Netduma Fraser

Try this, remove the console from the Geo-Filter and in the Device Manager change it to a PC then re-add it to the Geo-Filter, does it work better then?

È normale, non sarà sempre possibile eseguire il ping di un server

Los idiomas no son un error, es una característica y llevará tiempo traducir todo a diferentes idiomas. La VLAN funciona, es posible que no alcance 1 Gbps si tiene esas velocidades, pero está funcionando. Si el equipo puede aumentar esas velocidades, lo harán, pero es probable que primero se prioricen otras cuestiones: acaban de regresar de las vacaciones.

Yes that's right and if you do remove them they should come back I suspect once the devices start using traffic

Yes that's exactly right

Have a look at Ping Heatmap to find the ones around you and what kind of pings they have then make a decision based on that

What firmware version are you on at the moment? I know there was an update that improved speeds, you may be past it already though

I've sent you .23 in a PM, you can install it in Settings > Troubleshooting. Once it's complete I'd recommend doing a factory reset to ensure remnants of previous versions aren't causing any issues, then see it works better

It won't be doing anything at 100 so try 70 and experiment from there and you should notice a difference

You already have a port rule added, what was that one for?

Great to hear that, thanks for the update!

Does it show the ping graph with the upper limit being 50 at all or 27?

It's timing out, how far away from you is the server you're trying to connect to

Everyone will have the issue, will require an app update to resolve

Disable QoS fully from the Congestion Control icon including DPI, what speeds do you get then?

What percentages are you using specifically for Congestion Control and do you notice any difference after adjusting them? We usually suggest starting at 70% and experimenting from there

You're likely on an old version, I've sent you .23 via a PM. You can upgrade from Settings > Troubleshooting. Once the upgrade has completed I'd recommend doing a factory reset and it should work better after that.

Make your Geo-Filter settings, then restart game or wait 10 minutes (in the lobby in the game). If that doesn't work, reboot PC/Console and it should work then.

Können Sie mir die Option auf der Schnittstelle zeigen, die Sie zum Neustarten verwenden?

Sur quelle version du firmware es-tu actuellement ?

If you're unable to connect to them even with the Geo-Filter enabled then it's likely for the reason I mentioned. Try direct to your modem as well

It could also be found in Security or Firewall settings on the gateway

I'd remove the PC from the DMZ, it's basically open to the internet so a major security risk. Good advice from Dogg on this. It shouldn't matter but some routers are different, disable UPnP, port forwarding, QoS, any other features on the G3 that could be affecting the traffic. NAT Type 2 is open, Type 1 means you're connected to a modem and isn't possible to achieve behind a router

As above, that's how you do it!

I'm not too surprised, those antennae are pretty chunky! Very interesting though, how much range was gained approximately?