Jump to content

Getting an A but not an A+ on DSLReports?


Recommended Posts

  • Administrators

Hi everyone, 

 

If DSLReports is giving you an A instead of A+ but you could get an A+ on the R1 why does this occur? Does that mean that Anti-Bufferbloat isn't working? 

 

The reason you do not get an A+ is because our enterprise level deep packet inspection analyses the first few packets of the test, this means that DSLReports misreads the result of the bufferbloat test. It is not Anti-Bufferbloat not being able to get an A+, it is DSLReports misreading our DPI as bufferbloat/latency when it is not.The XR500 also has hardware accelaration which means it is a seriously beast piece of kit meaning it can do QoS at gigabit speeds easily so it has absolutely no trouble mitigating local congestion. You're getting the best QoS on the planet so nothing to worry about!

 

If you want to know if Anti-Bufferbloat is actually working we recommend using PingPlotter (Here's a quick guide on how to use it doing the following tests):

  • Saturate your connection as much as possible (download, stream HD videos etc), then do a PingPlotter test and see how much your ping rises.
  • Then do the same test except all you do is set Anti-Bufferbloat to 'Always' and put the sliders down to 70/70. You WILL see a substantial difference here. 

Just to reiterate, bufferbloat (lag/latency) only occurs when your connection is saturated. With Anti-Bufferbloat enabled your network is never allowed to become saturated and therefore you do not experience bufferbloat. 

Link to comment
Share on other sites

  • Replies 151
  • Created
  • Last Reply

Thank you Fraser. Are there any tests being conducted with DPI disabled on the XR500 just to ensure that packets reach the host/client without inspection? Thanks in advance.

 

Shikko

Link to comment
Share on other sites

  • Administrators

Thank you Fraser. Are there any tests being conducted with DPI disabled on the XR500 just to ensure that packets reach the host/client without inspection? Thanks in advance.

 

Shikko

 

People have requested a DPI off button essentially so they can test this. A few features will be affected by this so it's something we'll look into carefully.

Link to comment
Share on other sites

People have requested a DPI off button essentially so they can test this. A few features will be affected by this so it's something we'll look into carefully.

That would be a good idea as to be honest the bufferbloat is absolutely useless for me on the XR500. I went 2 - 40 last night in sim's stream. No matter what I did I could not kill anything all evening but as soon as I disabled anti-bufferbloat and put my LEDE router in front of the XR500 to control bufferbloat instead, my bullets were on point. Not really impressed in having to set up my network this way, but I am hoping DPI will have a disable option in a future update.

Link to comment
Share on other sites

  • Administrators

That would be a good idea as to be honest the bufferbloat is absolutely useless for me on the XR500. I went 2 - 40 last night in sim's stream. No matter what I did I could not kill anything all evening but as soon as I disabled anti-bufferbloat and put my LEDE router in front of the XR500 to control bufferbloat instead, my bullets were on point. Not really impressed in having to set up my network this way, but I am hoping DPI will have a disable option in a future update.

 

Dpi on/off won’t  make a difference to this though - dsl reports is just getting confused and giving a false reading. 

 

Could you try Anti-Bufferbloat again tonight and see if last night was just a one off? Thanks BD!

Link to comment
Share on other sites

Dpi on/off won’t  make a difference to this though - dsl reports is just getting confused and giving a false reading. 

 

Could you try Anti-Bufferbloat again tonight and see if last night was just a one off? Thanks BD!

I can give it another try. Will play with sliders back at 70/70 but I am conviced theres something not quite right with the qos on the XR500. I will also try with just the netduma R1 tomorrow and then report back. :)

Link to comment
Share on other sites

  • Administrators

Thanks BD - it’s a highly tested feature so if there is an issue it’s an unusual one and we’d love to get to the bottom of it.

 

You don’t have IPv6 or PPPoE do you?

Link to comment
Share on other sites

Thanks BD - it’s a highly tested feature so if there is an issue it’s an unusual one and we’d love to get to the bottom of it.

 

You don’t have IPv6 or PPPoE do you?

no matey, i am on talktalk who is auto authentication

Link to comment
Share on other sites

it was unplayable again last night with just the XR500 again. Could it be anything to do with the v2.2.0.7rc2 hotfix I am running? 

ive unplugged my xr500 and gone back to the R1 as i know i can drop V2 rockets due to the connection been awesome on pre-emptive 50% down -65 % up on the sliders. just cant get the same connection on xr500.  

Link to comment
Share on other sites

  • Administrators

it was unplayable again last night with just the XR500 again. Could it be anything to do with the v2.2.0.7rc2 hotfix I am running? 

 

No that shouldn't effect it at all. Have you done a PingPlotter test with QoS enabled vs disabled when the connection is saturated on the XR500? If not I would recommend doing so. You will see the Anti-Bufferbloat is just as good if not better than the R1.

 

ive unplugged my xr500 and gone back to the R1 as i know i can drop V2 rockets due to the connection been awesome on pre-emptive 50% down -65 % up on the sliders. just cant get the same connection on xr500.  

 

From the 1 on 1 we had there is nothing wrong with your XR500 settings, did you change them since I had a look?

Link to comment
Share on other sites

No that shouldn't effect it at all. Have you done a PingPlotter test with QoS enabled vs disabled when the connection is saturated on the XR500? If not I would recommend doing so. You will see the Anti-Bufferbloat is just as good if not better than the R1.

 

 

From the 1 on 1 we had there is nothing wrong with your XR500 settings, did you change them since I had a look?

hi fraser, nothing has changed i have been in so many lobbies on live stream and quit the game completely due to me getting shredded because of the bullet reg. my shots are on point but they are like 2 shot kills me. even though on my screen i have hit them 4 times plus at close range. a couple of members from this forum have come into my streams and asked how did i die when i shoot them. sometimes i can unload a full magazine into them and the last bullet will kill them. I did a ping plotter test yesterday after stream as it was only a 20minute stream as i 

 game. but im losing 75% packets at hop 4 everything else no packet loss? 

Link to comment
Share on other sites

No that shouldn't effect it at all. Have you done a PingPlotter test with QoS enabled vs disabled when the connection is saturated on the XR500? If not I would recommend doing so. You will see the Anti-Bufferbloat is just as good if not better than the R1.

 

Yes I tried it with sliders set at 70 and still aweful hit detection. I was talking to zennon on xbox party chat and have altered my traffic priority to a custom 1 with xbox selected rather than the default dumaOS classified games. I dont think it is a bufferbloat issue rather the DPI causing it. I am running out of things what could be causing it. 

Link to comment
Share on other sites

Yes I tried it with sliders set at 70 and still aweful hit detection. I was talking to zennon on xbox party chat and have altered my traffic priority to a custom 1 with xbox selected rather than the default dumaOS classified games. I dont think it is a bufferbloat issue rather the DPI causing it. I am running out of things what could be causing it. 

I would set back up modem > XR500 run a ping plotter while you game and you will see there is no ping fluctuation.

 

DSLReports is not a good yard stick to test by especially as it is reporting the DPI as a spike when in reality there is no spikes, plus testing locally to destination and back is a true test.

Link to comment
Share on other sites

  • Administrators

hi fraser, nothing has changed i have been in so many lobbies on live stream and quit the game completely due to me getting shredded because of the bullet reg. my shots are on point but they are like 2 shot kills me. even though on my screen i have hit them 4 times plus at close range. a couple of members from this forum have come into my streams and asked how did i die when i shoot them. sometimes i can unload a full magazine into them and the last bullet will kill them. I did a ping plotter test yesterday after stream as it was only a 20minute stream as i 

 game. but im losing 75% packets at hop 4 everything else no packet loss? 

 

That is not necessarily lag in the traditional sense. Can you include a video snippet of a typical game to show us what you're talking about? We can't diagnose based on gameplay, only on ping but this may help us. Does the graph on PingPlotter show red lines for packet loss? If so that is an ISP issue so you'll definitely need to contact them.

 

Yes I tried it with sliders set at 70 and still aweful hit detection. I was talking to zennon on xbox party chat and have altered my traffic priority to a custom 1 with xbox selected rather than the default dumaOS classified games. I dont think it is a bufferbloat issue rather the DPI causing it. I am running out of things what could be causing it. 

 

As Zennon said above do the PingPlotter test to see if Anti-Bufferbloat is working or not. Are you actually getting lag or just hit detection? Have you moved your Geo-Filter to force a different server?

Link to comment
Share on other sites

On Cod WW2 PS4 is the main game i play. and i will clip a video tonight as i need to go on my twitch past streams.  or i can can record both my gameplay and dumaos dashboard and post you that?

pingplotter the graph at the bottom doesn't show and red lines only the top right hand of the page which shows me the packet loss on hop 4. 

Link to comment
Share on other sites

hi fraser, got a major problem. i am trying to run ping plotter and watch a 4k video on youtube with the QoS turned off and the im getting major buffer. could this be the problem? 

as when im live streaming to twitch and youtube and watching the video on youtube that i living streaming and also gaming? could this cause the problems im having?

Link to comment
Share on other sites

  • Administrators

hi fraser, got a major problem. i am trying to run ping plotter and watch a 4k video on youtube with the QoS turned off and the im getting major buffer. could this be the problem? 

as when im live streaming to twitch and youtube and watching the video on youtube that i living streaming and also gaming? could this cause the problems im having?

 

That's because you're not running QoS, you're essentially saturating your network which is causing lag. That is expected behaviour when not using QoS. Use QoS and that problem should disappear!

Link to comment
Share on other sites

 

As Zennon said above do the PingPlotter test to see if Anti-Bufferbloat is working or not. Are you actually getting lag or just hit detection? Have you moved your Geo-Filter to force a different server?

I ran a pingplotter with sliders at 70 and started a movie stream and graph was fine, just the usually 2-3ms increase.....so I have put my xr in AP mode behind my R1, connected my xbox to R1 set geo location and had some great games. Zennon was on for a few of them and i got a 38-6 score on 1 of my games. I am at a loss to what it is as my gaming experience was totally different to what it was on the XR...........could it be the hotfix version on my XR?

Link to comment
Share on other sites

  • Administrators

I ran a pingplotter with sliders at 70 and started a movie stream and graph was fine, just the usually 2-3ms increase.....so I have put my xr in AP mode behind my R1, connected my xbox to R1 set geo location and had some great games. Zennon was on for a few of them and i got a 38-6 score on 1 of my games. I am at a loss to what it is as my gaming experience was totally different to what it was on the XR...........could it be the hotfix version on my XR?

 

Yeah that just reiterates the point that just because you get a certain grade on DSLReports doesn't mean it's not working. Sounds like it's working optimally. No the hotfix shouldn't affect that at all. Are you getting the same ping as shown by the Geo-Filter on both? If so then there is no reason the XR500 would give a worse experience than the R1.

 

https://share.pingpl...PJkWS9CSMsT.png

 

thats what i get with QoS on with a 2 4k videos running in the background with pingplotter

 

QoS is definitely working otherwise it would have been much worse but there are some small spikes there. It may be that setting to 70% is either too much or too little. Experiment with the percentages to find one that minimises the spikes as much as possible.

Link to comment
Share on other sites

Yeah that just reiterates the point that just because you get a certain grade on DSLReports doesn't mean it's not working. Sounds like it's working optimally. No the hotfix shouldn't affect that at all. Are you getting the same ping as shown by the Geo-Filter on both? If so then there is no reason the XR500 would give a worse experience than the R1.

 

 

 

The ping is the same 10 - 12ms when it pings a server. I know what you are saying and you are right, but my experience is different. I am going to play a few games now it is peak time but I am on the same ISP as zennon and hes said they are not prone to network congestion. 

Link to comment
Share on other sites

  • Administrators

The ping is the same 10 - 12ms when it pings a server. I know what you are saying and you are right, but my experience is different. I am going to play a few games now it is peak time but I am on the same ISP as zennon and hes said they are not prone to network congestion. 

 

Okay, that or the server you're playing on is the only conclusion of why your experience is not as good. ISP congestion will always be worse during peak times as well. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...