Netduma Fraser

You can find Early Access here: https://forum.netduma.com/forum/144-netduma-r2-early-access/ It's worth sending over the logs to us as there may be something there that may not immediately be indicative/obvious

You already have the WiFi disabled, that's likely why the mirror mode isn't disabling, do the lights on the router still not disappear after a reboot?

Added!

Have you definitely clicked save after the WiFi has been disabled? If not give it a reboot, have the lights gone off then?

Puoi ripristinare le impostazioni di fabbrica tenendo premuto il pulsante di ripristino nella parte posteriore per 30 secondi, quindi rilasciarlo, attendere 2 minuti, quindi accedere e completare la configurazione guidata

Added you both

Not necessarily Ping Assist, could be enabling the Geo, moving location etc, it's definitely not been whitelisted

Un ripristino delle impostazioni di fabbrica o la riconnessione dei dispositivi che hai eliminato da Gestione dispositivi tramite lo stesso metodo, 2.4/5 Ghz/ethernet e con lo stesso nome/tipo di dispositivo risolverà il problema.

That one hasn't been whitelisted, it must have been allowed before your settings had applied

Yeah I'm aware, that's great then, you can just ignore the in built test!

That's quite a small range, try the radius (not polygon) with a 1000km range and see if you get better results, set Ping Assist to 0

Are you using Ping Assist exclusively without the radius or with the radius? Ping Assist is an assist, not a limit so it is possible to get higher pings than what you have set. It's better to use the radius only around your location if you don't want the chance of that happening.

We're always working on DPI and with SmartQoS it's even more of a focus so we'll be doing a lot on it

It's quite possible you've got a faulty unit actually as you shouldn't be seeing all those issues, I'd recommend contacting the retailer/Netgear to see if you can get a replacement.

That's fair enough, I can understand why you wouldn't want to do a reset, I do think it's got itself into a weird state and so it won't work without that reset. It's possible re-upgrading the firmware might clear it, you could try that as it would be less disruptive and then if it doesn't work try the alternate methods you mentioned.

Testing is going well, we don't have any ETAs but I'll make sure to get you guys added to the group once it's on the way. Thanks for the reminder about the page update, I've chased the team to get that sorted!

Check by doing an actual upload from the console, if it goes faster than the reported speeds then you can just ignore it

Hey, welcome to the forum! You'll likely need to disable QoS fully from the Congestion Control to reach closer to your expected speeds. DumaOS is more demanding than the very old firmware versions so that'll be why it's harder to reach those speeds with QoS enabled.

Hello, welcome to the forum! If it's happening consistently every few days, when it's approaching the end of that time, i.e. where it's probably going to fail within a day could you grab the logs from the System Information page please and also provide a screenshot of the same page? Hopefully we'll be able to see something ramping up. I have given you Early Access as well so it may be worth trying that as it is more up to date and see if you experience the same issue.

Hey, welcome to the forum! I haven't heard anything more about it specifically and no one has mentioned it in the beta that I can recall so it is possible it has been fixed for the beta, if you don't want to try it then it's possible if you re-install the existing firmware you're on may clear it

Re-enter the URL manually and use the IP address, see if that then allows you to login correctly

You would have to add every single device to the VPN, there is no way currently to apply it to the entire network. I don't think so, the rules you have available are the applications/services listed and the ports. Not sure I follow, if you disable the WiFi you'll have to re-enable it manually if you want it back on

Added!

With Share Excess enabled on Bandwidth Allocation devices will be able to exceed their allocation if they need it so you'll see speeds up to the Congestion Control limit and so you'll know it's working if that is the limit. We're still improving that feature so if it puts it to 100% Congestion Control won't be doing much so best to manually change it for the moment.

Added you 3, enjoy!