Netduma Fraser

Exactly as above, I'll sure we'll implement it

Once the team are back from the holidays and they have the ability to fix any major issues that could have potentially happened due to that version - it looks fine to me from what I can tell. I can send it to you manually, it's the exact same as it would be when it hits your router automatically

Once the team are back from the holidays and they have the ability to fix any major issues that could have potentially happened due to that version - it looks fine to me from what I can tell.

In what way isn't it working? Are you experiencing lag/buffering when others are using the internet?

Okay thank you, I'll pass that on to the team to look at. That's great to know thanks!

Sent

This is just for troubleshooting so I can find the cause of the problem, once I know the problem I can let the team know so they can fix it. Have you had it since disabling? Did you disable it properly from SmartBOOST settings? It won't be enough to delete the priorities Try disabling SmartBOOST as I mentioned above please Keep us posted! If it happens again disable SmartBOOST as above

You'll need to use this link to get to QoS: http://192.168.77.1/dumaweb/#smartqos

As above it will come to the R2 at a later date

No I wouldn't have thought so, would be disabled with SmartBOOST being disabled anyway, still no sign of the issue?

As above I need more specifics if I'm able to advise you better

As above it should actually already be added for you to select

As above, no that's not possible, even if that did work none of the functions would work. DumaOS 4 will come to the R2

Sent to you all in a PM Beta isn't available for the XR1000 yet

I think it's likely we just need to make more improvements. Although if you haven't done a factory reset on the .23 firmware yet please go ahead and do so and see if it is any better. As there has been a few firmware versions it would be good to do one to clear any remnants of previous versions.

Actually I don't think anyone has tried that specifically so would be good if you could let us know. For the UI, if you disable SmartBOOST fully from > Settings does it still fail to load?

Before that because you shouldn't need to port forward that much. Another user found this worked for them: "For PC, if MW3 doesn't show as OPEN for NAT, what I'd recommend you to do is reset your windows network settings and factory reset your router after doing so. Once I did it, 90% of the time under UPNP in dumaos will show as demonware port mapping with 3074 port open."

I'm not a developer, I wouldn't know what to look for, I also cannot remote access until the next version. Disable IPv6 just for the LAN then reboot the R3, does it work then?

What were you using before to connect to that modem? Check that routers internet settings and then put them into the R3 or connect the R3 to that instead

Thank you for the review, to comment on some of your points: That's great to know thank you, we're aware there may be some issues with UPnP triggering properly so the team will be looking into that when they're back. The team will be improving this more, some times it won't be possible to stabilize the ping and it won't always work for other games. Great! You can disable it, just click "Off" on the RGB controls. If you click change mode as well you'll see the option for dynamic game lighting, this should be enabled by default so you should this in game, if not let us know. The white LEDs that has been requested so it is on the list. I've let the team know so they'll look into it when they're back

Try this please, another user suggested it: " For PC, if MW3 doesn't show as OPEN for NAT, what I'd recommend you to do is reset your windows network settings and factory reset your router after doing so. Once I did it, 90% of the time under UPNP in dumaos will show as demonware port mapping with 3074 port open."

That's how Ping Assist works, you've told it to connect you with games under 60ms so it's done that - games under 60ms may be outside your radius and therefore you can then connect to them. If you want to exclusively use the radius Ping Assist should be set to 0. When you deny a server fully the connection has to be completely severed before it can be blocked, if you research immediately the connection can be kept alive and therefore it does not become blocked. The next time you go to play after a break it'll be blocked, if you restart the game/console it will sever the connection and be blocked. Keep in mind there are usually lots of servers clusters in the same location. You may not connect to all the servers within the radius, you can try to force those specifically by just covering them but some servers are notoriously hard to force.

Sorry didn't mean sent, meant added, you have access to it here https://forum.netduma.com/forum/144-netduma-r2-early-access/ No, no creo que vaya a llegar al R1. Added

As it's the holidays everyone is off until the new year so they'll look at everything then and firmware updates will start to come out over the course of January

At the moment it just has the toggle but it has been requested for more IPv6 options so it's on the list for potential future inclusion