rehoboth Posted September 15, 2017 Posted September 15, 2017 I'm on looking to upgrade but want to be sure my router is ready. I have remote access ticked. Please reply with further instructions.
Codboss Posted September 17, 2017 Posted September 17, 2017 Hi I have remote support ticked. And I would like to upgrade.
ghorman Posted September 17, 2017 Posted September 17, 2017 My firmware is 1.03.3. Can you please check mine so I can upgrade? Looks like firmware 1.03.3 doesn't support Support Tickets -Scott
Netduma Staff Netduma Jack Posted September 20, 2017 Netduma Staff Posted September 20, 2017 Still no news regarding the Update ? I can confirm the update is happening tomorrow, between 10am and 2pm (BST).
DARTHXX Posted September 20, 2017 Posted September 20, 2017 Oh time and day has changed? Ok then tomorrow!
Netduma Staff Netduma Jack Posted September 20, 2017 Netduma Staff Posted September 20, 2017 Oh time and day has changed? Ok then tomorrow! It has I'm afraid - it's down to Iain who happens to be the busiest guy in the office! He's pretty desperate to get this done though now so I'm positive you'll be upgraded tomorrow morning. I'll make sure to nag him extra hard, haha.
DARTHXX Posted September 20, 2017 Posted September 20, 2017 Hahaha well i will be at the Office Working during this time... So do not be that Hard to him! Will i be able to upgrade to the Last Firmware or do i Have to do Steps?
DestUndead Posted September 21, 2017 Posted September 21, 2017 Hm so again nothing... Did you expect it to be any different?
Netduma Staff Netduma Jack Posted September 21, 2017 Netduma Staff Posted September 21, 2017 i have version 1.03.4 and I would like to upgrade to the newest version thanks You're good to go. Please do not reboot before upgrading. I am on an older version than 1.03.5 and have remote support ticked and that you want to upgrade. You're good to go. Please do not reboot before upgrading. Hello. I am running version 1.03.3. Help me please You're good to go. Please do not reboot before upgrading. http://forum.netduma.com/topic/11018-major-netduma-upgrade-now-available-v-1036/ You're good to go. Please do not reboot before upgrading. 1.03.5m looking to upgrade - I can go ahead and update or wait for instructions like those pre 1.03.5m? We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Im I good to upgrade? We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Hello There, I made a New Account because i was not getting a Validation Email to my email account... With this Email account i got it instantly, so please if there is a possibility then delete the other Account DARTHX. I have talked to Fraser and Jack regarding getting the actual Firmware. But it seems that fraser is on vacation now! I really would like to be able to use the full potential of my Duma as soon as possible... It would be really nice if the update could be done soon. At the Moment i am on 1.03.3! You're good to go. Please do not reboot before upgrading. Hi im on 1.03.6h and my router reboot a lot for no reason when i apply settings and some times settings dont apply ... now i get a lot of errors messages and the router is getting slower every days ... Help ! (Some time after reboot the router is fine ) should i update to fix it ? You're on the latest version. Please post a thread in the general support section of the forum and we'll be happy to help out. For now, make sure cookies are enabled, always reboot from Miscellaneous settings, and please let us know what the error messages are when you make your thread. Hi, please could I request an update? Thank you. We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Hi, please could I request an update? Thank you. We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. My firmware is 1.03.3. Can you please check mine so I can upgrade? Looks like firmware 1.03.3 doesn't support Support Tickets -Scott We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous.
Netduma Staff Netduma Jack Posted September 21, 2017 Netduma Staff Posted September 21, 2017 Did you expect it to be any different? Hm so again nothing... Sorry about the wait guys, there was a server issue we had to solve before being able to run these upgrades. We should be able to do this more frequently again now.
zWhiteShepherd Posted September 22, 2017 Posted September 22, 2017 I am running 1.03.3 and would like to upgrade. Remote service selected, thanks.
emmanu Posted September 22, 2017 Posted September 22, 2017 Hi i need to update my router. My actual version is R1 debug version 1.03.3
DestUndead Posted September 22, 2017 Posted September 22, 2017 So are you guys going to put out the update today like you said three days ago or is it going to be tomorrow like you said two days ago?
Mr.Stallion0013 Posted September 22, 2017 Posted September 22, 2017 This is not for the dumaOS update. It's for people still on the older versions. If that's the update you are referring to.
DestUndead Posted September 22, 2017 Posted September 22, 2017 This is not for the dumaOS update. It's for people still on the older versions. If that's the update you are referring to. Lame. Thanks. Maybe it will happen sometime in the next couple of years.
rohammadali Posted September 25, 2017 Posted September 25, 2017 I am on version version 1.03.4 and would like to upgrade.
JJP Posted September 25, 2017 Posted September 25, 2017 Hi, I am on 1.03.3 with remote access ticked. please let me me know if I can update
The_Fro Posted September 27, 2017 Posted September 27, 2017 Im wondering if i should upgrade? on R1 debug version 1.03.3 running on rb-951g-2hnd didnt want to bork my router
GrandHokie98 Posted October 1, 2017 Posted October 1, 2017 I am running 1.03.4 and would like to update. Setup is: modem -> router -> netduma currentlyI cannot change settings of modemRemote service is checked on netdumaIP of netduma added to DMZ of router and UPnP is disabled. No port forwarding selected.
Administrators Netduma Fraser Posted October 3, 2017 Author Administrators Posted October 3, 2017 I am running 1.03.3 and would like to upgrade. Remote service selected, thanks. You're good to go. Please do not reboot before upgrading. Hi i need to update my router. My actual version is R1 debug version 1.03.3 We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. I am on version version 1.03.4 and would like to upgrade. You're good to go. Please do not reboot before upgrading. Hi, I am on 1.03.3 with remote access ticked. please let me me know if I can update We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Im wondering if i should upgrade? on R1 debug version 1.03.3 running on rb-951g-2hnd didnt want to bork my router I have PM'd you. I am running 1.03.4 and would like to update. Setup is: modem -> router -> netduma currently I cannot change settings of modem Remote service is checked on netduma IP of netduma added to DMZ of router and UPnP is disabled. No port forwarding selected. I have PM'd you. -- I would like to mention also that I'm now able to do the required upgrade checks myself so I can do it much faster now.
Wintercabin Posted October 3, 2017 Posted October 3, 2017 I am on R1 debug version 1.03.4 running on rb-951g-2hnd . What are my next steps??
rehoboth Posted October 4, 2017 Posted October 4, 2017 I have a TC8715D ISP router. I ensured that the ipv4 ip address for the NetdumaR1 was entered into the DMZ (enabled) feature of my TC8715D and that port forwarding was disabled on it. I made sure that my NetdumaR1 had the remote support feature checked. Can you recheck and setup my R1 router to be upgraded?
Administrators Netduma Fraser Posted October 4, 2017 Author Administrators Posted October 4, 2017 I am on R1 debug version 1.03.4 running on rb-951g-2hnd . What are my next steps?? You're good to go. Please do not reboot before upgrading. I have a TC8715D ISP router. I ensured that the ipv4 ip address for the NetdumaR1 was entered into the DMZ (enabled) feature of my TC8715D and that port forwarding was disabled on it. I made sure that my NetdumaR1 had the remote support feature checked. Can you recheck and setup my R1 router to be upgraded? You're good to go. Please do not reboot before upgrading.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.