DARKNESS

That just placebo or the game being broken the way aim assist works for controller is when you move your character while aiming the stick it pulls you towards the player somewhat it not aimbot it an assist so if you are not precise with your aim then that your problem.Though knowing activision tactics it can just be the simple fact there manipulating your matches to an extent.

@AylinkaIf your using Firefox as I can see somewhat you can use the link below which explains the instructions https://support.mozilla.org/en-US/kb/https-only-prefs the reason for this is that it just how the UI was designed and so it has some issues with certain stuff enabled so forth like saving cache on a browser and forcing HTTPS when it not necessary on a network that your accessing. I am not part of the netduma team am just hear to assist

@AylinkaHave you tried disabling https and or use incognito when accessing the interference?

@Netduma FraserTrue indeed though would it be possible in the future to add multiple different benchmark services for convenience? Just a thought not necessary...

@Netduma FraserActually after some thoughts I think it would be a beneficial feature to make it more convenient for users however I think using a site like https://www.waveform.com/tools/bufferbloat and add that to the ping optimizer would help a lot more to stabilize networks so users don't have to involve themselves with things they don't understand too much and solve there network problems.

@scbbaAs @Fuzystated to add you won't necessarily feel it if your using your internet for streaming content so forth but anything to do with VOIP communication is were it noticeable so if you want to the most responsive experience with gaming your always going to need sqm in some sort of way

The modem is just the receiver for the signal it doesn’t do much more than that the more channels the better since it means less congestion but there always buffer though if your running 500mbps it shouldn’t really impact you too much though it always best to use qos to reduce the buffer when gaming since other devices may impact it and manually prioritize the device so it not impacted though not necessary that just my personal opinion.

@unknownidYou can probably get it to a better spot with no buffer especially using GIG internet realistically as long as your above 500mbs you won't notice much of a difference and if you need full speeds just disable it temporarily to download stuff quicker This is mines for example but that just for my own network https://www.waveform.com/tools/bufferbloat?test-id=ceb88ca2-699b-43dc-adcc-48882533835e

@Adrian ElmazI would recommend using incognito when accessing the interference since it cache sensitive and may cause errors to add the footage you sent isn't format supported so it isn't clear what your doing...I advise using the mac recorder it just a lot clearer to see and all you have to do is attach the file For the geofilter you may need to re sync or delete and re add it

@unknownidJust set it up as console should work if I recollect correctly

@BKxLounge Are you sure the star link is properly setup to have open field of view because any interference and it pretty much loses internet so it needs to be under the right conditions. When you do lose internet do you have internet on the star link without rebooting the system?

@AlixUpload is more crucial for like VOIP services if you can get 100mbs and 20 upload that the sweet spot though it is without a doubt extremely rare unless your in a country with fiber speeds and don't have to spend a fortune to get higher uploads than 40 😂

@STROXS88VPN's are a thing for a reason there used for anonymity there not necessarily used for hacking that just a side effect that comes with it there's bad and good people out there that just how the world works buddy 😂

@Netduma FraserThis is just an advice for the next generation R3 design since I noticed that on the R2 it enclosed except in the bottom and therefore there isn't much ventilation unless it kept upside down and some users have had complaints do to were they live and temperatures affect there performance. So I'd recommend a design were there's airflow on the sides, back and top since most users just use the router the way it was design to be placed which is typically sitting down. I know in certain areas this is going to be an issue regardless though it can be somewhat mitigated with better a designs for ventilation

@STROXS88 I would use a network analyzer to figure out whether it other channels causing interference in your area and change them if necessary since that can be affecting your wifi speeds. I would also recommend playing over Ethernet to get the most optimal experience it'll cut your latency by half in most cases over wifi. Any router can have over heating issues though I do have to admit there was a design flaw on the Netduma R2 which was the casing were there no ventilation unless it upside down though this isn't the only product in the world that has made mistakes. If it an issue for you do to your local area I'd recommend getting a small fan and installing it below the router in order to prevent over heating crashes. Just giving some advice brother

@fae7787You can use anything really as long as it has the capabilities of becoming an access point it all good though you'll need to have them hardwired preferably if not it pretty much pointless since you'll never get the full speeds. It more intricate and you'll need professional installment or take your sweet time hard-wiring and installing everything yourself since if it a household you'll need to be able to have proper poe network lines. In short it not cheap procedure and is a bit more complicated if you want them to be around a big house

Have you checked whether the packet loss is coming from the modem/ISP?

@fae7787I believe it about 20-25 or so concurrently by that I mean they have to be active all at the same time which is rare though if you have a big household then it a different story so that why I say it rare for most users to care about it unless they live on a household with a lot of users. To note you can keep your XR1000 and running it as AP and have the R2 be the main to take advantage of software features but your not taking advantage of the hardware of the XR1000 which is the downside just the range of the wifi + speeds are kept intact Another thing I forgot to note is that the R2 is limited on Wifi to 250-300mbs though hardwired it no different than the XR1000

@fae7787 You would lose the range of wifi + plus hardware capabilities such as amount of devices being able to be connected to the network though for most users that isn't an issue You would in theory gain the latest updates which sometimes other routers supported don't get for a while Warranty is a year https://netduma.com/terms/ I am sure it is though not anytime soon maybe 2025 or 2026 would be my guess since docsis 4.0 isn't out there just yet there realistically isn't any need for it till then though it should be way superior than the R2 in hardware and be better though out on paper since it gives them time to add better software before porting it to the R3 and innovating upon the better hardware I am not affiliated this is just my own thoughts and experience with the products

@JagraWhat the model of your modem? Though it should be pretty self explanatory on the R2 should be the one with the blue color the one that says ethernet I would suggest looking at your manual for better instructions. One crucial step is to have your modem off and turn it one after the R2 is fully running this is do to your modem maybe not refreshing the IP so forth..:

@JagraIs your modem on when your connecting the R2? How are you accessing the OS?

@Frosty uchihaIf your experiencing packet loss is that because you have low bandwidth? If not it maybe your ISP I would suggest looking at your modem logs which in most cases do show if there are issues going on such as too many uncorrectables

There's no need if you use upnp it ports the ports automatically but if you want you can look up the ports for the mobile version then add them for each column though realistically there's no benefit except maybe some security and the unrealistic part is that you can only set those ports for one device which makes it useless if you need it for other devices.

@ownal0tThe games don't crash do to third party software on console that just activision especially if it coming from infinity ward the best team in the world (SARCASM) with they're horrible optimization it the same thing when you try to invite a player in MW2 on the PS5 the game crashes completely majority of the time the bug has been there since day 1 was never fixed so keep giving them your wallet till you feel like your a fool 😂 It not the only game your able to replicate crashes but a core function that is commonly used should be fixed ASAP it'll probably take them a full year for the game to be stable if they even put any focus into that is but knowing how warzone is there main focus good luck on that end.... https://www.reddit.com/r/CODWarzone/comments/113b74o/cod_mw2_season_2_ps5_consistent_crashing_after/

@Bluegixer1Though are you able to access the interference and so forth?