Netduma Fraser

Support will be coming, we're working on it at the moment and it will come to the 1000 shortly, the ports apparently for it are: TCP: 27015, 27036, 29998 UDP: 27015, 27031-27036, 29998

Okay great so it does work with the Geo-Filter, just looks like they don't have many servers to choose from.

No estoy seguro de eso hasta que el registro de cambios se haya compilado por completo, no lo esperaría: este será principalmente para llevar 3.3 al 700, lo que ha sido mucho trabajo, pero luego debería hacer que sea más fácil lograr soluciones como esa. Puede que me equivoque, pero no quiero darte falsas esperanzas.

Most likely a server misclassified as a peer, that happens especially for new games we may not have support for/that don't use common game servers. Probably a separate chat server being blocked or it's doing the chat via P2P using the server as a relay which is why it can't be seen and is blocked. If you force the central area can you get that 60 ping?

That sounds like a good test to determine whether it's the sole cause, keep us posted!

Okay if you just leave it disabled does it still happen?

On the web interface it's known as Auto Setup on the Congestion Control panel. A new app update will be out soon that should be more stable.

That looks fine, what game is it you're trying to play? What device/web browser are you using to access?

Yes that's correct, I've given you Early Access so upgrade to that, do the same DHCP steps and see if it's more stable then: https://forum.netduma.com/forum/144-netduma-r2-early-access/

As long as it is added like this: It will be applying to the entire device. If you're using popular VPN providers those servers will be targeted for a ban over smaller less known providers.

I'll chase it and see if we can get it added

Thanks for the suggestion, I'll add it to our list.

Good advice above as I haven't come across this game yet. What is your radius set to though? The screenshot above would indicate the server is outside your radius.

Hello, welcome to the forum! I can't see why it wouldn't work, I believe people have used mesh with it in the past successfully. We don't have any specific recommendations though.

Ahh glad to hear that. We'll need to update the cloud for Infinite, thanks for bringing it to our attention, we'll get that sorted.

I think Alex resolved this in the newest DPI update Thanks for that, as above we'll need at least one more capture

Check back tomorrow... 😉

Check back tomorrow... 😉

Do you know what firmware version you're on currently? It may be worth applying for Early Access as that may be more stable for you: https://forum.netduma.com/topic/39415-introducing-early-access/ In the meantime, in LAN Settings, set the DHCP range to start at .50, then assign reserved IP addresses to devices between .2 & .49 so they're out of the DHCP range, apply, reboot from the interface, wait 2 minutes and see if that stops the disconnects.

Thanks for the update, keep us posted!

There will be an app update shortly, whether or not that fixes your issue or not I couldn't say. The dev will need to take a look at the logs, determine the cause, write a fix, test the fix etc.

Great thank you, I'll pass it on to the dev.

It may be it's gone back to the Setup Wizard, if you access does that appear and if so once complete do you have internet again?

That's our recommended starting point but it won't necessarily work for everyone. It's best to start with a high value for Congestion Control (set to Always), say 95% then do a test, decrease by 10%, test, decrease by 10% etc, until you get to a value that is pretty good and then try 5% either side of that value to see if it can be improved. It's important to note that Download & Upload on Congestion Control don't have to be the same value and that you may have a better experience with differing values.

Great to hear that, thanks for the update!