Netduma Fraser

It's not necessarily the beta, we've seen it with the public versions as well and only on the 700, try this: While connected via ethernet, disable WiFi radios entirely from the Advanced WiFi settings, reboot the router from the interface, wait 2 minutes, access, enable WiFi radios, apply, reboot from the interface, wait 2 minutes then see if they appear.

Yes you can

No it should be RC14 which you can find here: https://forum.netduma.com/topic/51611-new-xr500-beta-firmware-33535/

Do a factory reset now, it's quite a big change, it should be fine after that

Which firmware were you on specifically when you couldn't access? Are you on the intermediary firmware?

I've not seen the issue happen for awhile, it may be worth trying the beta version here: https://forum.netduma.com/topic/51611-new-xr500-beta-firmware-33535/ We've not encountered anyone using those devices so far, I wouldn't have thought so. If you're using Smart Connect it may not like the automatic switching between 2.4/5GHz, usually smart devices just want to be connected to 2.4GHz.

Great thanks, I'll pass that on!

I can make a request for it, I couldn't say when/if it may be included. The R2 does have its own Adblocker you can use and add different lists to.

It's not something we've developed/people have requested at all, Netgear also don't have the option

No way to set it on LAN, you can set it for WAN, it will show you the IP you need to enter there: https://github.com/AdguardTeam/AdGuardHome/wiki/Getting-Started#configure-devices

No not yet unfortunately, I don't think its an easy fix

Nope you have access, it's public, just follow the instructions in the first post. No list currently, Adblocker is entirely created by us, not using another solution.

Looks like it's because your timezone isn't correct, it's expecting UTC -8, you may need to toggle DST for the time, then when Sys Info shows the correct time it should be fine

Realmente ha hecho una copia de seguridad en este momento para revisar todo en busca de actualizaciones, lo hará tan pronto como pueda.

We don't have any specific recommendations, any that support your speeds and have a WiFi standard you would benefit from will be good.

I'll check in with Alex and see when he may be able to do so.

Yes that's the latest public version

Ahh, the first time you signed up you marked No to owning an R2, so we didn't grant access. I've given you access now, the above link will work now.

In LAN Setting, set the DHCP range to start at .50, then assign reserved IP addresses to devices between .2 & .49 so they're out of the DHCP range, apply, reboot from the interface, wait 2 minutes and see if that stops the disconnects.

It's possible routing in your country changed, you can try Smart QoS now if you want to, you'll need to sign up here: https://forum.netduma.com/topic/39415-introducing-early-access/

In theory you should be able to do that yes. I'm not sure in regards to VOIP but toggling the SIP ALG option in WAN Settings if it isn't working may help.

It'll be a topic with the title "NEW XR1000 Firmware" or something similar and will be pinned to the top

Looks like the first was due to a Traffic Prio rule and the second PPPoE which we know about, hard to say about the reddit one with more information. I'll see what the team says about your log.

Thanks for your comments, I'll pass it on to marketing as it's something they would have a look at and confer with devs etc

We don't give out any ETAs, there is a new firmware on the way which shouldn't be much longer, no sure if it includes a fix for that or not atm. Just keep an eye out on the Nighthawk Support sub forum here and we'll post it there.