-
Posts
83867 -
Joined
-
Days Won
1723
Everything posted by Netduma Fraser
-
It would be tomorrow now so quite possibly when you're asleep, you don't need to be around for us to do so as long as remote support is enabled prior to that. We can do that yes.
- 43 replies
-
- dns
- resolution
-
(and 2 more)
Tagged with:
-
We believe we have fixed this issue in the next firmware but for the moment set the DHCP range to start at .50, then assign reserved IP addresses to devices between .2 & .49 so they're out of the DHCP range, apply, reboot from the interface, wait 2 minutes and see if that stops the disconnects.
-
Click reset at the bottom there
-
Reset bandwidth allocation, gaming uses less than 1Mbps in most cases so 90% is unneeded, then drop 10% on CC retest, see what the ping is like, you want to get it as close to the Ping Test results as possible. So change percentage, test, change, test etc
-
That's all you need to do, it's important to saturate the connection at the same time. Once you've changed the percentage wait 30 seconds to see how it has affected the ping, if it's not good enough then move on. I'd suggest trying intervals of 10 to start with.
-
It may take a few days for the spikes to settle but that's a good start! We're still improving the Benchmark results on the XR routers so I wouldn't worry too much about that currently and go on feel or use PingPlotter, saturate your connection with downloads/streams etc and experiment with CC % to see what brings the ping down as much as possible.
-
It has been awhile since new firmware has been available, shouldn't be much longer before another version is released. Apart from the UPnP issue which is more visual there hasn't been many recurring themes from what I can see. If you're having an issue please make a topic and we'll be happy to help.
-
Can you provide a screenshot of the QoS page as you have it set currently please?
-
Okay might be fixed in a non released version then as I know it has been fixed, in the meantime I would advise you look up the channel/WiFi requirements for the US and choose a region that has those same requirements
-
What firmware version are you on currently? I believe this was fixed in the latest .394
-
Can you provide a screenshot of a completed Benchmark test please and a screenshot of the QoS page as you have it set currently
-
I think that's a good idea, the baseline is quite spikey so once that is resolved your overall performance should improve. In WAN Settings change NAT to Open and see if that resolves the issue with the cameras
-
Did you enable the option on guest WiFi for the devices to be able to interact with your network? Under what conditions were the PingPlotter tests done?
-
Add “Halo Infinite” severs and geo filtering
Netduma Fraser replied to Yale king's topic in New Games for the Geo-Filter
I think a good test to see if it is your settings is to play during off peak times when the servers are generally under less load then play with and without and see what the experience is like. -
R2 loses all connection periodically, requires unplug
Netduma Fraser replied to The0dark0one's topic in Netduma R2 Support
Great to hear that and thank you for the update! -
That is all that is needed thank you, Liam will have to connect on Tuesday now, no need to do anything on your side or be by the router
- 43 replies
-
- dns
- resolution
-
(and 2 more)
Tagged with:
-
Did you do the PingPlotter test again with the new modem? Try making a guest 2.4GHz just for the smart devices and see if they're able to connect to that
-
Hybrid VPN for Warzone no longer connecting via OPEN VPN
Netduma Fraser replied to Paul Maos's topic in Netduma R2 Support
That's port forwarding, follow the specific steps here: https://forum.netduma.com/topic/38675-hybrid-vpn-for-warzone-no-longer-connecting-via-open-vpn/?do=findComment&comment=332646- 136 replies
-
- warzone
- hybrid vpn
-
(and 2 more)
Tagged with:
-
Hybrid VPN for Warzone no longer connecting via OPEN VPN
Netduma Fraser replied to Paul Maos's topic in Netduma R2 Support
From the screenshot put the source ports in start and end and then do the same for the destination as well- 136 replies
-
- warzone
- hybrid vpn
-
(and 2 more)
Tagged with:
-
Error on WIFI channel and WIFI suddenly stop working.
Netduma Fraser replied to thewilloxdiaz's topic in Netduma R1 Support
Now you have access again, try this again: While connected via ethernet, disable WiFi entirely, reboot the router from the interface, wait 2 minutes, access, enable WiFi, change the channel, apply, reboot from the interface, wait 2 minutes then see if it's more stable from then on. Also, set reserved IPs for all devices between .2 - .99 and then reboot from the interface and wait 2 minutes -
Add “Halo Infinite” severs and geo filtering
Netduma Fraser replied to Yale king's topic in New Games for the Geo-Filter
I would suggest so yes as there is no need to prioritize twice -
All servers appear to be pinging correctly so I don't believe so - have new servers been brought online/offline that we need to check for?
-
Add “Halo Infinite” severs and geo filtering
Netduma Fraser replied to Yale king's topic in New Games for the Geo-Filter
Yes that would be 6 rules but you will likely not need the 88 or 500 rule. If you're playing over WiFi then Gaming/Voice, if playing over ethernet pick Normal - regardless I would suggest enabling Apply to WAN as if your ISP supports priority tags you may have an improved performance. No need to reboot, they will work when the console goes on. It is quite possible that not all the rules will appear to be used - it depends specifically on what they use during a game and what may be used occassionally.