Netduma Liam

Excellent, thanks for letting us know.

Since updating the firmware, have you factory reset the R2? If not, I'd suggest doing this as it's a big update and we want to ensure no old low-level code is still present from the previous firmware. Try that and let us know if you're still having these issues.

Unfortunately accessing the R1s nowadays is quite complicated as they're a little older. The developer I'll need to assist with this is currently on holiday. One thing I think is worth trying though would be to disconnect the WAN cable from the R1 and also disconnect all other devices such that only your PC is connected to it. If you could perhaps then also try the upgrade through Edge, that may make things a little clearer. Could you perhaps let us know if that helps?

Warzone uses server-based matchmaking so I'm afraid you won't be able to do that. The reason you would've had to allow your friend is because whichever server he was going through would've appeared outside your Geo-filter radius and therefore would've been blocked by it.

I certainly wouldn't rule it out, but there's nothing in the works just yet I'm afraid!

OK, there doesn't seem to be anything in the logs with regards to it losing a connection so I suspect it's just due to the router being rebooted. Does it ever drop the VPN connection without the router being rebooted?

Does this occur if you don't turn the router off at night? I don't think it'll reconnect automatically if the router loses power. Are there any VPN logs in the 'logs' tab?

Hey all, Hope you're all doing well and looking forward to the release of 3.2. I'm just writing a quick post to let you know that we're looking for Early Access testers for future R2 DumaOS releases, starting with this one. The purpose of the early access group is to test new firmwares on a larger scale right before we release them publicly. Please note that these firmwares might not be completely stable and you may find issues, so beware of this before choosing to upgrade to them. Go ahead and sign-up below: we'll reach out if you've been added! https://forms.gle/FMxFoCYk7vNv5DEW7 Cheers, Liam.

We did find a potential solution but it's going to take a lot of time and a bit of a Geo-filter re-design to implement. Once we are able to do that we'll let you guys know.

Great suggestion, I personally greatly enjoy the gross misuse of RGB. I'll certainly be suggesting it for any future hardware.

OK, háganos saber cómo es. ¿Por qué necesita reenviar el puerto? ¿Hay algún problema que esté resolviendo con esto? Probablemente podamos ayudarlo a encontrar una mejor solución.

It's just a misreading, you don't actually have any NAT issues from what we can tell. You can safely ignore it.

OK, it may be best to take the WAN IP of the R2 and put it in the DMZ of the ISP router, that will solve the NAT problem. To answer your other questions: Yes, but routing a game through a VPN will add latency and degrade your experience. Yes, that will send all traffic from that device through the VPN.

What is the make and model of the modem exactly? Is it a pure modem or does it have Wi-Fi capability?

Thanks for letting us know, I can see the reboot but not what caused it, what was the behaviour/symptoms?

Thanks for sending these over, we'll get them run through our DPI engine and add them to DumaOS if all goes well!

OK, can you send over a screenshot of how it's now configured? We can see if there's anything's causing it not to filter properly.

That's odd, could you please open an incognito window in chrome, then go to the interface and test if Ping Heatmap is behaving the same way? If it is, please download a copy of the log file from System Information and send it over. For Geo-filter, please do the following: Remove device from Geo-filter Resync cloud from three-line menu Re-add device to Geo-filter When asked to select a service, make sure you pick 'Choose manually'

Use the advanced configuration instead. Download the OpenVPN files from PureVPN from this link: https://support.purevpn.com/openvpn-files Then pick a file based on the location you want to VPN to, copy the entire contents of the file and paste it into the 'Configuration' field when doing the advanced config. Once done and connected, add your device in the VPN Traffic panel on the right.

Not as yet I'm afraid, it requires a bit of a re-design of how everything works so it may take some time to implement.

Dove stai impostando la posizione della VPN? Se stai cercando di essere messo su server in tutto il mondo con un ping incredibilmente alto, potrebbe essere riluttante a metterti in un gioco.

You shouldn't need to reset and reconfigure anything from scratch. In what way is Geo-filter not working exactly? Can you describe exactly what you're seeing when it's not working? Are you able to ping any of the other games in Ping Heatmap after resyncing the cloud as mentioned?

Hybrid VPN isn't working, it shows that it's failed in the Connection Status. NAT type 2 on the Play Station is not necessarily a problem, it just means the Play Station is aware there is a router above it. You still have an Open NAT with this type. If you're going to add the R2 to the DMZ of the modem, make sure you remove any port forwarding rules you've configured on the R2.

Welcome to the forum! For the language issue, this is coming in future. In the meantime you could try installing the Google Translate browser plug-in and translate the page? For your NAT issue, have you followed this guide? It described all the ways you can get an Open NAT. http://support.netduma.com/support/solutions/articles/16000076587-dumaos-optimal-settings-guide-open-nat Your Hybrid VPN isn't connecting for some reason, could you please let us know who your VPN provider with and which OVPN file you're using to configure it? Can you share a screenshot of how you've currently got Geo-filter configured? In Ping Heatmap, click the three-line menu in the top left of the map then click 'Resync cloud'. After that, check if you can ping servers.

@RickyrocksPlease keep your responses contained within one reply, it makes it quite difficult to read when they're spread across four separate replies. I'm not to familiar with that specific modem, if you access it's settings can you see if there's anywhere for you to configure PPPoE? I'm pretty sure that's what's causing your issue.