Dontyouknowwhoiam Posted June 29, 2016 Share Posted June 29, 2016 Currently running version 1.03.4 on rb-951g-2hnd, remote access is on and I want to upgrade. Link to comment Share on other sites More sharing options...
mikrotik Posted June 29, 2016 Share Posted June 29, 2016 Hi Fraser, I believe my R1 should now be in DMZ mode, remote access is still ticked, can you upgrade me asap please since I'v been trying since 23/4/16. currently running 1.03.3 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 29, 2016 Author Administrators Share Posted June 29, 2016 On 6/27/2016 at 12:59 PM, milanito said: Sorry did not check the DMZ. I guess it is alright now (at least it says so ) You're good to go. Please do not reboot the router before upgrading. On 6/27/2016 at 5:45 PM, Jerker H said: Hello! I an running a R1 debug version 1.03.4 running on rb-951g-2hnd Can I upgrade? You're good to go. Please do not reboot the router before upgrading. On 6/27/2016 at 9:38 PM, jtrt2006 said: My router is running 1.03.4 on rb-951g-2hnd and I'd like to upgrade. The check box is ticked for remote support. You're good to go. Please do not reboot the router before upgrading. On 6/28/2016 at 12:41 AM, quicknoped said: Still not able to upgrade. I tried unplugging TimeCapsule and ISP router. No dice, still failed with exitcode 2. Most recently failed with exitcode 1. Then the Internet stopped working, and rebooting ISP router didn't work, so I had to reboot R1, and now Internet is working. Can you reset me and I'll try upgrading again? Should I open a support ticket? You're good to go. Please do not reboot the router before upgrading. On 6/28/2016 at 1:11 AM, drummer4864 said: My router is still running "R1 debug version 1.03.3 running on rb-951g-2hnd" please assist me with the upgrade process. Remote support is ticked on. You're good to go. Please do not reboot the router before upgrading. On 6/28/2016 at 1:55 PM, bigfesh927 said: hi i was sent here by fraser from twitter. i think i may have posted here a few weeks ago then never followed up with it. but i am trying to get my firmware upgraded. thank you. my name is the same as twitter. You're good to go. Please do not reboot the router before upgrading. On 6/28/2016 at 7:18 PM, Lunatus said: Hello, My netduma should now be available. Please let me know if you still cannot connect. Thanks You're good to go. Please do not reboot the router before upgrading. On 6/29/2016 at 9:39 AM, Dontyouknowwhoiam said: Currently running version 1.03.4 on rb-951g-2hnd, remote access is on and I want to upgrade. You're good to go. Please do not reboot before upgrading. On 6/28/2016 at 1:35 PM, EndlessExertion said: I am currently running R1 debug version 1.03.4 running on rb-951g-2hnd . I would like to upgrade to the latest version. Remote access is turned on for you. Thanks! You're good to go. Please do not reboot before upgrading. On 6/29/2016 at 11:28 AM, mikrotik said: Hi Fraser, I believe my R1 should now be in DMZ mode, remote access is still ticked, can you upgrade me asap please since I'v been trying since 23/4/16. currently running 1.03.3 You're good to go. Please do not reboot before upgrading. On 6/29/2016 at 7:09 AM, Stpatrick45 said: im 1.03.3 i have remote access enabled i would like to upgrade been trying for 3 weeks please help I've PM'd you. Link to comment Share on other sites More sharing options...
dogfriedrice Posted June 30, 2016 Share Posted June 30, 2016 could i get a upgrade please still running 1.03.3 version. thanks Link to comment Share on other sites More sharing options...
afern23 Posted June 30, 2016 Share Posted June 30, 2016 Would like to upgrade as soon as possible. on version 1.03.4 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 30, 2016 Author Administrators Share Posted June 30, 2016 On 6/30/2016 at 9:33 AM, dogfriedrice said: could i get a upgrade please still running 1.03.3 version. thanks We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub and make sure check version is enabled in misc settings. Link to comment Share on other sites More sharing options...
Toy Posted June 30, 2016 Share Posted June 30, 2016 Hi i'm on version R1 debug version 1.03.4 running on rb-951g-2hnd and would like to be upgraded to the newest version whenever possible i have remote access for tech support checked please let me know if i need to do anything else to help you help me... thanks in advance Toy Link to comment Share on other sites More sharing options...
genkidama0605 Posted June 30, 2016 Share Posted June 30, 2016 R1 debug version 1.03.4 running on rb-951g-2hnd would like to be upgraded to the newest version whenever possible i have remote access for tech support checked Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 1, 2016 Share Posted July 1, 2016 On 6/30/2016 at 4:57 PM, Netduma Fraser said: We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub and make sure check version is enabled in misc settings. hi, i am unable to find check version in the misc settings. the allow remote access is checked.i have no idea how to check if the r1 is in the dmz of mt isp hub.could i get some help? Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted July 1, 2016 Netduma Staff Share Posted July 1, 2016 On 7/1/2016 at 10:11 AM, dogfriedrice said: hi, i am unable to find check version in the misc settings. the allow remote access is checked.i have no idea how to check if the r1 is in the dmz of mt isp hub.could i get some help? I think Fraser meant 'Allow Remote Access'. That is the third option in Settings >> Miscellaneous and it should be enabled Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 1, 2016 Share Posted July 1, 2016 On 7/1/2016 at 10:11 AM, dogfriedrice said: hi, i am unable to find check version in the misc settings. the allow remote access is checked.i have no idea how to check if the r1 is in the dmz of mt isp hub.could i get some help? i just found check version in the upgrade tab and it is checked. Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 1, 2016 Share Posted July 1, 2016 On 7/1/2016 at 10:13 AM, Netduma Crossy said: I think Fraser meant 'Allow Remote Access'. That is the third option in Settings >> Miscellaneous and it should be enabled yes correct it is enabled. Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted July 1, 2016 Netduma Staff Share Posted July 1, 2016 On 7/1/2016 at 10:15 AM, dogfriedrice said: yes correct it is enabled. Is the Netduma in your other router's DMZ? Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 1, 2016 Share Posted July 1, 2016 On 7/1/2016 at 11:27 AM, Netduma Crossy said: Is the Netduma in your other router's DMZ? im sorry i have no idea how to check. Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted July 1, 2016 Netduma Staff Share Posted July 1, 2016 On 7/1/2016 at 11:58 AM, dogfriedrice said: im sorry i have no idea how to check. You have to set it up. The instructions here should help Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 1, 2016 Share Posted July 1, 2016 On 7/1/2016 at 12:00 PM, Netduma Crossy said: You have to set it up. The instructions here should help yes thankyou it helped. the r1 should now be in the dmz. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 1, 2016 Author Administrators Share Posted July 1, 2016 On 6/30/2016 at 2:48 PM, afern23 said: Would like to upgrade as soon as possible. on version 1.03.4 We could not access your router. Please ensure the R1 is in the DMZ of your ISP hub and remote support is checked in miscellaneous settings. On 6/30/2016 at 8:42 PM, Toy said: Hi i'm on version R1 debug version 1.03.4 running on rb-951g-2hnd and would like to be upgraded to the newest version whenever possible i have remote access for tech support checked please let me know if i need to do anything else to help you help me... thanks in advance Toy You're good to go. Please do not reboot before upgrading. On 6/30/2016 at 9:17 PM, genkidama0605 said: R1 debug version 1.03.4 running on rb-951g-2hnd would like to be upgraded to the newest version whenever possible i have remote access for tech support checked You're good to go. Please do not reboot before upgrading. On 7/1/2016 at 10:15 AM, dogfriedrice said: yes correct it is enabled. We couldn't access your router. Please disable UPnP & any port forwarding on your ISP hub. Link to comment Share on other sites More sharing options...
R3M!X Posted July 1, 2016 Share Posted July 1, 2016 I've been out for a while from the forum. Was there a beta firmware upgrade that I missed? If so, how do I upgrade. Sorry, been under a rock. Link to comment Share on other sites More sharing options...
KillrRabbit Posted July 1, 2016 Share Posted July 1, 2016 R1 debug version 1.03.4 running on rb-951g-2hnd I would like to upgrade please Link to comment Share on other sites More sharing options...
H00pdreams Posted July 1, 2016 Share Posted July 1, 2016 I want to upgrade and my current firmware is 1.03.3 running on rb-951g-2hnd. I have ticked remote support. Thanks, Link to comment Share on other sites More sharing options...
Dillinger Posted July 1, 2016 Share Posted July 1, 2016 On 7/1/2016 at 4:59 PM, R3M!X said: I've been out for a while from the forum. Was there a beta firmware upgrade that I missed? If so, how do I upgrade. Sorry, been under a rock. What version on you on currently? 1.03.06g is the latest. If you do not have that version, follow the instructions on the first page of this thread and Fraser or one of the guys will hit your router and prep you, then you can self install the latest version. What are you missing? Hyper Lane for one. Advanced queuing for gaming packets. And some other stuff I have probably forgotten as commonplace now. It's been a bit and I suspect that was a pretty heavy rock. Link to comment Share on other sites More sharing options...
genkidama0605 Posted July 1, 2016 Share Posted July 1, 2016 R1 debug version 1.03.4 running on rb-951g-2hnd you can retry ...i turn off upnp and there s no port forwarding on my isp routeur. Link to comment Share on other sites More sharing options...
CharlesP Posted July 2, 2016 Share Posted July 2, 2016 Hello, I am using an old version and would like to upgrade. How do we proceed? R1 debug version 1.03.4 running on rb-951g-2hnd . Thanks!! Link to comment Share on other sites More sharing options...
dogfriedrice Posted July 2, 2016 Share Posted July 2, 2016 On 7/1/2016 at 4:58 PM, Netduma Fraser said: We couldn't access your router. Please disable UPnP & any port forwarding on your ISP hub. UpnP is now disabled on my isp hub.there was no port forwarding active. Link to comment Share on other sites More sharing options...
quicknoped Posted July 2, 2016 Share Posted July 2, 2016 Thanks, I'm upgraded! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.