Jump to content

Traffic prortization please read


kinel
 Share

Recommended Posts

On 10/29/2020 at 10:12 AM, Alex49H said:

Boriqua! Que dice pana? Hey here is one you can try out also, 1024-65535 Start and Destination using UDP as the Protocol!

been using these ports and testing yours mate. i find a lot more prioritized packets being detected on the lists on traffic prio. Kinda been liking it! i still want to test which one has most packets (kinels recomendations) and yours. and i want to check which one gives me lower pings (yes traffic prio gives me lower pings on Puerto Rico) and better hit registrations.

Link to comment
Share on other sites

8 hours ago, SolidOny said:

been using these ports and testing yours mate. i find a lot more prioritized packets being detected on the lists on traffic prio. Kinda been liking it! i still want to test which one has most packets (kinels recomendations) and yours. and i want to check which one gives me lower pings (yes traffic prio gives me lower pings on Puerto Rico) and better hit registrations.

Chevere, chevere mano. Yes test all the recommendations. Cual de todos es más consistente para ti y tu conexión. That is the key. 

Link to comment
Share on other sites

12 hours ago, Alex49H said:

Chevere, chevere mano. Yes test all the recommendations. Cual de todos es más consistente para ti y tu conexión. That is the key. 

update! DEFINETLY THESE rules has way more packets being prioritized in netduma. EVERYONE i recomend @Alex49H settings! Just give it a try!

Link to comment
Share on other sites

On 11/3/2020 at 11:49 PM, SolidOny said:

been using these ports and testing yours mate. i find a lot more prioritized packets being detected on the lists on traffic prio. Kinda been liking it! i still want to test which one has most packets (kinels recomendations) and yours. and i want to check which one gives me lower pings (yes traffic prio gives me lower pings on Puerto Rico) and better hit registrations.

aqui desde PR! mira esto te funciono??? yo sigo con lag spikes mano me tiene loco!!!

Link to comment
Share on other sites

2 hours ago, designerema said:

aqui desde PR! mira esto te funciono??? yo sigo con lag spikes mano me tiene loco!!!

Pana pruébalo. Aunque los lag spikes puede ser otra cosa. Pero dar prioridad a ciertos ports ayuda a que el juegos sea menos loco. 

Link to comment
Share on other sites

2 hours ago, Alex49H said:

Pana pruébalo. Aunque los lag spikes puede ser otra cosa. Pero dar prioridad a ciertos ports ayuda a que el juegos sea menos loco. 

so debo poner los game port en el port forwarding y desactivar upnp? q me recomiendad mano pq me tiene loco esta duro perder gunfights por eso

Link to comment
Share on other sites

Mira UPNP es para abrir los ports necesario para tener un Open NAT. Es la mejor opción. 
 

Pero darle prioridad a los ports es en la sección de QOS. Traffic Prioritization es diferente de UPNP y Port Forwarding si logras un Open NAT con UPNP déjalo  eso es lo mejor. Lo que Traffic Prio hace es poner los paquetes del juego en primer lugar para minimizar la perdida de packets si hay otros aparatos o aplicaciones que estén descargando cuando estes jugando  

1. Desactiva DumaOS Classified Games en QOS

2. Añadir un device haz clic

3. Selecciona tu consola Xbox o PS4

4. Selecciona Advanced

5. En la sección de Start escribe 1024 - 65535. Después en Destination escribe lo mismo de 1024-65535. 
6. Protocolo selecciona UDP y save. 

Me dices cómo te va. 

Link to comment
Share on other sites

Hi,

 

I´m new to this, and until Cold War is out, I´m playing WW2. I would like to ask, do I need to restart my router when I make these port forwarding stuff? I don´t have DMZ, I have UpnP and in the QOS, I have gaming set to 90 on al devices. The upper sliders are at max with 100mbps and 20mbps and set to never.

I would really like to try out these port forwardings, so I should leave the sliders at max and use the "always option" and turn off the upnp as well? Do I need to restart the router each time I try out new port forwardings? Thanks in advance!

Link to comment
Share on other sites

On 11/8/2020 at 3:07 AM, Alex49H said:

Mira UPNP es para abrir los ports necesario para tener un Open NAT. Es la mejor opción. 
 

Pero darle prioridad a los ports es en la sección de QOS. Traffic Prioritization es diferente de UPNP y Port Forwarding si logras un Open NAT con UPNP déjalo  eso es lo mejor. Lo que Traffic Prio hace es poner los paquetes del juego en primer lugar para minimizar la perdida de packets si hay otros aparatos o aplicaciones que estén descargando cuando estes jugando  

1. Desactiva DumaOS Classified Games en QOS

2. Añadir un device haz clic

3. Selecciona tu consola Xbox o PS4

4. Selecciona Advanced

5. En la sección de Start escribe 1024 - 65535. Después en Destination escribe lo mismo de 1024-65535. 
6. Protocolo selecciona UDP y save. 

Me dices cómo te va. 

lo use y ya casi no tengo los cuadritos de packet burst en el juego pero aun sigo son random spikes de ping pero chekie con ping plotter y creo q es mi proveedor

Link to comment
Share on other sites

24 minutes ago, designerema said:

lo use y ya casi no tengo los cuadritos de packet burst en el juego pero aun sigo son random spikes de ping pero chekie con ping plotter y creo q es mi proveedor

Si y tambien son los servidores o servers de Activision in Call of Duty. A mi tambien me sucede.

Link to comment
Share on other sites

Ok so far using 1:65535 start and Destination and selecting TCP/UDP is working for me in Cold War. 
 

Correction: even better using start 1024-65535 and destination same with Protoccol TCP/UDP. 

Link to comment
Share on other sites

9 hours ago, iCreats said:

I’m using 3074-3075/30000-45000, show packet etc but still laggy and having huge late bullets.

That is not laggy or late bullets.

That guy probably heard u already coming he was already ads exactly the place u were coming from while u were running from behind that wall and took ur gun and tried to ads and shoot him he hit u earlier thats why u were dead also.

Link to comment
Share on other sites

12 hours ago, Alex49H said:

Ok so far using 1:65535 start and Destination and selecting TCP/UDP is working for me in Cold War. 
 

Correction: even better using start 1024-65535 and destination same with Protoccol TCP/UDP. 

Tried this and had 5 decent games, next game I'm up against a party with 2 people that are top 5 on Aus leaderboards.. lol

Link to comment
Share on other sites

15 minutes ago, johnnytran said:

Tried this and had 5 decent games, next game I'm up against a party with 2 people that are top 5 on Aus leaderboards.. lol

Yeah that’s SbMM kicking in.

Link to comment
Share on other sites

18 hours ago, Alex49H said:

Ok so far using 1:65535 start and Destination and selecting TCP/UDP is working for me in Cold War. 
 

Correction: even better using start 1024-65535 and destination same with Protoccol TCP/UDP. 

isn't TCP/UDP bad or not bad?

Link to comment
Share on other sites

4 hours ago, Baturi said:

isn't TCP/UDP bad or not bad?

TCP didn’t really work for me in MW. But I am going to continue to test in Cold War. Maybe it was placebo because gaming packets are UDP. 

Link to comment
Share on other sites

Using ports 1024-65535 as a priority is like using console mode in itself from what I understand!

Besides thing for which, I scratch my head ...
Since now the COD are cross platform, what is the point of putting his console in the geofilter since all servers are the same according to the platform. If I identify my xbox or PS4 as a PC it won't change anything?!

Link to comment
Share on other sites

2 hours ago, Fuzy said:

Using ports 1024-65535 as a priority is like using console mode in itself from what I understand!

Besides thing for which, I scratch my head ...
Since now the COD are cross platform, what is the point of putting his console in the geofilter since all servers are the same according to the platform. If I identify my xbox or PS4 as a PC it won't change anything?!

Connection today was crazy for me on PS4. I went back to DumaOS Classified games priority. 

Link to comment
Share on other sites

it doesn't make sense! prioritize the console or use Classified games returns to the same ...

I test all the ports given by portforward.com none works in UDP console and PC confused.

the only thing that works in UDP is to open as said before 1024-65535 in both directions ... which is like using classified games!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...