Boldshoter30

That would be really cool, I'm not sure if that's something we'd go for, as you said it would take a long time to do but never say never!

I've given you Early Access for the R3, try the new firmware we just posted on Friday and see if that's any more stable for you.

Is there a mac version for this like to test if not it whatever not going to blow my brains testing mtu

I noticed a improvement with latency and not rubber banding being shot around corners I have tested MW2 on several occasions other servers, with the MTU set at 1472 on the R2, my packets were fragmented at 1500 so I went with 1472, and left it alone, you can test your MTU from this link to download  TCP Optimizer :  https://www.speedguide.net/downloads.php , look for the least fragmented mtu size and set according in your router of choice, but lower don't mean better unless instructed by TCP optimizer make sure you run it as administrator on your desktop computer to test, I have noticed as well its not a placebo, it works and has been proven by hundreds of people to help with latency, and packet loss, I tested a server thousands of miles away which I would lag bad on which hit reg was raised, but seemed more stable in game, didn't die in BS ways, its not a solve all fix all, or will fit everyone's isp internet setup, so test according, some speculate that MTU does little to nothing, which also been proven to help, may not be consistent, based on your bufferbloat, incorrect QOS, running wifi for gaming console, or pc, or other unknown issues packet loss on ISP side, to many devices on network,     

I can certainly pass that on to get tested/added. If you're on console then Games Console or gaming as a whole will prioritize it. I believe it does work with the Geo-Filter, if you're on PC you'll need to give it the PlayStation device type in the Device Manager and then add it to the Geo-Filter with the manual option.

Added!

As you say, it's something that will void your warranty. Even if your R2 suffers a hardware failure, we always do our best to ensure we can assist and are often able to provide replacements in these circumstances. However, opening up the R2 and doing this will prevent us from being able to do that for you.
The team are aware of the maximum temperature before performance will be degraded for the R2, and it's operating temperature is well within that. Making a cooling modification like this will have a negligible impact on performance and has a lot of risk associated with it. Of course, you can use those fans and place them under the R2 with a  gap between the fan and R2. As long as you're sensible with it I don't see a risk there. I'd advise against opening up the R2 though, the positioning of the chips will make it difficult to add a heatsink like the ones you've screenshotted and there's a lot of risk of damage.

Id have to agree with Liam on this.. You could use a fan. But I just dont think theres any room to add such a heatsink.. Unless you plan on leaving the R2 out of its case.. Go full nude! lol! I havent had mine apart but the most heat seems to be on the bottom center of the router. Which almost suggests the CPU is mounted there.. Which really leaves no room for such a heatsink.. 
Good luck with whatever you do! 
Zippy.

thank you Fraser

thank you Fraser

thank you Fraser

I've approved you so you can access the Early Access forum now, we're working on DPI separately and running a test at the moment, it won't be long before it hits your router and you should then notice an improvement.

Which rule is this referring to exactly? The error message is appearing because you haven't selected any ports to be in the group.
Perhaps if you could let us know your use case here, and why you need to set this up, we can offer some more help in getting it working for you?

Good plan, still a good little router and someone will definitely enjoy having it while you enjoy the better hardware!

I will Fraser 🙂🙂 will just patiently wait thank you as well with being more on you tube with the progress of updates etc to let the Netduma Community know of progress on firmwares and features

These things are certainly possible, we are currently working on the next iteration of QoS and I would say that it's pretty next level. When it is available (no ETA), give us your thoughts on it and whether you think these suggestions would still be a worthy addition and something you'd like to see and we can certainly look into it.

still have yet to receive the DUMAOS 3.0 beta email for the XR500 or R1 but patiently waiting 🤔🤔

just pre ordered the NETDUMA R2 with part of my stimulus check 😁💥💥😁😊

you're welcome  Fraser

That's certainly plausible, I've passed it on to the team! Glad to hear you like what we're offering. It's definitely our biggest update to date and will pave the way for more features to be added much more easily.
Invites are still being sent out so always the chance you'll get it before the R2 ships but thank you for the support, we really appreciate you sticking with us for this long!

Pre ordered with part of my stimulus check 😁😁

WHAT A LOVELY DAY!
https://www.youtube.com/watch?v=8-Q-_yuAnX4

Pre ordered with part of my stimulus check 😁😁

Pre ordered with part of my stimulus check 😁😁

Hi Everyone - the Netduma R2 has arrived:

The R2 has been built for DumaOS 3.0 from day one and is available for pre-order now, including a launch discount for early orders. As our latest in-house router, we will be able to deploy the next wave of DumaOS features to the R2 first.
The R2 will officially ship from August 6th.
https://www.netduma.com/order/netduma-r2/
From all of us at Netduma, thank you for your continued support over the years. Without you, none of this would be possible.
Finally - to the R2 beta testers. THANK YOU.
The ND Team