Netduma Fraser

We post in Early Access fairly regularly, public updates will be the slowest as we only want the most stable versions to be public. I've added you to Early Access: https://forum.netduma.com/forum/151-netduma-r3-early-access/

Added - it has been temporarily removed.

Yes that's correct, ahh that's great to hear, no worries at all!

Sorry to hear that, the DHCP steps I mentioned before should resolve the disconnects

Added

You have to have filtering on otherwise it's not doing anything

Added

Added

You need to set Ping Assist to 0, reboot the gaming device and try again

Can you provide a video of this turning issue? It's not really a networking issue for us I don't think, no reason network wise why that would be worse. The LAN cable issue is a common one for the PS consoles, never heard of this turning one though

No worries, it's probably a simple fix!

I've given you access: https://forum.netduma.com/forum/151-netduma-r3-early-access/ I doubt the firmware itself will fix the issue, can you provide a screenshot of the full Geo-Filter page showing what you see when this happens please?

Is that the public version you're on or the beta? If you're not on the beta then please upgrade to that: https://forum.netduma.com/topic/51611-new-xr500-beta-firmware-33535/ If it doesn't work could you record a video showing what you see please?

Added - it has been temporarily removed.

Are you using PPPoE/VLAN or IPv6?

What router are you using and what firmware version is it on? Are you accessing via HTTP or HTTPS? Make sure it's HTTP and the browser isn't forcing it to use HTTPS

Good to hear, make sure you check the DMZ again, as you've reset it's likely the WAN IP has changed, that should help with the turning issue. That's super weird but makes sense why a lot of people have it, thanks for the update, I'll definitely keep it in mind!

Added

Added

Great to hear that, thanks for the update!

Okay great, lets ignore waveform then as we can't rely on that currently to report accurately. There is likely some settings that are restricting the speeds. You mentioned you had the issue after a factory reset, is there anything you changed right away upon getting into the interface or did you test right away?

Here is a guide: https://www.vodafone.co.uk/cs/groups/public/documents/contentdocuments/vfcon090499.pdf then put the R2 WAN IP in it. What do you mean it can't connect to the internet exactly? You don't need internet to access the interface

Great to hear that, thanks for the update!

How have you set the powerhub to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode Could you try WiFi just to see if you get the same issue?

When this happens are you going away at any point and the console goes into standby/instant on mode and then when you play again it stops working?