DARKNESS

@carmine19It not on the list so it not going to be detected under Smart Boost if your on PC do the capture with wireshark and add it to the following forum for it to get priority whenever they update the DPI...

Exit Lag wasn't advertised with netduma though it has been requested by others as well to add this is a better explanation to your situation https://www.youtube.com/watch?v=n7MVdUBjTv8 https://www.youtube.com/watch?v=JMicgp1nmHA

@CHEATZThey all mostly use the exact same ports also there no need to port forward on console just use upnp but if you really want to there it is https://support.activision.com/articles/ports-used-for-call-of-duty-games

Look up port forwarding for your specific game and platform as they can all be different

@Dominik GrabowskiThat because you are not disabling the auto update feature

@Netduma FraserSeems to be a bug with lan Ports since after hard resetting it fixed another thing to note when checking LAN it still said 1G Speeds on Settings

@Dominik GrabowskiYou can downgrade versions you can do so by going into settings>administration>router update and upload your preferred firmware version

I don't think that has anything to do with you being able to access the UI buddy.....the update is coming this month that am aware unless there a delay

@Rbk23To add are you running the latest firmware?

@Rbk23Well there always the possibility that it a defective unit....

@Rbk23I'll be honest I am not an expert on ONT so this articles summarizes something I found a bit particular is that you need a special fiber router whatever that means therefore your probably going to have to use your system like this ONT>ISP ROUTER>R3 If that works you can just disable the wireless signal for the ISP router and have the R3 handle everything in a way it just using the other routers connection as the throughput. Aritcle https://us.hitrontech.com/learn/what-is-an-ont/ How an ONT fits into your home network An ONT device is necessary for your home network only if you have fiber installed. This is because, with fiber-optic Internet, you cannot use any modem or router. You must have an ONT or OLT and a fiber router.

@Rbk23You have access to the ONT correct? If so did you reboot it when you connected to the other router? If not do so and see if same occurs

@Rbk23Try dmz option I would do the following: Copy the WAN IP from the R3 in Settings > WAN then access the ISP modem/router and enter it in the DMZ function

@Rbk23All you need to care about are the first 3 hops and the last hop basically

@Rbk23This is an example as to how it should be you can ignore the ISP section as they typically block Ping to there servers depending on your ISP that is etc..

@Rbk23Yup that definitely an issue first hop should be clean as the others are you using dhcp or ppoe? Since as you said your using your ISP box it shows no affect then there must be something on the settings or the way you set it up that causing latency issues on the first hop.

Application name: Genshin Impact Device type used for capture: MAC OS/PS5 Any other comments: New Game for DPI Engine https://www.playstation.com/en-us/games/genshin-impact/ Genshin Impact #1.pcapng Genshin Impact #2.pcapng Genshin Impact #3.pcapng

@Netduma Alex Application name: Tom Clancy's Rainbow Six Siege Device type used for capture: MAC OS/PS5 Any other comments: Not detected on the PS5 https://www.playstation.com/en-us/games/tom-clancys-rainbow-six-siege/ Rainbow.pcapng Rainbow 1 .pcapng

@Netduma FraserMajor bug found so I tested all lan ports trying to figure out why I was getting 100mbs when I have GIG internet speeds and figured out that port 3 specifically is the slowest locked to 100mbs and 20 upload the rest work fine this has also been tested with other devices to see if it was a just once occurrence and Ethernet cables. R3 Ethernet Port Test.txt

@appleround I would just run the latest firmware and see if that solves your issue...also do a hard reset after upgrading

Hmmm I remember having this issue with my older R2 the way it was caused was by having more than 1 lan connection though I couldn't replicate it all the time. I am certain it an OS issue as the router worked fine when there was no lan connection from more than 1 device and you can see similar warnings. Though when I got the newer unit the issue stopped occurring...I still have the unit so I can probably replicate the similar log.

@JayC7Update yes it not detected I'll upload a capture when I get the time though it should've been working looking at the past I did upload a log I guess alex missed it since looking at the forum he didn't seem to have updated it...I don't play rainbow six siege generally so that the reason to add I am basically the only guy who's gotten all the PS5 versions tested and am not affiliated by netduma so I by no means am required to follow up.

@Rbk23Google should be fine as it the most common

@Rbk23Actually just do 10 minute one that should be fine to add you can try using steady ping on expert and set your ms that is mostly suitable to stabilize the connection as it forces it

@Rbk23Can I see an Image set to 6 hours or less if possible