Netduma Fraser

We don't hold any information on that as they're usually customer specific, if that's the only information you have then that is all you need. You may need to contact BT to approve the R2. Untick Daylight Savings Time then apply, does it show the correct time then?

Is this with the bridge/modem mode enabled on the TP? If so do a reboot cycle on each and see if it works.

In the menu of HybridVPN enter the DNS from the config and see if that works please

If it's connected the config is working, could you provide a screenshot of how you've added the device then please?

As in you put that WAN IP in and it didn't allow you to save? If you're using the DMZ PPPoE isn't required on the R2, if you're using it as modem/bridge then yes you'll need the PPPoE details in the R2 which is done in Settings > WAN, you need to select PPPoE

You may need to clear your browser cache/cookies, the browser may be trying to load the old wizard

The config is fine, the CoD service may need to be updated, use the ports instead that the game uses and it should apply

Try this: Quit the application/game/client completely Remove device from the Geo-Filter Give PC PlayStation Device Type in the Device Manager (if on PC) Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter with the manual option Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client Then see if it works.

It's the WAN IP you would need to put in the DMZ on the TP, in this case that's 192.168.1.127 then it'll work, see if it's working better after that

What specifically isn't working, when you enter the VPN details it says failed instead of connected or it's connected but when adding your device it isn't replying? If the former please provide the config you're using and if the latter please provide a screenshot of how you added the device.

Sounds like you've set it up with your connection perfectly. As you have set the DMZ on the HG to the R2 this directs ALL traffic to the R2 so you do not need to do anything else on the HG such as port forwarding, you can use the R2 for everything.

There are no servers in the location that you are trying to force, as it is a server based game you cannot force P2P connections, you will need to adjust your settings to cover known servers that you can find using Ping Heatmap. It says in this article it uses servers for example: https://www.gamebyte.com/efootball-2022-important-things-to-know/

Okay that's fine but we can't help you install a different operating system and just because it's based on it doesn't mean normal OpenWRT would install successfully.

Did you have Battle.net open in the Windows system tray when you applied the VPN? If so that could be why, exit the game and the launcher completely including from the System Tray, then enable it then launch.

Yes that could be a possibility, best to disable if you're going to play another game It's the first post of this topic you're posting in.

You should be on the latest firmware is that right? What errors are you getting when you can't change those Geo-Filter settings? Are you using Armor? Make sure you're accessing the interface using HTTP, your browser may be forcing HTTPS which could be causing 3 of those issues. Go to the System Information page and then in the Rapp panel menu ≡ change the retries to 5, reboot from the interface, close the interface tab, wait 4 minutes before accessing and see if the Rapp not loading stops.

It's here https://forum.netduma.com/topic/51611-new-xr500-beta-firmware-33535

Could you provide a screenshot of a completed Connection Benchmark test and your QoS page please?

We don't announce or give any ETAs on firmware/any hardware until they're ready

I don't know how many devices you have but I've never seen anyone encounter any issues from having too many devices. We've had 50+ devices running fine on it but as you know you wouldn't be able to use half your new speeds through the R2.

I am illiterate in Spanish, I only speak English, if it's arrogant to ask to translate your Spanish videos/issues into English so I can understand and help you then I don't know what to tell you. I am happy to help once I understand the problem.

If your internet is 5G then yes it will have some inherent stability but aside from that this is what QoS was designed for. It's best to start with a high value for Congestion Control (set to Always), say 95% then do a test, decrease by 10%, test, decrease by 10% etc, until you get to a value that is pretty good and then try 5% either side of that value to see if it can be improved. It's important to note that Download & Upload on Congestion Control don't have to be the same value and that you may have a better experience with differing values.

No it doesn't auto adjust, you have to manually change it

Congestion Control is still needed, it's more for automatically prioritizing and allocating bandwidth according to what the activities/devices you want to take precedence.

You'll need to factory reset as it's a big change, hold the reset button for 30 seconds, release, wait 4 minutes then access.