Netduma Fraser

I've not heard anything more unfortunately and I emailed personally as well, I'll see if the team knows anything more

Added

I've given you access. If you could please not pass it out to people I'd appreciate it. The reason we have it in a new area is so we can get feedback on it to improve it. They also don't get any newer versions that way.

We'll test it and put out any necessary updates hopefully within the course of the beta.

Thanks for letting us know!

It doesn't impact what servers you play on, you still use the filter to force the servers you want, then the additional ping is applied regardless of where you play.

There is a newer update but it's just for security, still a chance it may help but would be good to upgrade to anyway. Once 3.3 is released the stability should be better but we're waiting for NG on that. https://kb.netgear.com/000066233/XR1000-Firmware-Version-1-0-0-74

Thanks for the report, we'll take a look at it and hopefully get a cloud update out during the beta period.

That's fair enough, all I can do on my side is pass it on so I couldn't give you a clear indication of when/if it would be implemented. Yes I believe it does have that function but keep in mind none of the XR range will receive DumaOS 4 or any real feature/major updates anymore.

Potentially yes but try disabling the protection options in settings, as a test also try an allow all internet rule and if that doesn't help putting it in the DMZ just briefly to test. If you can't get any higher speeds then it'll definitely be the setup.

Please try the above

Not really no, what router and firmware version are you on?

Try this: Quit the application/game/client completely Remove device from the Geo-Filter Give PC PlayStation Device Type in the Device Manager Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter with the manual option Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client Then see if it works.

Yeah so ideally it'd be modem/router in modem/bridge mode direct to the R3, then everything else behind to ensure nothing can take bandwidth away from the router, I realize with your setup that wouldn't be practical. What speeds do you have set on the router? Is Congestion Control active?

Very odd, do keep us posted!

Are you saying there is nothing else connected to the 12 port or router/modem for example?

Do PingPlotter as described above as it'll be a better test

Ideally you'd want all devices connected behind the R3 and nothing connected upstream that could pull bandwidth away from it. The in built tests can be a little off, what do you see on speedtest.net?

Is that using PingPlotter or just the waveform test?

Use the router as you normally would for the game, we'll test it and put out any necessary updates hopefully within the course of the beta.

So it doesn't provide any WiFi then? If not that makes sense, if it does that is quite confusing. Assuming it is just a pure modem, I'd suggest testing with downloads while following: https://bit.ly/bufferbloat-test start with a high value e.g 95%, test, decrease 10%, test, decrease 10% etc, until you get to a value that is pretty good, then try 5% either side of that value to see if it can be improved. Important to note that Download/Upload on CC don't have to be the same value & you may have a better experience with differing values. This is more of a real world test as you're actually doing traffic you would normally do.

I'm sorry to say that it absolutely is not the same thing as bridge mode, all he did was disable the WiFi, it does not do anything to help the NAT situation which setting to an actual bridge mode would and that's why you're having the same issue. From a little google it appears you may be able to access the Nokia user interface via https://www.webgui.nokiawifi.com/ using the credentials that should be printed on the sticker on the underside of the beacon. If you get in then you should be able to find bridge mode or at least the DMZ option. Click 'Speed Test' at the bottom of the left menu, then click Advanced on the window that appears and you can change it there. Putting the correct speeds here will help devices reach expected speeds. Ideally you need to have the beacon setup to pass all traffic unimpeded to the R3 which will help with the speeds. I have a feeling the technician has no idea what they're on about.

If this happens, first check the IP on the PC itself, then check the Device Manager for the device you think it is, do the IPs match? If they do match then do the same process as before: Quit the application/game/client completely Remove device from the Geo-Filter Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client

As above, it's in NGs hands to release it currently

Can you provide an uncropped screenshot of the Geo-Filter page showing what you see when this happens please?