Go to this post