ZSPaulus Posted July 2, 2016 Share Posted July 2, 2016 Hello, I heard there was an update but that i should not update if i am below a certain version. I am now on R1 debug version 1.03.3 running on rb-951g-2hnd so that is why i am posting here. Im not sure how this works though. Will you contact me via email? (This has my preference as i do not visit the forums regularly.) I will leave everything as is untill i receive word from you guys. Kind Regards, ZSPaulus Link to comment Share on other sites More sharing options...
Tonks Posted July 2, 2016 Share Posted July 2, 2016 Hi, I would like to upgrade but my router is running version 1.03.4, I have ticked remote support. Link to comment Share on other sites More sharing options...
Z1NC ONE Posted July 4, 2016 Share Posted July 4, 2016 I'm on 1.03.4 running on rb-951g-2hnd and im trying to upgrade. Link to comment Share on other sites More sharing options...
bernhard Posted July 4, 2016 Share Posted July 4, 2016 i have 1.03.4 what do i do to update my firmware...? plz help Link to comment Share on other sites More sharing options...
heavyMTLbronco Posted July 4, 2016 Share Posted July 4, 2016 On 6/21/2016 at 4:02 PM, Netduma Fraser said: We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. You're good to go. Please do not reboot before upgrading. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. You're good to go. Please do not reboot before upgrading. We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub & remote support is ticked in misc settings. My router should be now available to access. Thank you. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 4, 2016 Author Administrators Share Posted July 4, 2016 On 7/1/2016 at 4:59 PM, R3M!X said: I've been out for a while from the forum. Was there a beta firmware upgrade that I missed? If so, how do I upgrade. Sorry, been under a rock. Latest is .6g, if you're on .5 you can upgrade. If you're on less we'll need to check. I checked just in case but we weren't able to access your router. Ensure R1 in DMZ and remote support is ticked in misc settings. On 7/1/2016 at 8:24 PM, KillrRabbit said: R1 debug version 1.03.4 running on rb-951g-2hnd I would like to upgrade please You're good to go. Please do not reboot before upgrading. On 7/1/2016 at 8:32 PM, H00pdreams said: I want to upgrade and my current firmware is 1.03.3 running on rb-951g-2hnd. I have ticked remote support. Thanks, We could not access your router. Ensure the R1 is in the DMZ of your ISP hub and have remote support ticked in miscellaneous settings. On 7/1/2016 at 9:34 PM, genkidama0605 said: R1 debug version 1.03.4 running on rb-951g-2hnd you can retry ...i turn off upnp and there s no port forwarding on my isp routeur. You're good to go. Please do not reboot before upgrading. On 7/2/2016 at 12:58 AM, CharlesP said: Hello, I am using an old version and would like to upgrade. How do we proceed? R1 debug version 1.03.4 running on rb-951g-2hnd . Thanks!! You're good to go. Please do not reboot before upgrading. On 7/2/2016 at 11:11 AM, dogfriedrice said: UpnP is now disabled on my isp hub.there was no port forwarding active. You're good to go. Please do not reboot before upgrading. On 7/2/2016 at 11:22 AM, ZSPaulus said: Hello, I heard there was an update but that i should not update if i am below a certain version. I am now on R1 debug version 1.03.3 running on rb-951g-2hnd so that is why i am posting here. Im not sure how this works though. Will you contact me via email? (This has my preference as i do not visit the forums regularly.) I will leave everything as is untill i receive word from you guys. Kind Regards, ZSPaulus You're good to go. Please do not reboot before upgrading. On 7/2/2016 at 11:15 PM, Tonks said: Hi, I would like to upgrade but my router is running version 1.03.4, I have ticked remote support. We could not access your router. Ensure the R1 is in the DMZ of your ISP hub and have remote support ticked in miscellaneous settings. On 7/4/2016 at 1:54 AM, Z1NC ONE said: I'm on 1.03.4 running on rb-951g-2hnd and im trying to upgrade. You're good to go. Please do not reboot before upgrading. On 7/4/2016 at 3:58 AM, bernhard said: i have 1.03.4 what do i do to update my firmware...? plz help You're good to go. Please do not reboot before upgrading. On 7/4/2016 at 4:36 AM, heavyMTLbronco said: My router should be now available to access. Thank you. You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
diinosaurTaco Posted July 4, 2016 Share Posted July 4, 2016 I am on version 1.03.4, have remote support ticked, and want to upgrade. Link to comment Share on other sites More sharing options...
Elay Posted July 4, 2016 Share Posted July 4, 2016 I am on version 1.03.3 , remote access is enabled, I would like to upgrade. Thank you. Link to comment Share on other sites More sharing options...
Tonks Posted July 4, 2016 Share Posted July 4, 2016 Hi, my R1 is connected with a draytek vigour 130 vdsl modem, so no dmz or firewall to configure. Remote support is ticked in R1. Any other advice or I can try connecting R1 through service providers router which I still have Link to comment Share on other sites More sharing options...
Alpertdon Posted July 5, 2016 Share Posted July 5, 2016 Hi Guys, i am in the same boat, how can i get my netduma checked prior to doing upgrade. i have posted elsewhere, and sent messages, just to help with getting the message through. thank you On 7/2/2016 at 11:22 AM, ZSPaulus said: Hello, I heard there was an update but that i should not update if i am below a certain version. I am now on R1 debug version 1.03.3 running on rb-951g-2hnd so that is why i am posting here. Im not sure how this works though. Will you contact me via email? (This has my preference as i do not visit the forums regularly.) I will leave everything as is untill i receive word from you guys. Kind Regards, ZSPaulus Link to comment Share on other sites More sharing options...
KillrRabbit Posted July 5, 2016 Share Posted July 5, 2016 Hey Fraser Can I get you to make it so i can upgrade one more time please. Had some power outages over the weekend so I'm sure that it rebooted at least once over that coarse of time. Link to comment Share on other sites More sharing options...
MammothEU Posted July 5, 2016 Share Posted July 5, 2016 Hi Fraser, can I please upgrade, I have Remote Access enabled, currently running: R1 debug version 1.03.4 running on rb-951g-2hnd Link to comment Share on other sites More sharing options...
opa Posted July 5, 2016 Share Posted July 5, 2016 Im using 6g wheres the 6h upgrade where do i find it Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted July 5, 2016 Netduma Staff Share Posted July 5, 2016 On 7/5/2016 at 6:20 PM, opa said: Im using 6g wheres the 6h upgrade where do i find it 1.03.6g is the latest for people who are upgrading. 1.03.6h comes on new routers and the only difference is it has a EULA that people have to agree to. Link to comment Share on other sites More sharing options...
Alpertdon Posted July 6, 2016 Share Posted July 6, 2016 Could i please have my netduma checked so i can upgrade . Link to comment Share on other sites More sharing options...
RiNKyDiNKs Posted July 6, 2016 Share Posted July 6, 2016 My Netduma router is on version 1.03.3 and I need to update to 6g. Please help Link to comment Share on other sites More sharing options...
kriscv Posted July 7, 2016 Share Posted July 7, 2016 I have Netduma Router of version 1.03.3 Please help me upgrade to latest version Have done the following too . . . R1 is in the DMZ of ISP hub." Link to comment Share on other sites More sharing options...
Vicnyc1 Posted July 8, 2016 Share Posted July 8, 2016 I need to upgrade to the latest version but i currently have version 1.03.3. How do i go about upgrading to the latest version? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 8, 2016 Author Administrators Share Posted July 8, 2016 On 7/4/2016 at 2:12 PM, diinosaurTaco said: I am on version 1.03.4, have remote support ticked, and want to upgrade. We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub. On 7/4/2016 at 5:22 PM, Elay said: I am on version 1.03.3 , remote access is enabled, I would like to upgrade. Thank you. You're good to go. Please do not reboot before upgrading your router. On 7/4/2016 at 10:38 PM, Tonks said: Hi, my R1 is connected with a draytek vigour 130 vdsl modem, so no dmz or firewall to configure. Remote support is ticked in R1. Any other advice or I can try connecting R1 through service providers router which I still have We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub. On 7/5/2016 at 4:17 AM, Alpertdon said: Hi Guys, i am in the same boat, how can i get my netduma checked prior to doing upgrade. i have posted elsewhere, and sent messages, just to help with getting the message through. thank you Hello, I heard there was an update but that i should not update if i am below a certain version. I am now on R1 debug version 1.03.3 running on rb-951g-2hnd so that is why i am posting here. Im not sure how this works though. Will you contact me via email? (This has my preference as i do not visit the forums regularly.) I will leave everything as is untill i receive word from you guys. Kind Regards, ZSPaulus We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub. On 7/5/2016 at 1:54 PM, KillrRabbit said: Hey Fraser Can I get you to make it so i can upgrade one more time please. Had some power outages over the weekend so I'm sure that it rebooted at least once over that coarse of time. You're good to go. Please do not reboot before upgrading your router. On 7/5/2016 at 4:31 PM, MammothEU said: Hi Fraser, can I please upgrade, I have Remote Access enabled, currently running: R1 debug version 1.03.4 running on rb-951g-2hnd You're good to go. Please do not reboot before upgrading your router. On 7/6/2016 at 4:40 AM, Alpertdon said: Could i please have my netduma checked so i can upgrade . We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub. On 7/6/2016 at 3:22 PM, RiNKyDiNKs said: My Netduma router is on version 1.03.3 and I need to update to 6g. Please help You're good to go. Please do not reboot before upgrading your router. On 7/7/2016 at 3:55 PM, kriscv said: I have Netduma Router of version 1.03.3 Please help me upgrade to latest version Have done the following too . . . R1 is in the DMZ of ISP hub." You're good to go. Please do not reboot before upgrading your router. On 7/8/2016 at 2:42 AM, Vicnyc1 said: I need to upgrade to the latest version but i currently have version 1.03.3. How do i go about upgrading to the latest version? We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub. Link to comment Share on other sites More sharing options...
thewisa Posted July 8, 2016 Share Posted July 8, 2016 I have a lower version than the 1.03.5 I believe mine is still at 3.4 ; netduma support is ticked Link to comment Share on other sites More sharing options...
Vicnyc1 Posted July 9, 2016 Share Posted July 9, 2016 I need to upgrade my Netduma R. I currently have version 1.03.3. This is my second message and I haven't gotten any assistance yet. Link to comment Share on other sites More sharing options...
Vicnyc1 Posted July 9, 2016 Share Posted July 9, 2016 We couldn't access your router. Please ensure the R1 is in the DMZ of your ISP hub How do I do this? Link to comment Share on other sites More sharing options...
H00pdreams Posted July 9, 2016 Share Posted July 9, 2016 On 7/4/2016 at 10:54 AM, Netduma Fraser said: Latest is .6g, if you're on .5 you can upgrade. If you're on less we'll need to check. I checked just in case but we weren't able to access your router. Ensure R1 in DMZ and remote support is ticked in misc settings. You're good to go. Please do not reboot before upgrading. We could not access your router. Ensure the R1 is in the DMZ of your ISP hub and have remote support ticked in miscellaneous settings. You're good to go. Please do not reboot before upgrading. You're good to go. Please do not reboot before upgrading. You're good to go. Please do not reboot before upgrading. You're good to go. Please do not reboot before upgrading. We could not access your router. Ensure the R1 is in the DMZ of your ISP hub and have remote support ticked in miscellaneous settings. You're good to go. Please do not reboot before upgrading. You're good to go. Please do not reboot before upgrading. You're good to go. Please do not reboot before upgrading. I just placed the Netduma into my routers DMZ, Sorry about that. Link to comment Share on other sites More sharing options...
H00pdreams Posted July 9, 2016 Share Posted July 9, 2016 On 7/1/2016 at 8:32 PM, H00pdreams said: I want to upgrade and my current firmware is 1.03.3 running on rb-951g-2hnd. I have ticked remote support. Thanks, The R1 is now in the DMZ. Thanks! Link to comment Share on other sites More sharing options...
Vicnyc1 Posted July 9, 2016 Share Posted July 9, 2016 Okay, my Netduma is connected to the ISP Hub. I hope this helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.