Netduma Fraser

¡Hola bienvenido al foro! Te he dado acceso, puedes encontrarlo aquí: https://forum.netduma.com/forum/130-dumaos-30-beta-netduma-r1/

Sorry about that, I found the issue and you should be able to post now. Make a support topic and we'll be happy to help.

I think so or your account user ID, is that the same?

Apologies for the question but did you type your username/password in correctly?

Yes we will, I've asked the team to see whether it is something they can do for one of the next updates. Could you try this one instead please? client dev tun resolv-retry infinite nobind persist-key persist-tun verb 3 remote-cert-tls server --keepalive 10 30 sndbuf 524288 rcvbuf 524288 cipher AES-256-CBC tls-cipher TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA proto udp auth-user-pass reneg-sec 0 tun-ipv6 fast-io remote-random remote gb-lon-101.mullvad.net 1301 <ca> -----BEGIN CERTIFICATE----- // Removed for pasting -----END CERTIFICATE----- </ca>

Hey, welcome to the forum! All pre-orders are due to be sent by the end of next week so it won't be too much longer.

That's great to hear, thanks for sharing the solution for you. We're investigating the issue at hand so I'm confident we'll get it resolved.

It might be the power cut briefly causing a reset, I''d see if you can get a replacement, either with the retailer you purchased from or by making a ticket with Netgear here: http://support.netgear.com/

I think we've gone through everything unfortunately yeah. We can do a replacement though and then that should work if you'd like to try that. Either way you'll need to email [email protected] with your order number, if you want the replacement then link this topic and they'll sort that out for you.

Thanks for that, can you go ahead and re-upgrade to the same firmware please and then factory reset for a fresh install and see if it still happens after that? It may not have flashed correctly prior to shipping. https://forum.netduma.com/topic/34950-new-r2-firmware-30205/

Thanks for the report, I've compiled a list of all the heatmap games that need to be updated and have passed it over to the team to update.

When set to never it does override the slider value to essentially be off so for example: 100/100Mbps 50% set to Always = ~50Mbps 50% set to Never = ~100Mbps

Thanks for that, what was the IP you gave the R2? On the System Information page does it show the same IP that you set?

Thanks for the information, on the actiontec would you be able to set a static IP for the R2 to see if it can sustain a connection? Might be to do with the actiontec DHCP release renewing.

Some devices do not like Smart Connect and are not able to seamlessly transition bands based on Bandwidth as the router does without connecting manually to a band. I would suggest making a guest WiFi for such devices and then using Smart Connect for the main WiFi so you get the best of both worlds.

Is that in router mode or have you put it in modem mode? Regardless of the way you have put it can you try the other method please and see if that works? It is a support forum so you will mainly see people with issues here, it does not represent the entirety of our customer base and is within normal levels for a consumer based product. We are working on it, it's a tough issue to pin down but it's a high focus for us. Is that all devices or wired/wireless specifically?

Could you contact Mullvad and ask them for a configuration file that will work with OpenVPN 2.3.4 please?

Hey, welcome to the forum! Sorry to hear you're having this issue. What is your exact physical setup, i.e. are you using a pure modem (no wifi) or a modem/router (wifi)?

Sorry to hear you're having this issue, have you tried the suggestions mentioned so far?

Can you try this config instead please: client dev tun proto udp remote-random remote gb-mnc-102.mullvad.net 1197 cipher AES-256-CBC resolv-retry infinite nobind persist-key persist-tun verb 3 remote-cert-tls server ping 10 ping-restart 60 sndbuf 524288 rcvbuf 524288 fast-io auth-user-pass reneg-sec 0 <ca> -----BEGIN CERTIFICATE----- MIIGIzCCBAugAwIBAgIJAK6BqXN9GHI0MA0GCSqGSIb3DQEBCwUAMIGfMQswCQYD VQQGEwJTRTERMA8GA1UECAwIR290YWxhbmQxEzARBgNVBAcMCkdvdGhlbmJ1cmcx FDASBgNVBAoMC0FtYWdpY29tIEFCMRAwDgYDVQQLDAdNdWxsdmFkMRswGQYDVQQD DBJNdWxsdmFkIFJvb3QgQ0EgdjIxIzAhBgkqhkiG9w0BCQEWFHNlY3VyaXR5QG11 bGx2YWQubmV0MB4XDTE4MTEwMjExMTYxMVoXDTI4MTAzMDExMTYxMVowgZ8xCzAJ BgNVBAYTAlNFMREwDwYDVQQIDAhHb3RhbGFuZDETMBEGA1UEBwwKR290aGVuYnVy ZzEUMBIGA1UECgwLQW1hZ2ljb20gQUIxEDAOBgNVBAsMB011bGx2YWQxGzAZBgNV BAMMEk11bGx2YWQgUm9vdCBDQSB2MjEjMCEGCSqGSIb3DQEJARYUc2VjdXJpdHlA bXVsbHZhZC5uZXQwggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoICAQCifDn7 5E/Zdx1qsy31rMEzuvbTXqZVZp4bjWbmcyyXqvnayRUHHoovG+lzc+HDL3HJV+kj xKpCMkEVWwjY159lJbQbm8kkYntBBREdzRRjjJpTb6haf/NXeOtQJ9aVlCc4dM66 bEmyAoXkzXVZTQJ8h2FE55KVxHi5Sdy4XC5zm0wPa4DPDokNp1qm3A9Xicq3Hsfl LbMZRCAGuI+Jek6caHqiKjTHtujn6Gfxv2WsZ7SjerUAk+mvBo2sfKmB7octxG7y AOFFg7YsWL0AxddBWqgq5R/1WDJ9d1Cwun9WGRRQ1TLvzF1yABUerjjKrk89RCzY ISwsKcgJPscaDqZgO6RIruY/xjuTtrnZSv+FXs+Woxf87P+QgQd76LC0MstTnys+ AfTMuMPOLy9fMfEzs3LP0Nz6v5yjhX8ff7+3UUI3IcMxCvyxdTPClY5IvFdW7CCm mLNzakmx5GCItBWg/EIg1K1SG0jU9F8vlNZUqLKz42hWy/xB5C4QYQQ9ILdu4ara PnrXnmd1D1QKVwKQ1DpWhNbpBDfE776/4xXD/tGM5O0TImp1NXul8wYsDi8g+e0p xNgY3Pahnj1yfG75Yw82spZanUH0QSNoMVMWnmV2hXGsWqypRq0pH8mPeLzeKa82 gzsAZsouRD1k8wFlYA4z9HQFxqfcntTqXuwQcQIDAQABo2AwXjAdBgNVHQ4EFgQU faEyaBpGNzsqttiSMETq+X/GJ0YwHwYDVR0jBBgwFoAUfaEyaBpGNzsqttiSMETq +X/GJ0YwCwYDVR0PBAQDAgEGMA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEL BQADggIBADH5izxu4V8Javal8EA4DxZxIHUsWCg5cuopB28PsyJYpyKipsBoI8+R XqbtrLLue4WQfNPZHLXlKi+A3GTrLdlnenYzXVipPd+n3vRZyofaB3Jtb03nirVW Ga8FG21Xy/f4rPqwcW54lxrnnh0SA0hwuZ+b2yAWESBXPxrzVQdTWCqoFI6/aRnN 8RyZn0LqRYoW7WDtKpLmfyvshBmmu4PCYSh/SYiFHgR9fsWzVcxdySDsmX8wXowu Ffp8V9sFhD4TsebAaplaICOuLUgj+Yin5QzgB0F9Ci3Zh6oWwl64SL/OxxQLpzMW zr0lrWsQrS3PgC4+6JC4IpTXX5eUqfSvHPtbRKK0yLnd9hYgvZUBvvZvUFR/3/fW +mpBHbZJBu9+/1uux46M4rJ2FeaJUf9PhYCPuUj63yu0Grn0DreVKK1SkD5V6qXN 0TmoxYyguhfsIPCpI1VsdaSWuNjJ+a/HIlKIU8vKp5iN/+6ZTPAg9Q7s3Ji+vfx/ AhFtQyTpIYNszVzNZyobvkiMUlK+eUKGlHVQp73y6MmGIlbBbyzpEoedNU4uFu57 mw4fYGHqYZmYqFaiNQv4tVrGkg6p+Ypyu1zOfIHF7eqlAOu/SyRTvZkt9VtSVEOV H7nDIGdrCC9U/g1Lqk8Td00Oj8xesyKzsG214Xd8m7/7GmJ7nXe5 -----END CERTIFICATE----- </ca> tls-cipher TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA

Is this the configuration that they provided you? You'll definitely need to remove all but one of the servers. The username/password should be your VPN login information, otherwise they should specifically say what to use. Did you have <ca> before begin certificate and </ca> after end certificate? If not then you will need that added.

Here is the link to the .114 beta version: https://www.dropbox.com/s/4mwe5sx81gsc129/XR500-V2.3.2.114-DumaOS3.0.203.img?dl=0 Hard to say, we'll be releasing a new beta version soon so it depends how well that does as to when we would release it as a stable build.

Ah I see, that means you're on DumaOS 2.0 instead of 3.0, was that intended? Not sure I follow, to move location click the home pin icon then click on the map and adjust the radius using the slider.

Hey, welcome to the forum! You will receive a router yes but after all the orders before yours have been fulfilled so it could take a few weeks - that's a rough estimate.

While not officially released that firmware had been fully tested and was linked by the XR500 lead. We do not have a finished developed firmware to provide you with. Features that make it on to the router is up to Netgear. I couldn't give an estimate at the moment. I've not heard of that issue at all, did you factory reset after upgrading? What happens when you try to make the circle bigger?