Netduma Liam

Cela arrivera une fois que nous aurons publié le firmware R2, après quoi nous porterons les mêmes modifications mais quelques modifications spécifiques à R1 sur le R1 et publierons un firmware pour cela.

Sure! Assuming we can capture it OK, it should be on Ping Heatmap later today.

OK, thanks for letting us know, we've got a new firmware coming out very soon for the R2 so that should definitely help with the problem!

OK, glad to hear it was able to get through the boot process properly then. I believe it's more a case of residual power draining rather than heat, although it's never a bad idea to give it a little more ventilation! Let us know if you run into any other problems with it.

OK, thank you. Could you please try Fraser's last suggestion and see if that helps?

I can certainly understand your frustration, we understand that screenshotting your config isn't a feasible solution, more just a suggestion to help a user in the meantime. I'll also raise the problem with the team again to bring it to the forefront, I'll get someone to replicate it and investigate why it occurs from a backend perspective.

To clarify, are you experiencing this on an R2 or on an XR500? What firmware version are you currently running?

Not sure, we found a bug while testing it so the devs are currently working on fixing that now. Once that's done we'll re-test it. After that, it'll go out to beta testers first before we can fully release it.

Cool idea! In the mean time you could probably just unplug the WAN cable and reconnect it again? Unfortunately there isn't a bridge mode currently available on the R2.

We've been working super hard and are now testing new firmware, it shouldn't be too much longer before we can release one!

It's not possible currently I'm afraid, what's the reason for needing to do this?

We're aware of this and we're looking for a permanent solution to the problem, it's caused by Activision updating their server information every day, it's not your router. I don't have an ETA for when it'll be fixed but we're working on it!

Sorry to hear this, I've responded to you in the other topic you commented on. If you wanted to return the R2, email us over at [email protected].

Awesome! Thanks for letting us know

I've sent you a PM

Welcome to the forum! Yeah it's back on Google Play Store, it never went anywhere on iOS.

OK, looks to me like you've got CG-NAT there, if you check out the bottom of the guide Fraser sent you, I'd suggest contacting your ISP to see if they can opt you out of this.

OK great no worries, I think I've responded to your offline message this morning so let us know if you need anything else!

Could you please take the AT&T out of passthrough mode and instead put the R1 WAN IP in the AT&T DMZ. Then make sure the WAN IP for the R1 is reserved from the AT&T interface so it won't change again in future. You may need to reboot the R1 after making these changes for your NAT type to then appear open.

OK, that will be the reason then. QoS is limiting your speed in order to ensure priority devices get enough bandwidth, you can set this to Auto-enable if you want to have your full bandwidth when not gaming.

Adblocker relies on some of the features of QoS for inspecting traffic, in theory it shouldn't be too difficult to have Adblocker work independently of QoS so that's something we aim to do in future.

Can you both please go to the three-line menu in Ping Heatmap and hit Resync Cloud, it should be fine for you then.

Thanks for the feedback, glad you're enjoying it!

I've responded to your other post, I'll leave this open for now in case any members of the community want to chip in.

As mentioned above, it's not the intended purpose of DumaOS and it's not something we've tested. Unfortunately you're not going to find the answer you're looking for on our forum. We'd suggest setting a radius in Geo-filter around your local country and ensure you're always getting connected to the lowest ping servers possible, that's how you'll get the best performance in game. Check out this guide for a detailed setup for Geo-filter: http://support.netduma.com/support/solutions/articles/16000077072-dumaos-optimal-settings-guide-geo-filter