Netduma Fraser

Thanks for that! As we have some time until Monday can you sign up for Early Access here: https://forum.netduma.com/topic/39415-introducing-early-access/ then when approved upgrade to the firmware in the Early Access sub forum, followed by a reset and see whether it's resolved please?

Thank you, that's a pure modem so that's fine, did you make this post while connected to the R2? Reason being we can see the IP address you used to post so if that's correct we'll use that on Monday to connect.

Ah, that makes sense, Traffic Controller isn't to open ports, it's more of a parental control feature, so essentially you allowed all the ports which bypassed the blocking functionality of the Geo-Filter.

Could you download the DumaOS app for mobile, then play a game and see if the server appears on there?

You could always try a different VPN provider and see if that works

Could you ensure the R2 is in the DMZ of the modem if applicable and enable remote support in WAN Settings, then we can remote in on Monday and take a look

Do you reboot the console after switching over the router or do you just reconnect? Could you make sure to reboot it then see if it appears properly on the R2 please

Voila: https://forum.netduma.com/topic/39415-introducing-early-access/

El propósito de QoS es eliminar bufferbloat - retraso causado por la congestión local, ayuda a mantener su red lo más estable posible, si ha ajustado eso tanto como sea posible y usa el Geo-Filter para asegurar los servidores más cercanos, entonces usted' He hecho todo de tu parte. Si todavía hay problemas de retraso, será con el módem, el enrutamiento que usa su ISP o el servidor del juego. El enrutador no puede garantizar una gran conexión en cada juego, hay muchas variables cuando se trata de redes, todo lo que puede hacer es optimizar su lado tanto como sea posible y hacer un seguimiento con el ISP si hay problemas que lo afecten.

¿Está experimentando congestión local, retraso causado por otros dispositivos en la red que se está utilizando? Si no es así, es poco probable que note alguna diferencia y, si eso ocurriera, QoS evitaría que lo afectara. Si está haciendo bien su trabajo, es posible que no notes nada.

Are you using a VPN? Is the console connected directly to the router or are you using a switch/AP/extender?

Try putting the whole device behind the VPN instead, if it's not working through the normal client then it's likely they're banning VPN IPs

Try this: Quit the application/game/client completely Remove device from the Geo-Filter Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter with the manual option Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client Then see if it works better.

Great to hear that, thanks for the update!

I wouldn't have thought so, how have you added the PC to the VPN exactly? I do think they may be cracking down on VPN IPs.

Put Ping Assist to 0 and search for a game again and see if that improves it

Hey, welcome to the forum! Thanks very much for the photos, so it looks like the internet port and a LAN port are limited to 100Mbits which will be where the issue is coming from, try a different cable connecting the R2 to the modem and another for your LAN port and see if you get faster speeds then.

.166 is the latest so go for that one

Could you clarify what you mean exactly? You said you had an isolated network on the DumaOS routers but does that mean you have devices connected to the livebox?

Sign up for Early Access as well so you can try it

Sign up for Early Access: https://forum.netduma.com/topic/39415-introducing-early-access/ Once approved you can try the firmware there which should be more stable.

Can you provide a screenshot of your Geo-Filter page showing what you see when you get a higher ping server? Where is it you're located approximately?

QoS will be the main thing to change if you're using this

Do you have the Allow us to collate data enabled in Settings? On your web browser could you access and remove any devices/polygons you've made, then retry accessing using the app please?

It's worth trying different options, the XR1000 has hardware acceleration for example so the same settings won't necessarily be as effective on both