hurricane1984 Posted March 2, 2021 Share Posted March 2, 2021 1 hour ago, Netduma Fraser said: While not officially released that firmware had been fully tested and was linked by the XR500 lead. We do not have a finished developed firmware to provide you with. Features that make it on to the router is up to Netgear. I couldn't give an estimate at the moment. I've not heard of that issue at all, did you factory reset after upgrading? What happens when you try to make the circle bigger? No i just updated via the update menu in the browser. So i need to refert to default settings first, reboot and than flash the new firmware again? Well, i can make the circle bigger, but when i am on the map out side of the circle i cannot drag it down or move it at all, its centered while i could before. Its not a big issues but still its convenient to do so. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 2, 2021 Administrators Share Posted March 2, 2021 25 minutes ago, hurricane1984 said: No i just updated via the update menu in the browser. So i need to refert to default settings first, reboot and than flash the new firmware again? Well, i can make the circle bigger, but when i am on the map out side of the circle i cannot drag it down or move it at all, its centered while i could before. Its not a big issues but still its convenient to do so. Ah I see, that means you're on DumaOS 2.0 instead of 3.0, was that intended? Not sure I follow, to move location click the home pin icon then click on the map and adjust the radius using the slider. JimmyJimmy 1 Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 3, 2021 Share Posted March 3, 2021 13 hours ago, Netduma Fraser said: Ah I see, that means you're on DumaOS 2.0 instead of 3.0, was that intended? Not sure I follow, to move location click the home pin icon then click on the map and adjust the radius using the slider. Hmm, no this was not intended, i was about to flash the newest 3.0 version.. I got this from a download link you provided. Maybe i didn't read correctly before flashing lol. Meh, i keep it like this i think and flash again when new stable version is available, shouldn't be that much longer does it? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 3, 2021 Administrators Share Posted March 3, 2021 7 hours ago, hurricane1984 said: Hmm, no this was not intended, i was about to flash the newest 3.0 version.. I got this from a download link you provided. Maybe i didn't read correctly before flashing lol. Meh, i keep it like this i think and flash again when new stable version is available, shouldn't be that much longer does it? Here is the link to the .114 beta version: https://www.dropbox.com/s/4mwe5sx81gsc129/XR500-V2.3.2.114-DumaOS3.0.203.img?dl=0 Hard to say, we'll be releasing a new beta version soon so it depends how well that does as to when we would release it as a stable build. JimmyJimmy 1 Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 3, 2021 Share Posted March 3, 2021 1 hour ago, Netduma Fraser said: Here is the link to the .114 beta version: https://www.dropbox.com/s/4mwe5sx81gsc129/XR500-V2.3.2.114-DumaOS3.0.203.img?dl=0 Hard to say, we'll be releasing a new beta version soon so it depends how well that does as to when we would release it as a stable build. Thnx, it looks similar which is why i was confused i guess. Im gonna flash the firmware tonight. Looking forward to the next perhaps stable build. Still, im pretty happy with the XR500 so far. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
SurvivorOf Posted March 5, 2021 Share Posted March 5, 2021 Some of the games on the Ping Heatmap have zero servers. I'm currently using the XR500. I'm using the V2 3.2.114 OS version. The Call of duty option on the geofilter is only using one call of duty it seems. All Call of Duty servers work accept Call of Duty: Black Ops 4 , in the U.S. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 5, 2021 Administrators Share Posted March 5, 2021 2 hours ago, SurvivorOf said: Some of the games on the Ping Heatmap have zero servers. I'm currently using the XR500. I'm using the V2 3.2.114 OS version. The Call of duty option on the geofilter is only using one call of duty it seems. All Call of Duty servers work accept Call of Duty: Black Ops 4 , in the U.S. Thanks for the report, I've compiled a list of all the heatmap games that need to be updated and have passed it over to the team to update. JimmyJimmy 1 Link to comment Share on other sites More sharing options...
JimmyJimmy Posted March 7, 2021 Share Posted March 7, 2021 -.- Link to comment Share on other sites More sharing options...
JimmyJimmy Posted March 10, 2021 Share Posted March 10, 2021 simple question is it coming this month yes or no answer only please. xr300 beta doesn't matter if it works because I'm gonna throw the router away when I buy a new one, or blow it up and post a youtube link if anyone is interested. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 11, 2021 Administrators Share Posted March 11, 2021 8 minutes ago, JimmyJimmy said: simple question is it coming this month yes or no answer only please. xr300 beta doesn't matter if it works because I'm gonna throw the router away when I buy a new one, or blow it up and post a youtube link if anyone is interested. It's not that simple, development is a long process and if it hits QA and bugs are found then they will be fixed which will ultimately push back when we can release it. We learnt a long time ago that it was better not to give dates. JimmyJimmy 1 Link to comment Share on other sites More sharing options...
JimmyJimmy Posted March 12, 2021 Share Posted March 12, 2021 On 3/11/2021 at 1:00 AM, Netduma Fraser said: It's not that simple, development is a long process and if it hits QA and bugs are found then they will be fixed which will ultimately push back when we can release it. We learnt a long time ago that it was better not to give dates. ah ok thanks, I know that giving a date is impossible with all the testing that is needed that's why I wanted an unfinished version. But if it's so instable that I can't use it than I might as well buy an upgrade. It just sucks that in the netherlands you can't buy a netduma from a reputable store and I don't really want to support netgear since they bottleneck the cheaper versions through software. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 12, 2021 Share Posted March 12, 2021 11 hours ago, JimmyJimmy said: ah ok thanks, I know that giving a date is impossible with all the testing that is needed that's why I wanted an unfinished version. But if it's so instable that I can't use it than I might as well buy an upgrade. It just sucks that in the netherlands you can't buy a netduma from a reputable store and I don't really want to support netgear since they bottleneck the cheaper versions through software. We can ship the R2 to the Netherlands if you were interested in a Netduma router! Link to comment Share on other sites More sharing options...
JimmyJimmy Posted March 12, 2021 Share Posted March 12, 2021 24 minutes ago, Netduma Liam said: We can ship the R2 to the Netherlands if you were interested in a Netduma router! That would be great, from where do you ship and how long would that normally take? I'm worried that due to the pandemic it would get a lot of delays. Also in the netherlands you get screwed over a lot by vats even when already handled, they still try to get you to pay extra which is weird and borderline criminal. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 12, 2021 Share Posted March 12, 2021 1 hour ago, JimmyJimmy said: That would be great, from where do you ship and how long would that normally take? I'm worried that due to the pandemic it would get a lot of delays. Also in the netherlands you get screwed over a lot by vats even when already handled, they still try to get you to pay extra which is weird and borderline criminal. We ship from England, it would normally take a couple of days however currently we are working through dispatching a lot of pre-orders so delivery times are delayed. Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 21, 2021 Share Posted March 21, 2021 Well that's not cool. I bought a new SSD and cloned my Os to the new drive but now i cannot login to my router anymore and i forgot the password.. I did the security check but the answers to the questions are not correct it says while i am for 10000% sure they are... now i have to reinstall the whole router again.. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 21, 2021 Administrators Share Posted March 21, 2021 19 minutes ago, hurricane1984 said: Well that's not cool. I bought a new SSD and cloned my Os to the new drive but now i cannot login to my router anymore and i forgot the password.. I did the security check but the answers to the questions are not correct it says while i am for 10000% sure they are... now i have to reinstall the whole router again.. Unfortunately there is no other way if it's not taking the security answers. It won't take long to set it up again really Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 22, 2021 Share Posted March 22, 2021 On 3/21/2021 at 9:20 PM, Netduma Fraser said: Unfortunately there is no other way if it's not taking the security answers. It won't take long to set it up again really yes its working again though. On another note, the connection benchmark is not accurate in the slightest, i get very low download speeds. Its only 388 and upload is 548 while i have an 1Gbps connection. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 23, 2021 Share Posted March 23, 2021 16 hours ago, hurricane1984 said: yes its working again though. On another note, the connection benchmark is not accurate in the slightest, i get very low download speeds. Its only 388 and upload is 548 while i have an 1Gbps connection. OK great. What did you input your speeds as being during initial setup? You can double check by going to the three-dot menu in the top right and going to advanced -> network speeds. Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 24, 2021 Share Posted March 24, 2021 18 hours ago, Netduma Liam said: OK great. What did you input your speeds as being during initial setup? You can double check by going to the three-dot menu in the top right and going to advanced -> network speeds. Its set to 1000mbps up and down and get 464 down and 700 up. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 24, 2021 Share Posted March 24, 2021 4 hours ago, hurricane1984 said: Its set to 1000mbps up and down and get 464 down and 700 up. If you're seeing that in Connection Benchmark, that's telling us what the R2 is getting from the modem. If it were a problem with the R2 then you would see 1gpbs in connection benchmark but lower speeds to connected devices. Are there other devices connected to the modem/router or does everything on the network go through the R2? Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 25, 2021 Share Posted March 25, 2021 I only use the XR500 as modem/router. When i do speedtest via Ookla i get 950 up and down, only when i do the connection benchmark via the interface i get this low speeds. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 25, 2021 Share Posted March 25, 2021 3 hours ago, hurricane1984 said: I only use the XR500 as modem/router. When i do speedtest via Ookla i get 950 up and down, only when i do the connection benchmark via the interface i get this low speeds. That's interesting, are your bandwidth speeds entered correctly? You can check this by clicking the three-line menu in the top right of the interface -> Advanced -> Set bandwidth speeds. Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 26, 2021 Share Posted March 26, 2021 19 hours ago, Netduma Liam said: That's interesting, are your bandwidth speeds entered correctly? You can check this by clicking the three-line menu in the top right of the interface -> Advanced -> Set bandwidth speeds. yes everything is correct. Link to comment Share on other sites More sharing options...
Netduma Liam Posted March 26, 2021 Share Posted March 26, 2021 Thanks, there is actually now a newer beta firmware that we'd suggest you upgrade to:https://www.dropbox.com/s/l3oeb6dw25ngmwm/XR500-V2.3.2.120.zip?dl=0 We'd suggest factory resetting after you've installed this, you can then go through and quickly setup the network settings again, hopefully that should resolve your issue. Link to comment Share on other sites More sharing options...
hurricane1984 Posted March 28, 2021 Share Posted March 28, 2021 ah, thnx. Will try it out. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Recommended Posts