Netduma Fraser

Unplug the R2 from power, wait for 30 seconds, hold the Factory Reset button, while continuing to hold plug the power back into the R2 and keep holding the reset for 30 seconds then release. Wait 4 minutes, then try accessing please and see if you can go through the setup wizard and keep a connection.

Its an allowed server, either done by yourself or done by us as it'll be required for online play. You can see the legend for the icons by clicking the and clicking legend by the way

You can remove the DMZ as you should be able to get Open with that NAT Filtering option set to open

Ahh glad you were able to get it sorted. Recovery page for the interface password?

Exactly as above, we never really launched it fully, it's available on the latest firmware section of the forum

See if these suggestions help: Split the bands, give 2.4/5GHz different names and apply - you'll want to connect to 5GHz specifically for speeds Use a WiFi analyzer to find the least congested channel and change to that Experiment with the widths to see what gives better results Ensure it's in an elevated position - not on a metal surface Ensure there aren't any electrical / wireless devices e.g headphones etc within close proximity ~3 feet if possible Set the antennae to this position _ | | _ We will be improving the WiFi where possible

It has been suggested so it's on the list for potential inclusion in the future

A reboot should get you sorted on this one

Great, let us know how you get on!

It should automatically add with the console service

I'll get a dev to take a look at the log and see if they can tell what may be happening and get back to you

Access using 192.168.1.1/adv_index.htm then reboot from there, close the tab, wait 4 minutes then access normally and see if it loads please

As a test could you put the PC in the DMZ and then check? Once done remove it as it is a security risk

Keep in mind the purpose of the router isn't to force away far away servers and as such it's not always a guarantee it will work, especially with your ping being higher there is a greater chance the game will just stop you connecting. Try this: Quit the application/game/client completely Remove device from the Geo-Filter Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client Then see if it works more consistently.

I can't see anything in the logs that would be causing that to happen that frequently but it does appear to be having trouble on some occasions getting the WAN IP from the modem - you said it's a DSL modem but just to be clear is it a pure modem i.e. no WiFi?

I'm not falling into that trap again! I won't be giving out any ETAs, once available we'll let people know

That's great to hear, technology can be weird sometimes! Glad it's working now, thanks for the update!

I've removed the firmware above but I think the next one will fix that for you

It might be an issue we're aware of, if so it'll be fixed in the next one, otherwise is the PC you're using it with on the Geo-Filter? I've removed it for the moment while we fix issues

Okay they look fine, any lists that are bigger add them with HTTP rather than HTTPS

Ah no worries! Try what I mentioned before and see if that helps

I removed it today, I've sent it to you in a private message. What do you mean don't know how to get the app?

Reboot the router, can you then enable adblocker after that? What were the lists you added?

Get through to the interface, do a factory reset from there, wait 4 minutes before accessing then try it again please

I've sent you the file via PM