Netduma Fraser

Any should work really, there are no specific requirements for compatibility

You change DNS in Advanced WAN Settings, you don't need to use the router address

Added

DNS is in Advanced WAN Settings. What do you mean a static IP for DNS?

It's impossible to say as it depends on a lot of factors but I'd guess that it probably wouldn't

Added

I'd suggest using this guide while downloading instead as the results will be more real world and you can optimize from there https://support.netduma.com/en/support/solutions/articles/16000074717-how-to-test-your-internet-ping

Added

Good to hear, thanks for the update!

Can you access just fine through a PC/web browser including the mobile web browser?

I'm not a lawyer and I'm not familiar with how UK vs Canadian law would work. You can email [email protected] and I can pass it up the food chain. Make sure to include a link to this topic so we know what it refers to.

I don't think it's been specifically fixed but I've given you Early Access just in case and so if it isn't fixed then when it is you'll get to try it as soon as it is available

Added

Added

Added

I've added you so you can take a look in that section

How long are you holding the reset button for? If it's not long enough it'll just reboot. Hold the reset for 30 seconds, release, wait 4 minutes then access and use admin / password if needed

Added

Are you able to access via the DumaOS app at all?

Added

You can see the new section on the main forum page: https://forum.netduma.com/forum/151-netduma-r3-early-access/

Right-click on the Network/WiFi Windows Network Icon on the PC on the bottom-right hand side of your screen Open Network and Sharing Center. Click Change Adapter Settings. Right-click your connection and go to Properties. Uncheck the box next to Internet Protocol Version 6 (TCP/IPv6) to disable it. Then try accessing the interface and see if it works please.

Added

Did you reboot the router or anything while it was upgrading? While connected to the router via a Windows PC, open command prompt, type ipconfig press enter and then post a screenshot of the results here please.

What do you mean you have the R3 in DMZ mode? - Do you mean you have your gaming device in the DMZ on the R3 or you have the R3 in the DMZ on the ISP modem/router as you'd definitely need to do this one at the very least if applicable like the above.