Comp0za

with latest official firmware for XR500, I haven't had any dhcp disconnects since when it came out. Hopefully it will stay like that

Should have pushed by now but if not resync the clouds and it should work

We have identified the cause, it's a cloud issue not a firmware issue, we're working to resolve it

Thanks again for the logs, now the holidays are over they should be able to investigate it more thoroughly

This specific error typically indicates that the Deep Packet Inspection (DPI) classification service has crashed but is automatically set to restart. 
Reboot the Router:
Sometimes, a simple reboot can fix temporary issues with the services. Power off the router for 1–2 minutes and then turn it back on. If the crashing is not affecting your internet performance significantly, you can leave the process to restart automatically.

Good answer above - if you're not noticing an issue alongside the log you can ignore it

This is sad that we bought these router and was taunted these great beta features only to have them give up on us so they can focus on their own platform the R3. It’s almost like we’re just the community of test dummy’s. Just give us a working firmware with these features and we will all be happy. 

I play efootball I have an XR1000 and I don't have full knowledge of it there there is a feature to know the opponents before the start of the match how can I access it. I am from the Middle East

@Comp0zaIf I were you I wouldn't do so as your location is still going to be exposed by the server regardless of course that varies by game and the downside is that it slows your connection to the server since it has to go through a wall etc.

As above, if someone uses tools to be able to see your IP address your NAT type won't matter. IP databases are never super accurate, checking my own IP address location using a variety of databases it thinks I'm anywhere from 15 - 100 miles away from my actual location.

next time I will directly buy DumaOS routers like R2 or R3. This dependency on Netgear is not good for users atall.

Attention XR450 users!
We're happy to announce the 3.3.535 firmware has made its way over to the XR450 in Open Beta stage.
We're hoping for NETGEAR to run this firmware through their QA process and eventually make it an official release. In the meantime though, you're free to use this as a beta firmware.
3.3.535 adds support for the new DumaOS For Mobile - a flexible view that works in virtually any viewport, with massively improved response times and speed. This is best experienced via the DumaOS app which, as of this firmware, fully integrates the webview format for any platform that supports it.
---
NOTE: This step must be completed first prior to upgrading to the latest firmware.
However, due to an firmware size limit, there is an important one-off step you need to take before moving over to the latest firmware.
Please download the below intermediary firmware, and upgrade your XR450 to it first: 
https://www.dropbox.com/scl/fi/enrkjnl4jfl55irx562m2/XR450-V2.3.2.136.img?rlkey=5axamybfpdxh9p6tadwjghh0f&dl=0
It's important that you DON'T keep your XR450 on this intermediary firmware - there are known issues with it. 
If you're unsure how to get to the upgrade screen, this video from YourSixStudios does a good job explaining:
Once that's done, you can go ahead and install the latest firmware which can be found here: 
https://www.dropbox.com/scl/fi/nk3iikz1jast4ai3gzp6s/XR450-V2.3.2.134-dumaos33-rc14.img?rlkey=vednewrueb6oxoc7lgrprwci7&dl=0
This firmware also contains multiple fixes and improvements to DumaOS and we're confident in it as a candidate for NETGEAR to release fully for the XR450. All of us here hope you enjoy using it.

Sorry to hear Liam has moved on, a real gentleman when we communicated. I wish him the very best on his next venture.

Oh sad to hear that Liam has left the company 😕 Okie I am actually visiting the page every once a week and it was wondering what happened, but now I am know what's happening, thanks for the update Fraser.

It's good that you can decide the ping, but why not decide which lobby you get with NetDuma? You have the power to influence EOMM and why not give us the opportunity to decide which lobbies we get, a function/ability like geo fencing? I'm considering to get a VPN and I'm soo tired of the sweaty players sweat 24/7 and with all that sweat they should go to gym sweat their asses off there instead. I'm getting punished by playing Modern Warfare 2. And I'm tired of it..

it's a known issue with DHCP lease time, the firmware is still broken, hopefuly, Netgear will resolve it soon.

We've been doing a lot to automate it as much as possible but there are still aspects that require manual intervention, the hope of course is to make it completely automatic

It's been several days that Modern Warfare 2 on Ping Heatmap isn't showing any servers. Are there gonna a fix for that any time soon?

It's been several days that Modern Warfare 2 on Ping Heatmap isn't showing any servers. Are there gonna a fix for that any time soon?

Yes we will do a cloud update, due to the holidays we're not able to do it as quickly as usual, we should be able to do so on Tuesday.

I would like to beta test the XR500! Sign me up!

Same . Only Reason i got the XR500 is because Import Duty is high in India.  Should have just spent a little extra and got it . I Understand that they have to wait for netgear to approve it , but i dont see why they cant upload it here naming it as Beta .  Hopefully the new firmware comes soon.

It's not been our focus for this next version as we've been really motivated to resolve the memory issue and much more general stability improvements. So the next version will be a lot better, it's unlikely those changes will have resolved that so we can look at it for the one after next.

Yes in one location there can be many servers that cluster together so if you block one in that location it won't block all of them

Thanks for letting us know, I'll pass it onto the team, Happy Holidays!