Netduma Fraser

The R1 hasn't had an update for quite sometime and won't get DumaOS 4. The R2 next update will likely be DumaOS 4 but it won't be soon. Only the R3 has DumaOS 4 currently.

Just to double check ONT (LAN port) > (WAN/Internet port) R3 (LAN) > (WAN/Internet port) R6 is that right? What mode is the R6 in?

We can certainly do that, if you provide the IDs as well that will help us do it faster

What is the model of the Room A router?

Go to the System Information page and then in the Rapp panel menu ≡ change the retries to 5, reboot from the interface, wait 4 minutes before accessing and see if it works then please.

Yes it does have a VPN service integrated but it's used for accessing your home network while away from the network. I believe HVPN will be in the upcoming firmware. If you're not changing anything and the ping is going up like that I suspect that it may be peak time congestion/congestion in your area. If you play during off peak times do you get the lower ping more consistently? Good to hear I was right about the CG-NAT!

Change the type back and then see if you can load the page

Did you by any chance delete the device from the Device Manager that was added to the VPN page? I think a proper reset will be needed unfortunately

There are extra features for the Geo-Filter on 4, completely redone QoS as well and overall enhancements/design changes. It really depends whether the extra cost for that is worth it for you

You can do that if you want to yes - if you just want the Geo-Filter then you could get any really

Shouldn't make a difference unless one of those servers is outside your range?

Yes the room A router, what is that? Ideally you should just use the ISP modem + R3 - is there any reason for another router being used?

If you disable the Adblocker on the router does it work then?

Yes all the XR routers will be on 3 or 3.3. I'd be biased and say the R3 as it will have future feature updates whereas the XR range won't but what are your requirements?

DumaOS 4 will not be coming to any XR routers. I would not recommend the XR300 personally - it's no longer manufactured and has the oldest firmware version out of the XR range.

There will be no one setting that everyone will get the same results with, you'll need to experiment with the Download/Upload percentages on Congestion Control until you get the best values possible

If you check specifically one of the URLs it should block does it block at all?

In your ideal scenario, the other router that you have connected to the R3, what is the model of that? Is it in the DMZ on the R3?

The in game ping can add processing delay which can account for the difference. If they're in the zone but won't connect it means the game doesn't want to connect for whatever reason - check with the Geo disabled and see if you can connect to those ones

Does the PC itself have a static/reserved IP set at all? As there is no reason one device would work but another doesn't, assuming the ethernet cables are fine

It's acting like a switch in that scenario, that's normal. Have a look at the IP/settings that are being used when the R1 is connected to it, then mirror that to the XR and see if that then works - change the IP though so if the R1 is 192.168.0.2 have the XR be .3 for example

It's not a scam, just delayed as can happen with development and working with another company

Very bizarre but good to hear, thanks for the update!

What do you mean by all room ethernet, multiple devices in the same room that are connected via ethernet? The lights won't always appear white if there is no traffic - do the devices actually work via ethernet?

You can ignore the top part, it's the bottom graph that is important and you're not receiving any packet loss and the ping looks stable. What is the average ping on the Geo-Filter/in game? What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode