DARKNESS

@johnwesleyThat already a feature it just dmz it not going to appear as nat type 1 unless your connected straight to the modem.

What firmware version you running? Best method is to DMZ but that’ll leave you vulnerable so I recommend it for console users only.

Do you have the channels split into two just in case your printer is not compatible with certain frequency? Referring to 2.4Ghz and 5ghz

I don't read through a log forum it not my job I just try to help have you tried setting a static IP to the device and make sure your not running a vpn during the procedure. The suggestions below should help if you are continuing to connect to servers outside of your radius. * Disable GeoLatency * Disable PingAssist (set it to 0,0) * Enable Strict Mode * Disable Fast Search * Remove device from the Geo-Filter * Re-add the device to the Geo-Filter Then restart the game if that doesn't work, reboot PC/Console

@paganisterDisable geo latency and block the servers that are giving you high ping, the ping graph is not 100% accurate therefore always check the game ping in-game.

@masparevenFrom what am aware XR1000 doesn't have HVPN so you can't use your own VPN at the moment till the feature is added. @Netduma FraserCorrect me If I am wrong but I am sure am correct....

@cedric108Do you have your XR1000 in AP mode? I do believe it been reported that the wifi is weaker so it something there working upon still...but overall stability has been improved however if you use the XR1000 or an access point you should be able to get full speeds if it top grade quality such as the XR that been tested more heavily in wireless communications environment.

I beg to differ as were the ones testing whether there working so if we don't know what's being updated then there no guarantee that they work 100%. I'd say you can keep adding the changes (DPI) to the early access forums but that optional.

@Netduma Fraser@Netduma Alex Application name: Apex Legends Device type used for capture: MACOS/PS5 Any other comments: PS5 VERSION NOT DETECTED https://store.playstation.com/en-us/product/UP0006-PPSA04873_00-APEXLEGENDRSPWN1/ To add it detected only during the login menu APEX SOLOS.pcapng Apex Firing Range.pcapng APEX TRAINING.pcapng

@Netduma FraserJust a heads up update the latest firmware list and the netduma site

You don't need the ping heatmap generally the lowest ping servers are always going to be within 500-800 mile range from your location.

@DewildragonAWDo you have upnp and dmz disabled?

@LucidIs this also occurring when your connected straight to your modem?

@SunkinIf you can't find one just buy yourself a universal plug should be cheaper/easier than finding a compatible adapter.

Wouldn’t recommend using the R2 adapter as it uses different voltage which may turn on the router but it will affect the router when using higher amp so it will shut off or cause damage over time. The specifications should be 12V, 1.5A if you have another adapter with same specs you can use it just don’t use one that has higher voltage however you can use one with higher A.

@Cajun72Actually I take back what I said it seems like you can't change regions so your basically stuck on region locks which of course means if your on an area that has zero players or low amount of players the servers would be in short dead. I believe this will be fixed but the only alternative at the moment would be using a vpn to change regions. There have been users in other regions complaining about that as asia servers are dead at the moment.

The hit detection is ass on that game I be shooting kids point blank with a shotgun and nothing. It seems to me that the hit detection is based on distance that would be awful and make the game more or less AR dominant from my internal testing. So in short netcode might be bad unless it some sort of bug with overlay character when in close range test it yourself and you’ll see once in a blue if your point blank ur shot won’t register. There also a Reddit post on this topic so we’re clearly not the only one’s experiencing this issue might be sorted though who knows.

Works fine buddy I've tested it I wouldn't follow some vague map just use the geofilter and figure it out like that...

@snakeplisken47Should be fine the best option with your following setup would be Modem>R3>Asus in AP mode

@SamT98Did ya check new version?

@snakeplisken47 Well when it comes to controlling what servers your connected to geofilter is primarily the best option there are some alternatives but only on PC and there not that great or give you much control from what I know. I'd say when it comes to wifi range netduma won't meet your demands if you expect it to be on a large household so the best option would be a mesh system. For network optimization you just have to try it and see if it works for you as everyone has a different experience on my end it does the job however you need to tinker manually to get the best optimization as every other router but it more or less automated for convenience for those that aren't too tech savvy. To note if you were to set it up I would have it as the primary router but if your just using it for the geofilter then sure you can set it up as a switch. Note I am not affiliated by netduma I am just a consumer the admin will elaborate when he gets on which I believe is tomorrow.

Try this: 1. Quit the application/game/client completely 2. Remove device from the Geo-Filter 3. Resync from the Geo-Filter Map menu 4. Re-add the device to the Geo-Filter with the manual option 5. Set up the Geo-Filter how you like 6. Wait 2 minutes 7. Boot up application/game/client Then see if it works.

@snakeplisken47So what exactly are you looking for? An access point/mesh system or network control device?

You have to be in the match for it to be active not in lobby....

Should work fine