Jump to content

Upgrading your Netduma R1 to DumaOS from a version lower than 1.03.6


Netduma Admin
 Share

Recommended Posts

  • Administrators
  On 5/18/2019 at 7:26 AM, Alexandre said:
Please update my NetdumaR1 router from version 1.03.6g to the latest dumaOS firmware. Thank you
Expand  

I have forwarded this onto Joseph so he should send over the firmware soon. Keep an eye on the thread.

Link to comment
Share on other sites

it's been a while but im still on 1.03.5m, i can't access the page for the port forwarding of 7777 (was open when i last did it on november but not sure if it's now, tried clicking on the clickable text on the text guide but it redirects me back to the knowledge base)

hoping that upgrading to dumaOS will fix my portforwarding issue (used to work now doesn't, written a threat but no response)

Link to comment
Share on other sites

  • Administrators
  On 5/27/2019 at 9:01 PM, DarkDyllon said:

it's been a while but im still on 1.03.5m, i can't access the page for the port forwarding of 7777 (was open when i last did it on november but not sure if it's now, tried clicking on the clickable text on the text guide but it redirects me back to the knowledge base)

hoping that upgrading to dumaOS will fix my portforwarding issue (used to work now doesn't, written a threat but no response)

Expand  

You should first manually upgrade to the latest original R1 firmware here: 

then after that once you've received an email you can upgrade to DumaOS. Just to note upgrades are done manually by you, we just give you the link to do it, we don't upgrade it for you. 

Link to comment
Share on other sites

  On 5/28/2019 at 5:47 PM, Netduma Fraser said:

You should first manually upgrade to the latest original R1 firmware here: 

then after that once you've received an email you can upgrade to DumaOS. Just to note upgrades are done manually by you, we just give you the link to do it, we don't upgrade it for you. 

Expand  

ah ok, in any case i've upgraded to 1.03.6j, thanks.

Link to comment
Share on other sites

  • Administrators
  On 5/30/2019 at 4:58 PM, Donald said:

Please update my router from 1.03.3 to the latest firmware thanks.

Expand  

Hey, welcome to the forum! 

Have you ensured that you've followed this guide to make your router accessible? http://support.netduma.com/en/support/solutions/articles/16000085789-how-to-upgrade-your-r1-from-version-1-03-5m-or-lower

Link to comment
Share on other sites

  • Administrators
  On 5/31/2019 at 6:46 AM, Donald said:

That link takes me no where, I don't know how to make the router accessible 

Expand  

Okay well i'll copy the relevant section of the guide:

  1. Access your Netduma R1 interface
  2. Go to >Settings >Miscellaneous
  3. Tick ‘Allow remote access to Netduma tech support’
  4. Go to Settings >UPnP and enable the feature if it's not already enabled
  5. Go to Settings > Port Forwarding and remove any rules
  6. Now verify that everything is working by going to https://www.whatismyip.com/port-scanner/
  7. In the port entry field, type in 7777 and click Scan 
  8. If the result is 'Open' then you have successfully allowed us to access your router to run the fix. 
Link to comment
Share on other sites

  On 5/31/2019 at 9:42 AM, Netduma Alex said:

Okay well i'll copy the relevant section of the guide:

  1. Access your Netduma R1 interface
  2. Go to >Settings >Miscellaneous
  3. Tick ‘Allow remote access to Netduma tech support’
  4. Go to Settings >UPnP and enable the feature if it's not already enabled
  5. Go to Settings > Port Forwarding and remove any rules
  6. Now verify that everything is working by going to https://www.whatismyip.com/port-scanner/
  7. In the port entry field, type in 7777 and click Scan 
  8. If the result is 'Open' then you have successfully allowed us to access your router to run the fix. 
Expand  

The port should be open try sending the fix to my router when you get a chance 

Link to comment
Share on other sites

  On 5/18/2019 at 7:26 AM, Alexandre said:
Please update my NetdumaR1 router from version 1.03.6g to the latest dumaOS firmware. Thank you

 

Expand  

I was not able to send the hotfix, please make sure you have configured your router correctly.

Link to comment
Share on other sites

  • Administrators
  On 6/3/2019 at 10:59 PM, Donald said:

Ok thanks so much 

Expand  

Sorry about the delay, we're going to do it tomorrow now, for sure.

In the meantime please make sure that you've done everything in this guide so that we don't have any problems connecting:

http://support.netduma.com/en/support/solutions/articles/16000085789-how-to-upgrade-your-r1-from-version-1-03-5m-or-lower

Link to comment
Share on other sites

  • Administrators
  On 5/31/2019 at 8:55 PM, Donald said:

@Netduma Joseph can you send a hotfix to my router when you get a chance please. 

.

 

 

Expand  

Ok now you need to follow the rest of this guide to get your router up to date:

http://support.netduma.com/support/solutions/articles/16000085793-upgrading-your-netduma-r1-to-dumaos-from-the-original-r1-firmware

Link to comment
Share on other sites

  • 1 month later...
hello support yes you have not been able to connect to update my netduma r1 because I have change the dns by mistake but to my regret I do not connect at least the router is no longer detect by the computer it but so impossible to do a factory reset could help me on that to be able, be the update then thank
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...