kinel

Topic Deleted

Latest public release yes, check the home page of the forum for the latest. You're very welcome!

We haven't specifically tested that provider but it should as long as the template above is followed.
It will get the DPI cloud update yes.

@kinelMake sure the ISP service lines are in good condition and operating at ISP specs first and foremost. Have the ISP check all lines and signals up to the mode you end up with. Work with the ISPs for signal and line issues and such on that side of the fence. Modem only device is recommended if you get a external router.
Refer to ASUS forums and support site for help and information regarding there products. 
 

ive had a few of asus modem/routers while on VDSL2. it suffered really badly with random disconnections and messed up DLM. I too also messed with it changing SNR but to no avail as after a reboot the settings would be lost, and id have to do it again and that would also cause another disconnection. ive had the dslac68u and dslac88u also the dsl66u they all pretty much sucked. They were never SIN approved by openreach.

Grafti
This probally  a silly question but i have to ask it is geo filter set to   filter mode not spectate mode
I only have only one other solution that might fix the issue
Actually i think i know how to fix yor issue   as this has happent to me before and it simple to fix
Its to do with your add deny list
When you keep changing your location its stores the allowed  servers 
on you allow list  that regions  matchmaking server but  you cant deny it after so it will always try to connect to it
 
So i recomend you actually delete it  from the allow and deny list  this solved it for me
 If you cant do that delete everything on your allow and deny list and start all other again
If this dosnt work Then only option is to  factory restet  it
I hope  i made sence

Oops  sorry i just pm  you about ghis topic as well 
Sorry i only seen this message after i pm you
If you could that would be great help  thank you
This is why these forums are brilliant everyone trys to help eatch other

I tried your  3074 3075      80 1935  both tcp  udp  for me it made no diffrence
so i just kept my original 3074 to  30000  45000  vicevera rules
Hopefully it might help someone else though

GRAFTI READ HERE
I am on ps4
I sounds to me that you have either  done two things wrong 
Make sure you set ping assist to 0
Make sure strict mode is enabeld in geo filter settings
If you do these two things  it should fix it
If you set ping assist to 20 ms i t will find you games up to 20ms  making your geo filter not work if you set your location far away
So it has to be set to 0  if your trying to find games away from your real location
 

Far as i know the port 80 is to d0 with web pages that with 443 as well
1935 has to do with ps4 
As i have seen that many times when you  read about portforw'arding psn

Grafti  i play on a 30 ms ping i find this best so far  beccause when i play on a 10 ms ping i get destroyed
I started a topic about  lag com experiment 
To try and find whst the best ping to 'play on

Well  im saying this happend in the past so i cant take a picure of it
When i was switching between firmawares a few days ago
And i have seen it appear many times over years i had dumar1
Its always after i either factory reset my dumar or system upgrade or downgrade
If it appears again i will try to screen shot it
But it will be hard to do so because i hardly use my pc i only tend to use it when i copy n paste a link to the forum
I mostly use my ps4  nowadays
This what im using as  i type this
Also if i remember correctly  it dosent show as an ip  adress it shows as a mac adress

Grafti we have ABB set to always try that
also if you can try and get your buffer bloat to an A 
Or if you have a pc run pingplotter and try get you line as stable as possible  this might help

Grafti be aware if  you downgrade it  dosent have the red ligght feature
It will show you the ports you need 
But its a lot of time and effort to this
On my list i ended up with other 100 ports  and that was from a few days of doing it
It could be a lot lot more ports
 
When you say you had beeter game 'lay on 50 ms was that ingame or oing to dumar geo ping
If 3074 3075 dont work try 3074 to 3076 i ve seen people in the padt use 3076 before
 

Grafti please try this
Rule1 source  3074 3075      destination 30000 45000 udp 
rule 2 source 30000  45000    destination 3074 3075 
This the way we rdcomend doing them 
Your rules are diffrent than ares it shows your only using 3074  not 3075 as well

Grafti  i think i see you problem your on xbox1 so i think you should be using 3o75 instead of 3074

He was a singer lol

He was a singer lol

Ive been reading for dumar1 users that its best to keep ABB se to always not never when you turn off ABB its meant to disable  traffic proratization 
I am also a dumar1 user as well 
But i  have only updated to the new firware last night
So atm im experimenting with settings
All i can say is atm i prefer my older firware
My hit detection so far is crap compared to my brilliant hit detection on my  older firware and it could be down to one reason i think
The reactive algorithm   aka fq codel
This algorithm  was on the older firware but not on the new dumar1 firware 
It now uses some kind of premptive algorithm 
 
 

Thers 4 rules you need to make east poted above but i will again
Rule 1  source 3074-3075 destination 30000-45000  udp
Rule 2  source 30000-45000  destination 3074-3075 udp
Rule 3  source 3074-3075  destination 3100-3500  udp
Rule 4  source 3100-3500  destination 3074-3075 udp
This is how i recomend you do it
sorry i made a mistake here but i just fixed it

Thers 4 rules you need to make east poted above but i will again
Rule 1  source 3074-3075 destination 30000-45000  udp
Rule 2  source 30000-45000  destination 3074-3075 udp
Rule 3  source 3074-3075  destination 3100-3500  udp
Rule 4  source 3100-3500  destination 3074-3075 udp
This is how i recomend you do it
sorry i made a mistake here but i just fixed it