FQs19 Posted September 2, 2015 Posted September 2, 2015 Using xbox 1 playing CoDAW Open NAT covering all of USA PA at 20ms Strict mode On Bleeding Edge On and applied Can't find a single game I can find a game if Strict Mode is Off
PharmDawgg Posted September 3, 2015 Posted September 3, 2015 I can't believe this is a player count issue. Not the whole US. Try this if you haven't already. Go to Setting>Misc and make sure Enable auto cloud/Bleeding edge has not been deselected and Click Apply Cloud Setting to reset the servers. Also reboot the R1 and restart the web browser you're using.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 Auto Cloud is enabled and I have applied multiple times. I've restarted the R1 about 5 times so far. Restarted and refreshed Chrome also.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 I should be able to get a game with PA at 0 since I'm covering the entire USA
PharmDawgg Posted September 3, 2015 Posted September 3, 2015 On your R1 disable both consoles. Restart the console you will be gaming on. Start up AW and before you try to find a lobby enable the R1.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 I'm going to reinstall the latest R1 firmware also.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 Couldn't reflash the firmware. Gave an error stating that it the firmware was already installed. So I'm factory resetting it.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 Still not able to find a game. Find it really difficult to believe that I must include these Locked Hosts to play this game. I understand those Hosts are probably in the wrong location but why do I have to include those Hosts to find 1 game?
BENORMOUS Posted September 3, 2015 Posted September 3, 2015 What game mode are you trying to play?I only cover the uk and manage to usually find 2 groundwar games even though AWs dead now,it happened to me the other week and I just reaplied the cloud settings and found a game straight away,I also leave my PA at around 50ms at all times
Administrators Netduma Fraser Posted September 3, 2015 Administrators Posted September 3, 2015 I know you said you applied auto cloud but did you include bleeding edge cloud as well?
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 Yes, Bleeding edge was included as well Fraser. I started finding games but I have to wait about 10-15 mins.
Alex49H Posted September 3, 2015 Posted September 3, 2015 I usually hit Apply when I start a game under the Misc Setting Auto Cloud and Bleeding Edge. That sometimes helps to show the servers. I also turn Strict Mode off when it says No Games Found and it may take a minute or so before searching for games. But if it is AW I am sure the population is low.
FQs19 Posted September 3, 2015 Author Posted September 3, 2015 I have to leave Strict Mode On because it keeps connecting me to a dedi that spikes to 400ms.
Administrators Netduma Fraser Posted September 4, 2015 Administrators Posted September 4, 2015 Can you take a picture of the top half of the Geo-filter please
FQs19 Posted September 4, 2015 Author Posted September 4, 2015 Hey Fraser, I am finding games now. It just takes a long time. I had to Factory Reset the R1 a bunch of times to get it to work. I tried to reflash the current firmware but couldn't because I get the error Firmware Already Installed. Is there any possibility that in a future update that we could reflash the current firmware? A lot of times firmwares might not be cleanly installed so a reflash is in order. I'm not sure if just Factory Resetting the device is working.
Administrators Netduma Fraser Posted September 5, 2015 Administrators Posted September 5, 2015 Possibly I can ask Iain about this however settings > misc > factory reset should do the job just fine
Netduma Staff Netduma Crossy Posted September 5, 2015 Netduma Staff Posted September 5, 2015 I think if you uncheck 'check version' you can re-flash the same FW. But Iain has said in the past not to do it and also that if a flash had gone bad the router wouldn't operate at all - so I don't recommend doing that
FQs19 Posted September 5, 2015 Author Posted September 5, 2015 Thanks Crossy. I guess I'll just hold off on doing anything to it until the next update comes out. Hopefully that flash works.
FQs19 Posted September 8, 2015 Author Posted September 8, 2015 Thanks for the help fellas. You can close this post. Several Factory Resets seems to have cleared everything up. Setting the sliders at 70% also seems to be helping.
Zennon Posted September 8, 2015 Posted September 8, 2015 Great news, i will close the thread for you.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.