trying to fix lagcomp expiriment

[alex.devine]

@blackfirehawk Please, could you explain how you enter the ports? what is the process?

 

Also what settings are you using in the Geo Filter?

 

Thank you in advance

[kinel]

43 minutes ago, alex.devine said:

@blackfirehawk Please, could you explain how you enter the ports? what is the process?

 

Also what settings are you using in the Geo Filter?

 

Thank you in advance

On the first page alex therrs a  link for that will show you how to do it

[kinel]

The way ghost does it alex is the best way

But my router i dont think can do it ghosts way

Again im not 100 % sure on this as i cant check it out because im on oldet firmware

 

[kinel]

If i was you guys i woukd put the ports in traffick prortization in ranges  

Thats if you have no  way of indenifying the ports the games uses for youself

You could put them indavidually  the pirts i have listed in the link on first page 

But there ar loads to  put in 

So it might take ages to do them all

Plus these are the ports i found and work for me   yours might be difrent 

 

[kinel]

Thees a few ways to do it

Ghosts way my preferdd way but hardest to do 

Source port 3074-3074  destination 30550-30550

Destination 3074 -3074 source 30550-30550

He puts the ports kn indavidually  but if you dont know what ports you need its hard to do this

 The second way is 

Sorce 3074-3075   destination  1-65535

Source 1-65535   destination  3074-3075 This is the easist way

 

This should cover all the ports the game uses the ones below

The 3rd way i think you should do is ranges

source 3074-3075  destination 3100-3500

destination 3100-3500   source 3074 - 3075 

source 3074-3075 destination 30000-45000

Source 30000-45000  Destination 3074-3075

Sorry i cant take a  screen shot of traffick prortization  as i am nort on the same firmware  as you guys

So i am wtiting it  instead 

Sorry if the layout is diffrent  but im doing it from my memory

[blackfirehawk]

2 hours ago, alex.devine said:

@blackfirehawk Please, could you explain how you enter the ports? what is the process?

 

Also what settings are you using in the Geo Filter?

 

Thank you in advance

 

[kinel]

If any one found this helpful please can they vote on  a poll on page 1 on this topic

Because  you guys could easily get the ports the game uses for yoursels in the older firmware 

But they have took out of the new firmware 

So i have been trying for over a year to get it put back into future updates

Thers a poll there so you can vote

 

 

[kinel]

Blackfirehawk you have  a little mistake on the 3rd rule i think 

But i might be wrong it looks like your destination  rules are off  a tinybit

youve written in 3200 -3200 

Shouldnt it be 3000 -3200

 

[alex.devine]

@blackfirehawk and @kinel You guys rock, thank you kindly for taking the time to share.

I have been messing and thought that was correct, my games have improved massively since messing with the ports.

@kinel Vote cast to include

[blackfirehawk]

9 minutes ago, kinel said:

Blackfirehawk you have  a little mistake on the 3rd rule i think 

But i might be wrong it looks like your destination  rules are off  a tinybit

youve written in 3200 -3200 

Shouldnt it be 3000 -3200

 

you are right.. my bad

 

3074-3000 to 3200

togehter with

3000-3200 to 3074 

gives me a error .. invalid overlapping

i editet it

[kinel]

Cheers alex

Btw for some people it shows some ports the game uses  in the upnd settings screen thats whee  i got the lower port ranges from

 

 

[kinel]

Alex could you please tell me what your ping to your dedi reads on dumar for cod mw

When you get the right ports you melt people you can istantly feel it 

[alex.devine]

Hi, I will check that and report back

I am not seeing red on the High Priority Traffic Detected, should this be red?

[Netduma Fraser]

11 minutes ago, alex.devine said:

Hi, I will check that and report back

I am not seeing red on the High Priority Traffic Detected, should this be red?

Change the rules to keep the source ports default 1-65535 and keep the destination ports the same as above and see if that works.

[Crysister]

I fixed the game by uninstall....

No more problems!

[kinel]

It should be red when your in a game

[alex.devine]

1 hour ago, Netduma Fraser said:

Change the rules to keep the source ports default 1-65535 and keep the destination ports the same as above and see if that works.

@Netduma Fraser I get: Unable to install because streams overlap.

P.S Why do I need to reset my password every time the forum logs me out?

 

[Netduma Fraser]

36 minutes ago, alex.devine said:

@Netduma Fraser I get: Unable to install because streams overlap.

P.S Why do I need to reset my password every time the forum logs me out?

There will be some overlap in the destination rules you've done for example 3074 - 3075 isn't needed as it's covered by 3000 - 3200.

If you have a different display/username then sign in using the other one and it should work fine.

[GHOST-1-EC]

1 hour ago, kinel said:

It should be red when your in a game

@alex..devine the traffic prio light will come one once you launch the game..... it only activates once the communication to the prioritised ports on the game server end is initiated.

When you close the game, the traffic prio light will remain off. 

I would suggest not using large range priority rules - if u are located close to where some of the users are who have successfully prioritised their ports then you can use their rules - if the light comes on then you know that you have the correct ports prioritised. 

 

[kinel]

Alex divine if you copy the way i show you in the 5th post down on this page that might work

You shouldnt get any overlaping ports

Again thisis from memory  as i am not on same firmware  as you guys 

So sorry if im not 100% sure but try that way 

I posted 3 ways to do it  i would use the 3rd if i was you as you dont know your exact ports

[alex.devine]

Hi All,

Thank you very much for all your help, it is really helping

Here is a pic of my settings based on what @kinel it saying!

@Netduma Fraser Thank you, Username issue resolved  

 

[kinel]

Alex the first rule seems wrong to me

You put in 3100 -3100   as destination

I think it should be 3100-3500 as destination 

All the others seem good to me

[faulko]

6 hours ago, kinel said:

 The second way is 

Sorce 3074-3075   destination  1-65535

Source 1-65535   destination  3074-3075 This is the easist way

For shits and jiggles and because i like to fiddle with things i tried this last session.

And id have to say there was a definite improvement to the hit registration.

Still the odd WTF moments but definitely better.

About to try this now:

The 3rd way i think you should do is ranges

source 3074-3075  destination 3100-3500

destination 3100-3500   source 3074 - 3075 

source 3074-3075 destination 30000-45000

Source 30000-45000  Destination 3074-3075 

[alex.devine]

3 hours ago, GHOST-1-EC said:

@alex..devine the traffic prio light will come one once you launch the game..... it only activates once the communication to the prioritised ports on the game server end is initiated.

When you close the game, the traffic prio light will remain off. 

I would suggest not using large range priority rules - if u are located close to where some of the users are who have successfully prioritised their ports then you can use their rules - if the light comes on then you know that you have the correct ports prioritised. 

 

@GHOST-1-EC Not getting the light at all, the game open or closed

Anyone in the UK got a list of ports?

[kinel]

Im from uk btw you could add 9308 udp

I forgot that one but i think thats for psn

 Alexdivine did you change  your first rule

As i explained in the  post above

As i did say i think you have it wrong

Faulko please vote on the thread i posted if we helped you out

Also alexdivine please vote as well

If this helped you out