Xr 500

[Krush]

This may be the problem, back to automatic!

Also restart the main router! There is bound to be something blocking access, you have to proceed step by step, turn off and restart the devices 1 by 1, starting with the one that is furthest upstream!

[Netduma Fraser]

Use the IP to access rather than routerlogin.net and see if that works

[Bul]

“Non corre”  questa è la scritta che esce da circa 3-4 ore .. sono 4 ore che riavvio tutto 

[Netduma Fraser]

Reupgrade through 10.0.0.1/adv_index.htm to get access then going forward reboot in the way I mentioned or from the interface, not by pulling power

[Bul]

I set the serial number of the router and ok, immediately after it asks me to answer the secret questions that I have set personally and it gives me an error, I will never get out of it ....

[Netduma Fraser]

9 minutes ago, Bul said:

I set the serial number of the router and ok, immediately after it asks me to answer the secret questions that I have set personally and it gives me an error, I will never get out of it ....

It should only be asking that if you've entered the login credentials wrong or press cancel on it. If you really can't get past it then you'll have to factory reset.

[Bul]

Avevo già fatto i passaggi iniziali della programmazione, li ho rifatti come hai detto tu e ti invio la foto, sono completamente bloccato al punto iniziale

I restart the router :”DUMAOS IS NOT RUNNING”

[Bul]

Is there any way to go back to the previous version? I don't want to try the betas anymore, and the second time I have a problem that takes me a day +

[Netduma Fraser]

Yes you can downgrade using the 10.0.0.1/adv_index.htm page

[Bul]

i installed the initial version and always went back to the same version of the rc14 beta now everything works

[Netduma Fraser]

Latest public is .134 https://kb.netgear.com/000064857/XR500-Firmware-Version-2-3-2-134

[Bul]

Ho installato l'ultima beta e ricaricato il backup, nulla dice che tutti i dispositivi sono guasti e VPN con codici di errore .

quel firmware che dici basta lo aggiungo ? 

[Bul]

Ho messo la tua versione continua a darmi questi errori i dont know whats going on, i reset restarted and it keeps giving me the same errors

[Netduma Fraser]

Do not reload the backups, if you're going to do a factory reset for an issue it's best to start fresh, loading backups can basically re-introduce issues that you've essentially saved like that last one I can tell that will definitely be because of a saved config. So you'll need to factory reset and set it up clean, it won't take long and it should work a lot better.

[Bul]

I ended up in another loop, I reset the router twice and it keeps giving me this error, I don't know what to do anymore and since this afternoon I've been wasting my time

[Bul]

Device not found 

[Bul]

i solved the problem by logging in from the phone and clearing the source of the error

[Netduma Fraser]

39 minutes ago, Bul said:

i solved the problem by logging in from the phone and clearing the source of the error

Well done for getting it sorted, how are you factory resetting exactly?

[Bul]

I have reset through the site is the hole behind the router with no results, now everything is ok thanks

[Bul]

as regards the predisposition that I have at home: modem isp tim -> router xr500, can I change it? I insert the tplink (fiber optic to rj45 adapter) and then xr500? I don't know if the xr500 router will pick up the home phone's voip data

[Netduma Fraser]

22 hours ago, Bul said:

as regards the predisposition that I have at home: modem isp tim -> router xr500, can I change it? I insert the tplink (fiber optic to rj45 adapter) and then xr500? I don't know if the xr500 router will pick up the home phone's voip data

In theory you should be able to do that yes. I'm not sure in regards to VOIP but toggling the SIP ALG option in WAN Settings if it isn't working may help.

[Bul]

if this plan fails I would like to buy a fiber optic modem with good wi-fi, can you recommend a fiber optic modem?

[Krush]

To obtain VOIP, the router must have asterisk pre-installed (or else),... which is not the case!

So you can forget about your phone line behind!

[Bul]

so if I do this operation the telephone line may not work, any suggestions?

[Netduma Fraser]

3 hours ago, Bul said:

if this plan fails I would like to buy a fiber optic modem with good wi-fi, can you recommend a fiber optic modem?

We don't have any specific recommendations, any that support your speeds and have a WiFi standard you would benefit from will be good.