Netduma Fraser

Welche Einstellungen ändern Sie sofort nach einem Werksreset? Haben Sie die WLAN-Details im Assistenten aktualisiert und sich dann mit diesem Passwort erneut verbunden?

Keine statische Route, stellen Sie reservierte IPs in den LAN-Einstellungen unter DHCP ein

Ich kann im Protokoll nichts finden, was sich speziell auf WLAN bezieht. Stellen Sie in den LAN-Einstellungen reservierte IP-Adressen für die WLAN-Geräte ein und prüfen Sie, ob sie dann eine Verbindung erhalten

You'll need to experiment with the upload percentage on Congestion Control to get the Ping Under Load graph results down to a more flat level, so change percentage, test, change, test etc until you find a good value. Then see if you still have packet loss.

Yes that's right thank you. I don't see any packet loss there but your Ping Under Load is very high which could potentially be causing it. Can you provide a screenshot of your QoS page please?

Pinging the game server in the way you are doing will always result in packet loss as the servers reject pings, we can only do it as we implemented a workaround. Can you provide a screenshot of a completed Connection Benchmark test please?

What router are you using with the app exactly - the XR300?

I've approved you so you can access the Early Access forum now, we're working on DPI separately and running a test at the moment, it won't be long before it hits your router and you should then notice an improvement.

Lorsque vous effectuez une réinitialisation d'usine, il réinitialise l'ensemble de l'appareil aux paramètres de base, il est normal de perdre la connexion, vous ne pouvez pas conserver une connexion pendant ce processus. Faites la réinitialisation, attendez quelques minutes puis essayez une connexion et cela fonctionnera.

Wenn das Problem auftritt, können Sie die Protokolldatei von der Seite Systeminformationen abrufen, die möglicherweise weitere Informationen enthält. Haben Sie eine der Antennen entfernt oder den Router fallen gelassen?

It can take quite awhile, if they make changes then they have to test everything, if they find an issue then that has to get fixed, then re-tested etc. They don't give out any ETAs, the best place for news is on that page, whatever we know we'll update it with.

Hallo, willkommen im Forum! Bitte führen Sie einen Werksreset durch, entweder über die Schnittstelle oder indem Sie die Reset-Taste 30 Sekunden lang gedrückt halten, loslassen, 2 Minuten warten und dann zugreifen. Dies wird nach einem Firmware-Update empfohlen.

Just to check as I have seen this message appear when the internet port on the R2 is connected to a device instead of the modem, the internet port of the R2 is connected to the fritz LAN port?

Hey, welcome to the forum! Sorry to hear you're having this issue. Does the internet go out completely? Does it happen on every device? Does it happen at any specific time/when doing something specific online? I'd suggest signing up to Early Access so you have the opportunity to test out pre-release firmware. https://forum.netduma.com/topic/39415-introducing-early-access/

They are changing the servers often at the moment so we update and it goes out of date quickly, we'll push another update tomorrow but we are looking for a more permanent solution.

That's fine, where possible we have named the servers where they are located. Servers are often clustered in the same location so for example California-4 is the fourth server in that cluster.

Switch to a different game, are those able to be pinged?

We're pretty much putting out updates daily and it doesn't take long before it is out of date again, we'll push another on Monday which I suspect will quickly become out of date but we are looking into more permanent solutions.

Did you see whether the BGW was using PPPoE or anything like that for a connection?

Just to clarify, do you mean you're using the exposed host and port forwarding?

As above is it definitely the correct WAN address? This can change if you reboot the router. Do you have any firewall rules on the fritz? Have you set DMZ or port forwarding on the R2?

Could potentially be a NAT issue, when you say the R2 is the main router, what is it connected to exactly, a modem, ONT etc? What is your NAT type as shown by the console?

Potrebbe essere o meno un server e non un peer, semplicemente classificato erroneamente sulla mappa. Vedrai l'IP sì nel pannello ping. Non ti vedrai sulla mappa, il Geo-Filtro mostra le connessioni che fai e tu non creerai una connessione con te stesso.

Hey, welcome to the forum! We would certainly look into it, it would depend on the cost really and the end cost to consumers

On the R2 System Information page does it show that it has a WAN IP and vice versa, is the VM interface showing the R2 as a connected device with an IP?