BlackBeard85 Posted December 7, 2016 Share Posted December 7, 2016 ok I think I have made the correct chages to allow access for the update from. 1.03.3 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 9, 2016 Author Administrators Share Posted December 9, 2016 I am on version 1.03.4 can you please help me with the upgrade. I upgraded my internet and the netduma is holding me back on download speeds. I need the latest version. You're good to go. Please do not reboot before upgrading. ok I think I have made the correct chages to allow access for the update from. 1.03.3 We still could not access your router. Port forward 1024-65000 to the R1 and remove the R1 from the DMZ. Link to comment Share on other sites More sharing options...
Grafti Posted December 9, 2016 Share Posted December 9, 2016 We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Done! Please, try again Link to comment Share on other sites More sharing options...
KCINCO Posted December 10, 2016 Share Posted December 10, 2016 Hello I need to upgrade is 1.03.4 Link to comment Share on other sites More sharing options...
KCINCO Posted December 10, 2016 Share Posted December 10, 2016 Hello I need to upgrade my version is 1.03.4 and the congestion control it's not working Link to comment Share on other sites More sharing options...
bagsta69 Posted December 10, 2016 Share Posted December 10, 2016 Chill Winston, when the people who deal with the upgrades get around to sorting it im sure you will be upgraded, however this can take 3-4 days so please have a little patience. Link to comment Share on other sites More sharing options...
Pmarr Posted December 12, 2016 Share Posted December 12, 2016 Hi guys, Two quick things; 1. I love your product (for the rare times I get to play my PS4) 2. I now realise my poor prioritisation (of employment over gaming) has resulted in poor maintenance. My NetDuma is stil on v1.03.4 My remote tech support has been ticked. Any assistance would be appreciated. Regards, Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 12, 2016 Author Administrators Share Posted December 12, 2016 Done! Please, try again We still could not access your router. Port forward 1024-65000 to the R1 and remove the R1 from the DMZ. Hello I need to upgrade is 1.03.4 You're good to go. Please do not reboot before upgrading. Hi guys, Two quick things; 1. I love your product (for the rare times I get to play my PS4) 2. I now realise my poor prioritisation (of employment over gaming) has resulted in poor maintenance. My NetDuma is stil on v1.03.4 My remote tech support has been ticked. Any assistance would be appreciated. Regards, Awesome to hear that! We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Link to comment Share on other sites More sharing options...
Fazzale Posted December 12, 2016 Share Posted December 12, 2016 hello, my version R1 debug version 1.03.4 running on rb-951g-2hnd and i ticked remote support i want to upgrade ty Link to comment Share on other sites More sharing options...
KCINCO Posted December 12, 2016 Share Posted December 12, 2016 Fraser can you help me I don't know here is the firmware. And how about the new setup to play cod. In the 103.4 I die to fast like an insta kill my connection is bridge mode 120mb down 8 up reactive congestion 70/70 upnp disable ipv6 disable on wan and miscellaneous 2000km and 45 ping. In the netduma test I got a 45 ping I saw on kill cam when I die and want I see its not what happened. Can you please give me a tip? Sorry but I also got share excess untiked Depp packet disable and in the congestion control I give 70 for my ps4 Upgrade done Link to comment Share on other sites More sharing options...
purpleandgold33 Posted December 13, 2016 Share Posted December 13, 2016 I am on 1.03.4 can you please let me know when I can upgrade? I have remote access ticked Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 13, 2016 Author Administrators Share Posted December 13, 2016 hello, my version R1 debug version 1.03.4 running on rb-951g-2hnd and i ticked remote support i want to upgrade ty We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Fraser can you help me I don't know here is the firmware. And how about the new setup to play cod. In the 103.4 I die to fast like an insta kill my connection is bridge mode 120mb down 8 up reactive congestion 70/70 upnp disable ipv6 disable on wan and miscellaneous 2000km and 45 ping. In the netduma test I got a 45 ping I saw on kill cam when I die and want I see its not what happened. Can you please give me a tip? Sorry but I also got share excess untiked Depp packet disable and in the congestion control I give 70 for my ps4 Upgrade done Something wrong I only got 70 down with a lot of spikes.. Not established connection Now I can t do any test in the netduma. When I try to do a test wired it give an error and disable my Ethernet chip on my laptop. I need to restart my laptop I don't know what was the problem but now its ok. 113mb 7,69 If you are having issues please make a new thread in General Support including the screenshots asked for here: http://support.netduma.com/support/solutions/articles/16000022425-lag-support-instructions-to-post-on-the-forum- This thread is just for getting people upgraded. I am on 1.03.4 can you please let me know when I can upgrade? I have remote access ticked You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
Grafti Posted December 13, 2016 Share Posted December 13, 2016 We still could not access your router. Port forward 1024-65000 to the R1 and remove the R1 from the DMZ. Try again, please Link to comment Share on other sites More sharing options...
Fazzale Posted December 14, 2016 Share Posted December 14, 2016 We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. can you try again please Link to comment Share on other sites More sharing options...
Vapor Posted December 14, 2016 Share Posted December 14, 2016 Currently on 1.03.3 please upgrade Link to comment Share on other sites More sharing options...
edgarisdrunk Posted December 14, 2016 Share Posted December 14, 2016 Hello, I am on version 1.03.4 How do I proceed in upgrading? Edit: what are the hours I should make myself available for this? I'm in Texas (USA) but I have a flexible schedule. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 15, 2016 Author Administrators Share Posted December 15, 2016 Try again, please We still could not access your router. Please make a post in the 1 on 1 section with dates/times you're available for me to take a look. Please keep in mind I need at least a days notice. can you try again please We still could not access your router. Port forward 1024-65000 to the R1 and remove the R1 from the DMZ. Currently on 1.03.3 please upgrade You're good to go. Please do not reboot before upgrading. Hello, I am on version 1.03.4 How do I proceed in upgrading? You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
Vapor Posted December 15, 2016 Share Posted December 15, 2016 upgrade failed exit code 1 Link to comment Share on other sites More sharing options...
Vapor Posted December 15, 2016 Share Posted December 15, 2016 Fixed it unplugged for 5 mins Link to comment Share on other sites More sharing options...
cowboy3769 Posted December 18, 2016 Share Posted December 18, 2016 I am on 1.03.4 version, can you help me get the new upgrade 1.03.6 version Link to comment Share on other sites More sharing options...
cowboy3769 Posted December 19, 2016 Share Posted December 19, 2016 I am still waiting for some help for this upgrade Link to comment Share on other sites More sharing options...
cvega203 Posted December 19, 2016 Share Posted December 19, 2016 Hi I am on ver 1.03.3 need help to upgrade. Thanks Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 19, 2016 Author Administrators Share Posted December 19, 2016 I am still waiting for some help for this upgrade You're good to go. Please do not reboot before upgrading. Hi I am on ver 1.03.3 need help to upgrade. Thanks I've PM'd you. Link to comment Share on other sites More sharing options...
edgarisdrunk Posted December 19, 2016 Share Posted December 19, 2016 Haven't gotten a response, although I am not in a hurry. Can someone confirm whether I'm "in line" to be upgraded? Link to comment Share on other sites More sharing options...
BrewAndGame Posted December 19, 2016 Share Posted December 19, 2016 I'm on version 1.03.3 and looking to upgrade. I can't get any of the info about my network to load. Guessing its because my firmware is out of date. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.