Netduma Fraser

All looks good on waveform there, as long as you have Congestion Control active you won't get anywhere near a max ping like that.

That's probably why, remove them and try again

You've just said though the game will not put you in local games at all due to your skill so it doesn't sound like it's going to be a guarantee the Geo-Filter can put you on them - the game still has to accept your connection to the server

Do try the above, we have seen that helps generally

Do you still have the port forwarding enabled on modem and XR500?

I'd suggest factory resetting after the update as there is likely a big jump and remnants of the previous versions might be causing you issues

Are you noticing any issues that line up with these entries at all?

The team are working on the more pressing issues that people have reported so it won't be fixed in the next one but we'll definitely be getting it fixed

I just replied to your other topic with the exact same video above!

Exactly as above, sorry we can't help on this one!

Your PC can't open the file, you need to access the router interface, go to Settings > Troubleshooting > Upload firmware and do it there

There is an in depth video here that I think will help you a lot:

Correct, it's a NG feature, I don't think they'll be updating that. You can likely achieve the same affect for HTTPS using the Adblocker instead

Interesting, not seen that before - did you have anything else plugged into the same extender as the R3 potentially?

I don't have any/haven't used any for a long time but if you still have the XR1000 you can put that in AP mode and that would be a good setup!

NAT Type 2 is open, it just means you're connected to a router as opposed to a pure modem

No the port forwarding on both isn't necessary, the DMZ on the modem should be fine. If not then set NAT to Open in WAN Settings on the XR500

It is the details you use to login to the interface normally - admin / password is the default if you didn't change it

No specific recommendations on APs, any should work really!

It's on the XR500 System Information page, right in the middle panel. The 0.6 address might be it but just double check on System Information and put that in the DMZ/Exposed host function on the modem

That's great to hear, thanks for the update!

If you could make a new topic and include logs from Settings > Troubleshooting > Advanced when it happens we can take a look

It'll be on the ISP modem/router LAN/DHCP settings, all you need to do is add reservation for the R3 and give it the IP it has already/the one it the ISP router DMZ

I don't think there are any servers within your radius that's why, it looks like from your previous screenshot like you've denied the closest servers as well so it will keep trying to connect you to servers you can't connect to

It should be able to work with Geo-Latency now on the R3 but it's not something we'd be able to bring to the XR range unfortunately