Jump to content

New firmware


scoobypreza

Recommended Posts

Try using 2.4 and 5ghz band channel to auto and set 2.4 the channel width to 40mhz and the 5 channel width to 80mhz. Fixed my wifi issues with the R2 on the firmware Frazer will PM you. 

Link to comment
Share on other sites

  On 10/26/2020 at 9:37 PM, Deceptive said:

Try using 2.4 and 5ghz band channel to auto and set 2.4 the channel width to 40mhz and the 5 channel width to 80mhz. Fixed my wifi issues with the R2 on the firmware Frazer will PM you. 

Expand  

I've done all that m8 and had several firmware updates 

Link to comment
Share on other sites

40Mhz on 2.4 is fine if you don’t have neighbouring channels and devices support it but if you do have nearby channels that overlap then it just creates more issues which is why the coexistence if often found on routers where the router will not allow 40Mhz due to interference. 

Link to comment
Share on other sites

  On 10/26/2020 at 10:00 PM, Netduma Fraser said:

The one I've sent recently is the very latest and a release candidate for public release. I don't have any more to provide at the moment, we will continue working on the WiFi to make it more stable.

Expand  

What version is it m8 

Link to comment
Share on other sites

  • Administrators
  On 10/26/2020 at 10:03 PM, scoobypreza said:

Send me a pm plz 

Expand  
  On 10/26/2020 at 10:12 PM, c0rupt3d said:

Could I get a copy also? Thank you.

Expand  
  On 10/26/2020 at 10:48 PM, yoda_in_area51 said:

Me too please 😃

Expand  

Sent PMs.

Link to comment
Share on other sites

  • Administrators
  On 10/27/2020 at 5:16 PM, Gprime31 said:

Me too plz

Expand  
  On 10/27/2020 at 8:37 PM, Cheeky monkey said:

could i have one please as wifi is doo doo on r2 cheers

Expand  
  On 10/27/2020 at 10:03 PM, doylebl39 said:

Me too please 

Expand  
  On 10/27/2020 at 10:09 PM, pantera said:

Send to me as well, please.

Expand  
  On 10/27/2020 at 10:14 PM, JOSHR3ll said:

Me too please

Expand  
  On 10/28/2020 at 3:24 AM, _cstatus said:

Could I get a copy also? 

Expand  

Send a PM to you all.

  On 10/28/2020 at 8:04 AM, xiSM said:

I have issue with wifi is there any solution?

Expand  
  On 10/28/2020 at 8:17 AM, bcoe30 said:

Nope .. it’s trash not stable at all

Expand  

Did either of you do a factory reset after updating as it is clear neither of you read my PM correctly. You now have more options within WiFi so experiment with them.

 

Link to comment
Share on other sites

Hey Fraser, May I please have a PM to try. I do not use the wifi of the R2 and after it needing many reboots or resets I have been using an old router. Is there anything more up to date I can try to see if it will improve the stability of the R2 as I was still getting dropped from games and also experiencing spikes of lag with packet loss after a few hours into a game? 

Link to comment
Share on other sites

  • Administrators
  On 10/28/2020 at 3:37 PM, ScottBot said:

Hey Fraser, May I please have a PM to try. I do not use the wifi of the R2 and after it needing many reboots or resets I have been using an old router. Is there anything more up to date I can try to see if it will improve the stability of the R2 as I was still getting dropped from games and also experiencing spikes of lag with packet loss after a few hours into a game? 

Expand  

Sent a PM.

Link to comment
Share on other sites

  • Administrators
  On 10/28/2020 at 8:45 PM, LegionGaming said:

Would also appreciate if I could get a pm Fraser.

Thank you in advance.

Expand  
  On 10/28/2020 at 9:39 PM, Bacon said:

May I have it also please?

Expand  
  On 10/28/2020 at 9:41 PM, Mossberg said:

I concede. I will take the latest firmware too. 

Expand  

Sent you all a PM.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...