Netduma Fraser

Thanks for that, can you switch the ethernet cable connecting the R2 to the modem with a different cable and then re-test please?

Could you provide a full screenshot of the PingPlotter screen showing the bottom graph please?

As long as you followed the process above you will end up in a server within your radius even if it tries to force one elsewhere, it may just take a little longer

No that is controlled by the service, e.g. Netflix, you would just need to find a VPN that hasn't been blocked by the affected services.

El gráfico de ping bajo carga debe parecerse al gráfico de prueba de ping si es posible. ¡Es mucho mejor bien hecho! ¿Qué es el ping en el Geo-Filtro?

They can support it but they can't prevent services blocking their known VPN IP addresses, some providers offer a free trial in which case you could try it to see if that is the problem with no monetary obligation.

For CoD it's a server based game so the peers are very likely servers that are misclassified, in which case there won't be much difference. It could be they're appearing as peers because they're new servers which could explain why they perform better.

If it's a pure modem then it isn't doing any routing and so it would be a bit lower than when using a router. How are you testing the ping exactly? It can also be affected by your connection method, QoS settings and what other devices are doing at the time.

The reason it takes a little longer to block a peer is to prevent people using the router to boot people from a game so it's actually an anti-cheat feature in affect. So as you've mentioned because they're all now misclassified you're succumbing to this anti-cheat measure so as Liam mentioned we will get that sorted and you'll be able to block again more easily. For a peer to be fully blocked the connection to that peer needs to be disconnected for 2 minutes at least, so do as you were doing, quit the game, wait 2 minutes and it will be fully blocked. As for it then taking longer to get games that will be because you're filtering with the radius and then further restricting it with blocking servers in that radius so search times will increase as the amount of available servers decreases, if it's a particular busy time as well then those servers may be full.

Hay un poco más de margen de mejora, pero definitivamente mejores resultados que los que tenía anteriormente, ¡buen trabajo!

Have you tried another provider just in case the services you want block the VPN you're currently using?

I'm sure there is something to it as it would free up cached RAM for example, we know it's something people want so we are looking into implementing it

Are you forcing a game in your area/region? Are you playing solo or with a group?

Ah, you don't have access to the interface then? They should be able to do that pretty easily for you. While they are at it I would recommend you get that IP put in the modem DMZ as well so you can ensure you get an Open NAT.

Welcome to the forum! Try this: Quit the application/game/client completely Remove device from the Geo-Filter Give PC PlayStation Device Type in the Device Manager (if on PC) Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter with the manual option Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client Then see if it works more consistently.

Keep us posted, let us know if you have any questions!

No cambiaste tus velocidades a lo que pagas y volviste a cambiar la Asignación de ancho de banda, pero parece que está funcionando por el momento, así que deja la configuración como está. Estás obteniendo un buen servidor de ping. El ping del juego incluye un retraso de procesamiento que todos los juegos tienen pero no todos eligen incluir. No será lo mismo que el ping de Geo-Filter, que es su ping directo al servidor, está funcionando como se esperaba.

Para el Geo-Filter, parece que estás obteniendo un juego de 16 ms, ¡eso es genial! Puede eliminar el dispositivo del Geo-Filter, luego en el Administrador de dispositivos darle a la PC un tipo de dispositivo PlayStation, luego volver a agregarlo al Geo-Filter y seleccionar la opción manual. Aparte de eso, es bueno. Asignación de ancho de banda = ¡Bien! Priorización del tráfico = ¡Bien! Ha cambiado sus velocidades de ancho de banda para que sean mucho más bajas de lo que recibe, es mejor volver a cambiarlas a lo que recibe como lo hicimos antes. Su gráfico de prueba de ping bajo carga aún es inestable. Establece tus velocidades y experimenta con los porcentajes. ¡Estamos llegando allí! - For the Geo-Filter it looks like you're getting a 16ms game there, that is great! You could remove the device from the Geo-Filter, then in the Device Manager give the PC a PlayStation device type, then re-add it to the Geo-Filter and select the manual option. Other than that it's good. Bandwidth Allocation = Good! Traffic Prioritization = Good! You have changed your Bandwidth speeds to be a lot lower than you receive, it is best to change them back to what you get as we did before. Your Ping Test Under Load graph is still unstable. Set your speeds and experiment with the percentages. We are getting there!

It can still do that, any VPN provider that supports OpenVPN and provides you with the configuration files should work just fine

That would be the Geo-Filter tab, all the Ping Heatmap page does it ping known game servers so you can see your ping to them and then use that to inform your Geo-Filter settings. You don't appear on the Geo-Filter so it will either be an authentication server or a peer connected to your server.

Hey, welcome to the forum! It will always be the biggest icon on the map, you'll also see the Auto Ping panel appear on the bottom right of the screen (may have to scroll down depending on your screen size) and that will give you more information like the ping.

¿Qué se hizo/cambió antes de que aparecieran los errores? Parece que has hecho lo contrario de los cambios que he recomendado. Intentaré ser más claro: Geofiltro - 0 Asistencia de ping QoS - Control de congestión - Cambio de porcentajes, prueba de referencia de conexión, cambio de porcentajes, prueba de referencia de conexión, etc. hasta que encuentre los valores que hacen que el gráfico de ping bajo carga se parezca al gráfico de prueba de ping QoS - Asignación de ancho de banda (donde ahora configuró Juegos en 96%) - Haga clic en el botón restablecer distribución, luego en el botón aplicar distribución. No cambie los porcentajes aquí. Para los errores reinicia el router, espera 2 minutos y luego accede. - What was done/changed before the errors appeared? It looks like you've done the opposite of the changes I have recommended. I'll try to be more clear: Geo-Filter - 0 Ping Assist QoS - Congestion Control - Change percentages, Connection Benchmark test, change percentages, Connection Benchmark test etc until you find the values that make the Ping Under Load graph look like the Ping Test graph QoS - Bandwidth Allocation (where you have now set Gaming to 96%) - Click the reset distribution button, then the apply distribution button. Don't change percentages here. For the errors reboot the router, wait 2 minutes and then access.

With just the power and your PC connected to it (so VM removed from it) and removing the static IP, open command prompt, type ipconfig press enter and then post a screenshot of the results here please.

Control de congestión sí, dije 70%, sin embargo, después de ver los resultados de Connection Benchmark, no es el mejor porcentaje para usted. Siga el procedimiento para hacerlo lo mejor posible arriba. Asignación de ancho de banda, restablecer distribución, aplicar distribución y no ajustarla

What is the model of the modem you're using? The easiest way I should think to resolve this would be to set the XR WAN IP as static on the modem if applicable so that it gets it every time