Netduma Liam

I've created a ticket and given it to the necessary team but no update as to whether it can resolved quickly in the back-end. I'll chase them up now.

We just tested a version yesterday, it did pretty well. We've requested a new firmware from NETGEAR with some new patches in it so we're hoping we might receive that back soon. Unfortunately I don't know whether that will be the one we give to testers until we've tested it so I don't have an ETA. It's in the works though!

Have you by chance put it into AP mode? If so, this disables all features of DumaOS and the router just behaves as an access point. From memory, I believe this setting is in Network Settings -> Setup -> Router mode

The firmware that was mentioned on the firmware progress page was for you, but was not released presumably due to issues found in NETGEAR testing. That's unrelated.

The former: Source 1-65535 and Dest 1024 - 65535 Generally you can always leave source as 1-65535, then just set Dest to the ports you want to prioritise.

OK not to worry, thanks for letting us know. We'll stand-by until you've got the logs!

There doesn't appear to be anything in there that suggests a problem, apart from one feature not responding to a monitoring app. Although that feature shouldn't bare any relevance to a disconnection. It's worth also noting we're expecting to start testing a new XR1000 firmware soon, there have been multiple issues identified and resolved with the version you're running currently. I'll pass your logs on to a developer to see if they can see anything we can't.

That'd be really helpful, thank you. Can you think of any kind of activity or time during which these drop outs seem to occur? For example, are you gaming, working from home or streaming video content that may be prioritised through Network Priority at the time of the disconnections? Are there any other kind of patterns to the disconnections that you can think of?

That's what we're doing, it's not just a case of giving you the same file due to the aforementioned hardware change. It's negligible, the hardware affected is now replaced with an equivalent as far as I'm aware.

I see, thanks for letting us know. I think in this scenario logs would really help us, if you can grab those next time the problem occurs, send them over and we can get a developer to look into it.

Vielen Dank für Ihr Interesse, dies in der App zu haben. Ich habe keine ETA, wann wir es in der App unterstützen werden, aber wir planen, dass alle Funktionen und Einstellungen, die in der Desktop-Ansicht verfügbar sind, in der App unterstützt werden. Spielekonsole ist der Dienst, den Sie dort auswählen sollten, Call of Duty wird das unterstützt.

Over the last few months, there were supply issues with the XR1000, meaning we had to quickly prepare new firmware for a slightly-modified hardware version. Now that's tested, we're expecting to receive and start testing an XR1000 firmware for current units (I.e the one you have ) within the next couple of weeks.

Not currently, can you go to System Information -> click the three-line menu in 'Installed Rapps' and set the number of retries to 5. Then reboot and see if the issue occurs again.

Welcome to the forum! Thanks for all the information you've provided. On the first issue, are all devices disconnecting or is it just Wi-Fi devices disconnecting? Are you able to access the DumaOS interface from a device while the disconnection is occurring? Are there any log entries around the time of the disconnection? It's worth mentioning if the R2 reboots, the logs will be cleared, so you'll only see log information from the time of the disconnection if the R2 did not lose power during that time. On the second, that is a bit of a strange one. If you change the channel width, do you then see more channels? Even if you simply change it, then change it back? For the third, which kind of devices specifically are connecting to the R2 from the third room? Or are we talking about a mobile device that moves between rooms and simply doesn't receive great connectivity when in the third? Do you know if this device/devices are connecting to the 5GHz Wi-Fi or the 2.4?

The exact command you should be using is: tftp -i 192.168.1.1 put XR1000-V1.0.0.64_1.0.49.chk If you get an error message with that, can you please show a screenshot of the error?

Wenn Sie den Datenverkehr von der PS5 per VPN übertragen möchten, fügen Sie ihn zum Fenster „VPN-Datenverkehr“ hinzu und wählen Sie „Diese Dienste nicht per VPN verwenden“. Fügen Sie dann keine Dienste hinzu.

Wenn der erste Schritt abgeschlossen ist, müssen Sie keine Ports eingeben oder eine Portweiterleitung durchführen.

OK, vielleicht ist es in diesem Fall nur ein Front-End-Bug. Wir werden es prüfen. Woher bekommst du deinen NAT-Wert? Im Spiel? Scheint es die Leistung zu beeinträchtigen oder sind Sie nur besorgt, dass es nicht als offen angezeigt wird? Wenn Sie das VPN und sonst nichts deaktivieren, kehrt der NAT-Typ immer zu Open zurück? Könnten Sie ein paar verschiedene VPN-Server ausprobieren und sehen, ob die Ergebnisse immer gleich sind?

Wenn Sie auf der Geofilter-Karte nachsehen, sehen Sie ein Serversymbol in Mainz? Wird dieser graue Kreis rot, wenn Sie anfangen, ein Spiel zu spielen? Machen Sie sich keine Sorgen, der Geo-Filter ist weiterhin aktiv und funktioniert für Ihre PS5.

Hey everyone, As we continue to work on improving our new DPI system, we're now looking to add as many of your favourite games/applications as possible. If you have a game you like to play or an application you use that's not classified in DumaOS' DPI system, please fill out the below form so we can get it supported for you. https://forms.gle/X4A9R4rikDMa3Wzq5 Thank you all for your help! Liam.

Not to get you all too excited, we're just assembling a small group of XR users to test out the latest firmware once it's ready. If you can send me a DM to let me know if you're interested, we'll note your name down and let you know if/when we've added you to the group.

@Dialatech @ryekye @Stilts29 @dv_boy @DMaR I've sent you all a DM.

Thanks, we'll make sure they get an update done today. Resycn cloud later on today and you should see servers again.

Interesting, can you export a log and send it over to us so we can take a look?

Grazie per avercelo fatto sapere, lo passerò al team!