Netduma Fraser

Yes the XR500 does have an AP mode so you could use that with the R3

That is very strange, are you accessing the router using a bookmark? Copy the WAN IP from the R2 System Information page, enter that in your ISP modem/router DMZ and then on the R2 WAN Settings enable remote support then post back here from a device connected to the R2 and we can attempt to force an upgrade through tomorrow.

Yes everyone who has ordered will get a tracking email when it has shipped. Your order confirmation may have gone to your spam folder That's always going to be a tough one because it's going through another device, I don't know if we have specifically tested that but I'll ask the team

Yeah the results are generally good, for Traffic Prioritization remove the Games Console rule but keep DumaOS Classified Games enabled and see whether that improves it for them

It should be fine, we haven't specifically tested the R3 with any mesh systems I don't think but in theory there wouldn't be a problem

Traffic Prioritization is at the bottom of the QoS page. Could you provide a screenshot of a completed Connection Benchmark test please?

You can reset Bandwidth Allocation, it's not necessary. ALL devices should be connected to the R2 for QoS to properly be able to control the network and eliminate lag so if you have devices upstream connected to the ISP modem/router QoS won't work properly. How do you have Traffic Prioritization set up?

Not sure when at the moment, depends how long it takes to port over

Should be basically gigabit from our testing!

We don't have any specific recommendations but any should work really

The way it works is that it takes the first ping response, if that is below your limit it will be allowed even if then the ping goes up, that allowing as already happened. We have improved upon this in DumaOS 4 though which will come to the R2 at a later date

If it's strict when connected directly to the 5G router then unfortunately not

I think you'd have to consult their support regarding this, I'm not familiar with it so I'm not sure in what way it should behave. If you connect devices to it are they getting an IP from the R2? If so it's likely working as expected.

I have sent it to you in a direct message on the forum

No its not but that's a good suggestion, I'll add it to our list.

It's most likely in spam, if not I can resend it

I can send you a screenshot of the order on the backend if you would like that for your records?

Does a reboot from the interface reset it as well? Reboot from the interface then attempt the upgrade as fast as you can, if that doesn't work, reset then update asap

Thanks, I've passed in on to a dev to take a look and will get back to you.

5GHz is more susceptible to interference, in relation to the router location where are you trying to use 5GHz? Could you provide a screenshot of your QoS page please?

Great to hear that, thanks for the update!

I would expect updates to be more frequent than the XR range yes Email us [email protected] with your order number and what the correct address should be. It's worth getting it right so there are no issues when shipped.

It's not a code, it's a public discount, go on Netduma.com: If you make a topic we can help with your issues.

Puede registrarse aquí para ser agregado a la versión beta cuando esté disponible. Debido a circunstancias fuera de nuestro control, estuvimos esperando una compilación durante bastante tiempo, lo que significaba que no podíamos hacer nada. https://forms.gle/Jg6BnARJKoEPKeU28

You would have had to, it never applied to the entire router. You'll need to use Do NOT VPN these services, then it will apply to your entire PC.