-
Posts
83941 -
Joined
-
Days Won
1728
Everything posted by Netduma Fraser
-
Could you create a new topic with exactly what your issue is and what happened prior please?
-
Im new here just wondering which router to get
Netduma Fraser replied to Exia's topic in Community Discussion
Could you do a reboot of the router, wait 2 minutes and then try the router config I posted previously again please? -
Im new here just wondering which router to get
Netduma Fraser replied to Exia's topic in Community Discussion
Could you try disabling all the additional options, then try with that config (also provide it here) as well as making one for linux with all the options disabled and provide it here as well please? -
What MAC address are you referring to, your PC or the router MAC? What firmware version are you using? What is the model of the modem/router the R2 is connected to?
-
XR1000 geo filter
Netduma Fraser replied to Ahmad Alkayem's topic in NETGEAR Nighthawk Support (XR range)
You will need to put Ping Assist to 0 to force specific servers, set that and see whether you get the server you want -
So it just happened randomly, no precursor you can think of? I don't think they've blocked TFTP, they seem to update the guide and miss a crucial step for some reason, if you follow the guide, before you turn the router back on hold the reset button, turn it on and while continuing to hold wait for the power to flash 10 times, then let go of the reset and push the upgrade. Are you on the very latest firmware, .64? As I know it has occurred a lot less on the latest update.
-
Escape From Tarkov (IS needed)
Netduma Fraser replied to II NaStY III's topic in New Games for the Geo-Filter
Are you in a game in that screenshot? -
When you say modem do you mean the R2 or your ISP modem?
-
Im new here just wondering which router to get
Netduma Fraser replied to Exia's topic in Community Discussion
When you generated the config on proton, was DumaOS specifically an option under router? -
Let's continue in the other topic then, if you don't respond there then we don't know whether it has been resolved and can't move on with next steps https://forum.netduma.com/topic/40004-netduma-r2-not-working-tired-reset-button-still-not4-working/#comment-346338
-
Escape From Tarkov (IS needed)
Netduma Fraser replied to II NaStY III's topic in New Games for the Geo-Filter
Alright no worries, we'll take a look, thanks for letting us know! -
Im new here just wondering which router to get
Netduma Fraser replied to Exia's topic in Community Discussion
Try this instead please: [Interface] Address= 10.2.0.2 PrivateKey= *** ListenPort =51820 dns = 10.2.0.1 [Peer] PublicKey= n/idwelCXImEAeK314La1IwXp23P1FeGbiI7GrvudGg= AllowedIPs =0.0.0.0/0 Endpoint = 45.152.182.130:51820 -
Could you disable Armor please then reboot the router, wait 2 minutes and see if it works correctly
-
DumaOS app crashes on iPhone with iOS 16.0.2
Netduma Fraser replied to e38BimmerFN's topic in DumaOS Mobile App
That would be great to check, the latest is .64 so would be a good one to try, that's when Adblocker was added it so it may be the app is expecting Adblocker and because you don't have it, it's throwing an error. https://kb.netgear.com/000064837/XR1000-Firmware-Version-1-0-0-64 -
Copie la IP de WAN de la página Información del sistema R2 y acceda a la interfaz de Vodafone y péguela en la DMZ de Vodafone. Si no hace esto, no será posible obtener un Open NAT. Todo debe estar conectado al R2 si es posible para que QoS sea efectivo. No ha configurado sus velocidades en el R2, por lo que deberá hacerlo, le recomendaría consultar nuestras guías de configuración óptima aquí: https://support.netduma.com/en/support/solutions/folders/16000090646 Ping Assist está en la página Geo-Filter en la parte inferior del mapa, actualmente está configurado en 50, póngalo en 0.
-
XR1000 geo filter
Netduma Fraser replied to Ahmad Alkayem's topic in NETGEAR Nighthawk Support (XR range)
Hey, welcome to the forum! Can you provide a screenshot of your Geo-Filter page please? -
It's most likely that the router has reset, on the wired PC see if you can access the interface, if the setup wizard appears you'll need to complete that (you can also change the WiFi password here) and once done you should get internet
-
Are you able to connect to the internet via a wired PC? When did this issue occur, after upgrading, changing settings, rebooting etc?
-
Escape From Tarkov (IS needed)
Netduma Fraser replied to II NaStY III's topic in New Games for the Geo-Filter
Do you see anything blocked at all when you launch the game? -
That will be a mislocated server most likely, I'll get onto the team to correct that and locate the Aus server to be put there. It is unlikely your ping is that low to the game server, it may be that we can't ping the game server properly (some servers refuse a ping) in which case it will show the ping to the furthest hop to the server it can get to. I'll speak with the team about it, given it came out on Friday we won't have had much time to test so this will all improve once we get some time with the game.
-
Could you try again with a different browser please? When the internet disconnects does it reconnect on its own, do you have to reboot etc? Does it happen for all devices or specific devices? Do you still have access to the interface when it happens?
-
Im new here just wondering which router to get
Netduma Fraser replied to Exia's topic in Community Discussion
Can you provide the config you're using please? -
Escape From Tarkov (IS needed)
Netduma Fraser replied to II NaStY III's topic in New Games for the Geo-Filter
What happens when you try to get a game within your radius, does it continue searching and never finds one? There may be a server you need to allow to get it filtering. Do you see anything blocked when you load up the game for the first time? If so add that to the allow list and then see if filtering works. -
¿Cómo tienes configurado el router de Vodafone, está en modo módem o tienes la IP R2 WAN en su DMZ? ¿Sigue habiendo dispositivos conectados al router de Vodafone? ¿Cuáles son sus velocidades 1000/1000 o no ha configurado esto en el R2? Deberá usar QoS para obtener el mejor ping posible, actualmente no se usa. Para forzar servidores específicos, debe configurar Ping Assist en 0.