Netduma Fraser

Right click the page, then go to Inspect (Element), on the window that appears click on the Console tab. Then paste and enter this command: await duma.RPCHandler.PostRPC({rapp: "com.netdumasoftware.config", method: "get_time_zone", params: []}) see if that allows you to get past the Setup Wizard.

Open it in an incognito window and see if you can continue, if not try another browser, otherwise download the DumaOS app on your phone and try to continue that way

Thanks for letting us know, we can certainly look into it

It's hard to say, I think they would use relay servers regardless but I suppose it is possible - if you play without filtering enabled but so you can still see the servers, do you notice the same thing?

Have you tried the latest Early Access firmware? It should be largely resolved with that one. To disable fully go into SmartBOOST - Menu - Settings > Toggle Enabled off

The only things I can think of that could be causing it are: The devices aren't directly connected, instead they're connected through a switch, extender etc The device name you think it is, is no longer correct - for example if you've changed the connection method it may appear as a different device. Check the IP on the device itself and then check the device you think it is on the Device Manager, do they match? If they do then I think go ahead with the reinstall of the firmware.

Added

I've given you Early Access, please try the firmware there and see if it works better please https://forum.netduma.com/forum/151-netduma-r3-early-access/

Just to clarify, you're allowing the area of Japan which seems to handle the relay and than allows you to then force the server you want to play on to wherever you want?

I think you'll need to be on the beta firmware, please re-upgrade and check again

Added https://forum.netduma.com/forum/144-netduma-r2-early-access/

Added https://forum.netduma.com/forum/144-netduma-r2-early-access/

Keep scrolling down and the button should become viewable

Good to hear, do let us know any feedback you may have.

There isn't anything there to indicate why it may not be working, could you add another device to the VPN and see if you notice the same thing?

Go to https://forum.netduma.com/forum/151-netduma-r3-early-access/ and check the pinned topic for the firmware

Click Advanced on that screenshot there and skip through until you get to the interface. Then reboot your modem, wait 2 minutes, then reboot the R3, wait 4 minutes and see if you have internet.

Added

Zippy is the resident Halo player here so he speaks wisely. If you're going to use the Geo-Filter then you'd have to use Geo-Latency, it's just not likely to work otherwise given their changes.

Added

The V2 is the same as the V1, there was a CPU shortage so they had to make a new one with a comparable CPU, that's the only difference. There aren't any conspiracies going on, if I knew why it took so long I would say. When I have more information I will provide it.

No there isn't, exitlag changes your routing to the game server, this isn't something we can do - you're essentially using a VPN

Added https://forum.netduma.com/forum/151-netduma-r3-early-access/

Quite possible a newer cloud update caused an issue on it due to incompatible firmware, it would be best to upgrade it back to 3.0.

If that's the case then yes, in theory it should work absolutely fine but I can't guarantee it, we haven't had too many people in that situation