Netduma Fraser

Gracias, todo parece estar bien. ¿Podrías cambiar el canal a 5 GHz y solicitarlo, por favor? Luego vea si funciona. Básicamente, eso lo reiniciará, así que espero que funcione.

17 is very good, is it a consistent ping or is it fluctuating, spiking up and down? Could you provide a screenshot of a completed Connection Benchmark test as well as your QoS page please?

Muy extraño, ¿lo ves en algún dispositivo? ¿Puede proporcionar una captura de pantalla de la página de configuración de WiFi, por favor?

What's the ping you're getting on the Geo? As in the specific profile button? If so I think we're removing that as it doesn't really do much, just changes the radius size

¿Se ha desactivado al presionar el botón del enrutador? Posiblemente por accidente, tal vez por un gato, por ejemplo.

There is a more up to date firmware so upgrade to that, close the tab, wait 4 minutes then see if it loads https://kb.netgear.com/000065541/XR1000-Firmware-Version-1-0-0-68

¿Smart Connect está definitivamente desactivado? ¿2,4/5 GHz tiene exactamente el mismo nombre en la configuración de WiFi?

A VPN could potentially help with the ping if it has better routing to the servers but you can't beat physics so the ping would still be high and as above may be too high to get a game. Both the servers you mentioned are quite hard to force but I'd say I've seen more people able to connect to the Spanish server

Upgrade to the last original firmware: https://www.dropbox.com/s/701ezvt4qmezdgu/R1-v-1-03-6j.sig?dl=0 then once that's completed then try the upgrade to DumaOS

Where is it you're actually located? CoD may have an upper ping limit where it won't let you connect to a game if your ping is too high

Yes I believe so

I replied to it a few hours ago: https://forum.netduma.com/topic/52323-this-rapp-is-not-yet-loaded-when-trying-to-access-the-dumaos/#comment-383210

What platform are you playing on? As long as you add the device there isn't much you need to do specifically, just make the radius settings you want and play

Okay that makes sense, DPI is what Adblocker relies on to inspect packets and see whether it needs to be blocked or not. The description is outdated as it was written when there was only the disable QoS option which also disabled DPI. I'll pass it on to the team to get that description updated.

Mientras está conectado a través de Ethernet, desactive las radios WiFi por completo desde la configuración WiFi avanzada, reinicie el enrutador desde la interfaz, espere 2 minutos, acceda, habilite las radios WiFi, aplique, reinicie desde la interfaz, espere 2 minutos y luego vea si aparecen y si es más estable a partir de entonces.

Yeah so disable DPI, does it stop working then?

Sim, atualmente é o firmware mais recente

De forma predeterminada, 2,4/5 GHz se combinan en un nombre de WiFi y luego los dispositivos cambiarán automáticamente entre bandas según sus necesidades. Si desea conectarse manualmente a 2,4 o 5 GHz, deberá desactivar Smart Connect en la configuración de WiFi.

Unplug the router from power for 10 minutes, close the interface, plug in, then wait 4 minutes, then try accessing, does it load correctly then?

No it's not a typo, it doesn't work without QoS enabled, it may be that now there is the separate option to disable DPI that it doesn't work when that is disabled also

Desactive QoS completamente desde el menú Control de congestión, ¿qué obtiene entonces?

As above a new version coming but if you reduce the upload to 50% for example do you still get that issue?

As above, also yes you'd put the R2 WAN IP in the DMZ on the ISP router and make sure all devices are connected to the R2 for an optimal experience

If you can access to get the log you should be able to perform a factory reset from the interface does that stop the issue happening?

What's the issue you're having exactly?