Netduma Fraser

Puede usar la asignación de ancho de banda para sortear eso, otorgar un pequeño porcentaje al dispositivo y luego deshabilitar Share Excess para cargar y se limitará a esa velocidad

Haga que sus porcentajes de control de congestión sean muy bajos: la gente lo recomienda

Con sus velocidades, es poco probable que experimente congestión local, en cuyo caso experimentar con porcentajes puede no hacer mucha diferencia, pero podría intentar acelerar para reducir la velocidad. Algunos creen que este contraataque retrasa la compensación.

Con sus velocidades, es poco probable que experimente congestión local, en cuyo caso experimentar con porcentajes puede no hacer mucha diferencia, pero podría intentar acelerar para reducir la velocidad. Algunos creen que este contraataque retrasa la compensación. Podemos continuar en su tema: https://forum.netduma.com/topic/39188-qos-priorización-de-paquetes-call-of-duty-en-consola/

Podemos continuar con su tema si tiene más problemas. Sin embargo, una actualización no solo reducirá su ping a los servidores

La actualización fue una actualización de seguridad y mantenimiento de Netgear, no hay cambios por nuestra parte. Si sigue lo anterior, podemos investigar más sus problemas.

Disabling IPv6 was just for us to get access to the router, we've got that sorted now so no need to change IPv6 again. That is something we're away of, it's a normal log on that version and will be fixed.

On PingPlotter the main thing to focus on is the bottom graph and you're not receiving packet loss there and your connection is quite stable!

Thanks for the information, lets get remote logging sorted, could you disable IPv6 in LAN/WAN then enable remote support and we can get that done for you tomorrow

Si esos son los servidores más cercanos, es poco probable que vea una mejora en el ping, pero el enrutador le permitirá tener una experiencia consistente y evitará conectarse a servidores muy lejanos o experimentar una congestión local que podría afectarlo negativamente.

Le sugiero que use el Geo-Filter, ya que es una parte importante para obtener una buena experiencia de juego y podría ayudarlo a obtener servidores de ping más bajos que lo ayudarían a tener un mejor juego.

¿Cuáles son los problemas que estás teniendo exactamente? ¿Tienes retraso? ¿Está utilizando el Geo-Filtro? Si es así, ¿cuál es el ping promedio que estás viendo en el Geo-Filter cuando juegas?

I think you'll have to try another reboot from the interface but wait 2 full minutes before you try to access it and then it should work. Also disable IPv6 in LAN/WAN and disable the protection options on WAN as that may help

That message is likely occurring because you have an Adblocker on the web browser, if you disable it for the interface it should go away. I've included a picture as an example: So you can see the DHCP range starts at .100 and ends at .250 so I have clicked the reserved IP on each of my devices and given them an IP address below .100 (don't use .1 as that is the router IP)

They're independent features, unprioritized packets don't mean the same thing on both. Your connection has a little bit of packet loss, which is why you're seeing unprioritized packets on the System Information page. Your unprioritized packets represent 0.01% of your total received packets so it is nothing really, you would not notice any difference with that, it is within normal parameters so you can safely ignore it. As to why others see 0 it just depends on their ISP etc.

¿Qué configuración de QoS y Geo-Filter está usando actualmente? Sería mejor que comenzaras un nuevo tema con esa información para que podamos centrarnos en él.

Although the number seems big, in comparison to received packets it is a very minute percentage and therefore within normal parameters so nothing to worry about

Hey, welcome to the forum! In theory yes but their implementation prevents you searching if a server is blocked so it may not work. It's something we will continue to try and look at, there are a few things we're looking at specifically but it will take time, it may not even work.

Are you referring to Traffic Prioritization? If so that is quite normal, unprioritized packets is your normal traffic isn't covered by your Traffic Prioritization rule e.g. web browsing, downloading, streaming etc so absolutely nothing to worry about.

It's not been our focus for this next version as we've been really motivated to resolve the memory issue and much more general stability improvements. So the next version will be a lot better, it's unlikely those changes will have resolved that so we can look at it for the one after next.

@TigerSSorry to hear about the fees, unfortunately customs fees aren't something we can control. It was likely opened by customs to check the contents, we always package it so you'll be the first to open it. The power supply requires a fixed voltage but accepts a varied current so you're absolutely fine to use it. Yes the vents are on the underside so it's not advised to put it on a carpet but you can put it on a table for example. That is the version it comes with and you were right to upgrade and reset on the latest!

It doesn't matter what range you set particularly, just that the reserved IPs are outside that range. If you want to use that range then ensure all devices are given a reserved IP of .100 and above

Is 1000/40Mbps your expected/paid for speeds? Your base ping is a bit spiky so that would explain the ~50ms to your closest servers, there is not much that can be done about that unfortunately as it is down to the ISP.

Could you provide a screenshot of your Connection Benchmark results please?

No need to be signed it, you can set it and forget it if that is what you would like to do. You should definitely have some low ping servers around, what is the lowest as shown by Ping Heatmap?